Bematech BR-2008T User manual

lmportant Notice
This Quick start Guide is a short description of the bar code scanners BR-2008T and
5.2008I, ¡ncluding basic information regarding installation and operation. For detailed
configuration information on th¡s product, please check the User's Manual available at our
webs¡te "Support" section: www.bematechus.com
No warranty of any kind is made in regard to this material, including, but not l¡mited to,
impl¡ed warranties of merchantabili§ or fitness for a particular purpose. We are not
liable for any errors conta¡ned herein or incidental or consequential damages ¡n connection
with furn¡shing, performance or use of this material.
Laser safety (model S-2008T)
The laser scanner compl¡es with safety standard IEC 60825-1 for a Class 2 laser produce.
Charging the Device
il¡ilililililll] iluiltilililffiffill]
Start Scanner SPP Master enable
3. Scan "Set wireless address" to set the address.
iluiltilililffiiltilll]
Set wireless address
(§PP Master only)
4. Use the ASCII table ¡n previous section to input the 12 digit wireless
address. For example: ifthe address is "01181345600",scan"U',"d',
scan the address lable if available.
ffi
llJ'.,..,.....4,
KL8+RD
+
Power On/Off the Device
Ensure the battery is fully charged. Please refer to the previous section
to charge the battery.
Press and hold the Power Button for 1 second until a long beep sound
is heard to turn on the scanner.
To power off the scanner press and hold the Off Button for 1 second
until 2 short beeps are heard.
1.
3.
lnstalling Battery
1.. Unlock and remove the back cover then insert the battery.
Warning:
Do not open with force.
Please unlock before
2. Place the back cover back on the scanner and move the lockto the lock
position.
Chareine the Battery
There are two method to chárge scanner via USB cable.
O Host USB Power
O Poweradaptor
1. Connect the micro USB connector d¡rectly to the scanner.
2, Connect the other end of the USB connector to the host to begin
charging. You can also connect the USB cable to an outlet using the
power adapter to charge the battery.
3. The battery begins charging when the scanner LED indicator starts
flashing. LED turns steady green when charging is completed.
§eg-rcsterl4gdC {Scanner as H ost}
1. Power on of the remote device and have its address ready in hand and
make it discoverable.
2. Program the scanner with the "SPP Master enable" barcode.
ilfiilililllilll]
4.
5.
ruuru[[Fl
should be heard upon connection.
Pairing the Device
1.
2.
3.
il1ililililtillil
SPP Slave Mode (PC as Host)
To connect a wireless device to Window based system for the first time:
Turn on the host computer and activate ¡ts w¡reless connection.
Select 'Add wireless device". Or open the dialog BT devices and click
'Add".
Power on the scanner and program it w¡th 'SPP Slave mode" label.
rr¡fftiltililffitil]llll
7.
Start Scanner SPP Slave enable End
On Devices tab, click Add. This will open the Add wireless Device
Wizard.
Select the "My device ¡s set up and ready to be found" checkbox, and
then cl¡ck Next.
The scanner should be on the list of discoverable devices. The default
name of the scanner is "BR/S-200BT". Select "BR/S-2008T" and click
"Next".
Select "Let me choose my own passkey" and enter the pin code. The
default pin code is "12345678.
Click "Next" to connect the scanner to the host. A short beep should be
heard upon connect¡on.
BT HID/Smart Phone mode
1. Power on the scanner ánd progÉm it with "BT HID Mode" if necessary.
To connect a smart mobile phone (for example, iPhone, Android), the
Smart phone mode must also be enabled.
iNote: Scanner ¡s preprogrammed with BT HID mode as default.
llltilllilffiflilI]illl
BT HID mode
fi]iltililililflililril il1lilililililllilll
Smart phone mode End
Enable wireless connection on your host and set it to discover other
wireless devices in its surround¡ng.
The scanner should be on the list of discoverable devices. The default
name of the scanner is "BR/S-200BT". Select "BR/S-2008T" from the list
and you will be prompted to enter a paring pin code.
To input the pin code, use the scanner to scan the ASCII table in
previous sect¡on. For example: ¡f the p¡n code is "0111", scan "0", "!",
"L", "L" from ASCII barcode labels.
Scan the Enter barcode to confirm.
Scan "Confirm Settine" to store the address.
ilflililililffiililll
Confirm Setting (for address and
pin code setting required)
Illil]fliltillil1iltiltilt
Required Pair with slave (SPP Master)
Setup and input the pin code if necessary. Scan "Required Pa¡r with
slave (SPP Master)" to begin pairing.
A short beep

ASCII Table
bematech
Handy Wireless Scanner
'H
ilililIililil¡t ,
ilililtil]lil -
lllllllllllllll,
|1ilillil|llr ,
ililil | ilil |till
Enter
ililililt¡il ,
ilill1il|ilt .
Items contain in the package may vary depending on the model of the scanner
Package Contents
Wireless scanner
with battery
Micro USB
slot
LED
lndicator
Power Button
/Scan Trigger
Off Button
Hand Strap
Hole
il¡lrih
,-,utd':
Batte ry
Com partment
Scan Window
Dongle Quick Guide
ffia
USB Cable Power Adapter Hand Strap
lilllilililil| -
llililililIilI ,
Scanner Outline
Back Cover
Lock
M¡cro USB slot Used for communication and c
LED Indicaror ndicates lhe scann ng stat-s
Press to power on or scan barcodes
Press to turn the device off
Hand Strap Hole Used to attach hand straps
Secures the battery compartrnent
Power Button/Scan Tr
Battery Compartment Batteries are stored here
S.qIUlfq lfrnrts ared beam for barcode readrng *i!.te: Actual product appearance may vary from the images on this page