BEMIS IMUNSEN POD User manual

IMUNSEN POD
AIR PURIFIER MANUAL

2 3
DEAR CUSTOMERS,
Thank you for purchasing the
Bemis Imunsen Pod Air Purifier.
Please read carefully through the user manual
for safe and proper use. This manual also
contains warranty details.
TABLE OF CONTENTS
PRECAUTIONS
Precautions
PRODUCT INTRODUCTION
Product Parts
Product Diagram
USER GUIDE
Assemby Guide
Installation
Product Functions
MAINTENANCE
Managing the Product
SPECIFICATIONS
Product Specs
FAQ
Warranty
4-7
8-9
10-12
13
14-23

4 5
PRECAUTIONS PRECAUTIONS
PRECAUTIONS PRECAUTIONS
MOVING THE PRODUCT
Please switch off the product and unplug the
power cord before moving the product.
INSTALLATION
Keep the product out of direct sunlight,
excessive heat, and water. Do not install the
product on uneven or inclined surfaces. Do
not install the product where there is a lot of
industrial oil, smoke, gas, or metalic dust. Install
the product so the inlet and outlet of the
product are not completely blocked.
IN THE VEHICLE
Do not install the product in locations besides
the vehicle cup holder. Place the product
firmly into the vehicle cup holder. The pod fits
into cupholders with a width of 3 inches and
a height of 2 inches or more. When using the
product, the proper temperature is 0 ~ 104°F.
Proper temperature for storing the product is
14 ~ 158°F. Be careful not to spill liquids such
as water or drinks on the bottom of the cup
holder. Do not place the product in
direct sunlight. The pod is only compatible with
a vehicle voltage of DC 5V.
WHEN USING
Do not let water or foreign objects inside the
product. Do not touch the power cord with wet
hands. Do not unplug the power cord while the
product is running.
1. This appliance is not intended for
use by people with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
2. Children should be supervised to ensure
that they do not play with the appliance.
3. This product should only be used with the
provided power cord.

6 7
PRECAUTIONS
RESTRICTIONS ON USE
Do not use in places with high temperature or
high humidity. Do not disassemble, repair or
remodel the product. Do not place heavy
objects on the product. Turn the product off
if you notice any irregularities such as high
temperatures or strong odors.
CLEANING
Please make sure to switch off the product
before cleaning. Do not spray water on the
product or wipe it with benzene, thinner,
alcohol, acetone, etc. Do not disassemble
or clean the inside of the product.
PRECAUTIONS

8 9
PRODUCT PARTS
PRODUCT INTRODUCTION
Base
Circular Filter
Maple Wood
Panel
Protective
Cover
1 C type Charging Cable
1 USB Car Charger Adapter
PRODUCT DIAGRAM
Air Outlet
LED Light
Air Inlet
Base
Maple
Wood Panel
Power & Wind
Speed Control
Button
Filter
Replacement
Indicator
Wind Speed
in 3 Levels w/
LED Display
PRODUCT INTRODUCTION

10 11
ASSEMBLING GUIDE
1. Remove the
vinyl cover
from the base.
2. Pull off the
protection film
on the Maple
Wood panel.
3. Connect the
USB cable
to the product.
USER GUIDE
INSTALLATION
INDOOR USE
Do not install on bumpy or inclined floors.
IN THE VEHICLE
The product fits into cupholders with
2.9 inches/75 mm diameter and
1.9 inches /50 mm height or more.
USER GUIDE

1312
PRODUCT FUNCTIONS
USER GUIDE
POWER
Power On / Power Off
Press the button for more than 1.5
seconds to turn it ON / OFF.
WIND SPEED (3 LEVELS)
Use to adjust the fan speed.
Low > Medium > High level in order.
FILTER REPLACEMENT INDICATOR
Automatic Filter Replacement Indicator.
LED indicator will blink for 5 seconds to
let you know to replace the filter when the
device is turned on.
After replacing the filter, push the power
button for 3 seconds and the LED light will
stop blinking.
LOW
MEDIUM
HIGH
MANAGING PRODUCT
MAINTENANCE
EXTERIOR CLEANING
1. Use a vaccum cleaner
to remove the dust
from the air inlet
and outlet.
2. Use a soft cloth
to gently wipe
the exterior.
FILTER CLEANING
1. Remove the pre-filter
from the product.
2. Use a vacuum cleaner
to remove large dust
from the prefilter.
Do not wash
with water.
Remove the circular
filter by holding the
base and the rest of the
product and turning it. It is
recommended to replace
the filter each year.

14 15
PRODUCT SPECS.
SPECIFICATIONS
Bemis Imunsen Pod
2.6 in x 2.6 in x 6.7 in
68mm x 68mm x 172mm
About 0.6lb / 300g
(including the filter)
DC 5V
2.5W
C type Charging Cable,
USB Car Charger Adapter
White / Black
About 1 year
FCC
South Korea
MODEL NAME
SIZE
WEIGHT
VOLTAGE
POWER
CABLE
COLOR
HEPA FILTER
CERTFICATION
COUNTRY OF ORIGIN
FAQ
SYMPTOMS • The power does
not turn on.
THINGS TO
CHECK
• Is the USB plug
connected properly?
• Is the LED
indicator at the
front turned on?
POSSIBLE
SOLUTIONS
• Properly connect
the product with
USB plug.
• Please press the
power button
to operate.
SPECIFICATIONS

16 17
SPECIFICATIONS
SYMPTOMS • Filter replacement
indicator is still
blinking after
replacing the filter
THINGS TO
CHECK
• Did you push the
power button for
more than 5 seconds
after replacing
the filter?
• Is the filter
properly assembled?
POSSIBLE
SOLUTIONS
• Push the power
button for more than
5 seconds.Properly
assemble the filter.
FAQ FAQ
SPECIFICATIONS
SYMPTOMS • The shape of the
Maple wood panel
has changed.
THINGS TO
CHECK
• Maple wood
panel is sensitive
to temperature and
humidity (water).

18 19
SYMPTOMS • The wind is not
coming out. The wind
power is weak.
The wind speed
doesn’t change.
THINGS TO
CHECK
• Is the filter
properly assembled?
• Is the filter
contaminated?
(This may affect
the airflow).
POSSIBLE
SOLUTIONS
• Please check if
the filter is
properly assembled.
• Please clean
the filter.
FAQ
SPECIFICATIONS
FAQ
SPECIFICATIONS
SYMPTOMS • Air outlet has
a strange odor.
THINGS TO
CHECK
• Was the product
used in areas
with smoke?
• Was the product
brought from a
different location?
POSSIBLE
SOLUTIONS
• Filter has
the tendency to
absorb odor, thus
temporarily could
emit odor. This will
eventually fade away.
• The product may
still emit odors from
the previously
used locations.

20
SYMPTOMS • Filter does not
have the maple
scent anymore.
THINGS TO
CHECK
• The filter may lose
its scent, but the
effect of maple
wood remains.
FAQ
SPECIFICATIONS

22 23
WARRANTY WARRANTY
1. Please contact Bemis support with any
warranty inquiries.
2. Even during the warranty period, repairs
will be charged if:
- If the warranty contains false
information or has any changes made.
- If the damages or losses were
caused by user negligence or misuse.
- Failure or damage due to fire,
natural disasters, pollution, salt
damage, gas damage,
abnormal voltage
- Failure or damage due to fixing,
installation, etc.
3. Please note that shipping and service
fees may be incurred even during the
warranty period
4. Please note that all parts removed for
repair will be taken by our team.
5. This warranty cannot be re-issued.
888.722.6488
[email protected]om
BemisAir.com
SPECIFICATIONS SPECIFICATIONS
WARRANTY NON-WARRANTY
One year
from the
date of the
purchase
1. Unauthorized repair,
misuse, collision,
negligence, accidental
Liquid damage,
modification,
disassembly,Using
third party
components, or
destroying them, or
changing labels and
anti-counterfeiting
markings.
2. If the mentioned
warranty has already
been expired.
3. Unforeseeable
damage caused by
natural disaster or
any events out of the
company’s control.

Bemis Manufacturing Co.
300 Mill Street
Sheboygan Falls, WI 53085
888.722.6488
[email protected]
BemisAir.com