BEMIS IMUNSEN TOWER User manual

IMUNSEN TOWER
AIR PURIFIER MANUAL

3
DEAR CUSTOMERS,
Thank you for purchasing the Bemis Imunsen Tower Air Purifier.
Please read carefully through the user manual for safe and proper use.
This manual also contains warranty details.
CAUTIONS
Cautions
PRODUCT INTRODUCTION
Product Parts
Product Diagram
USER GUIDE
Connecting the Purifier
Diffuser Oil Capsule (Optional)
Placing the Purifier
Functionality
MAINTENANCE
Cleaning Filter & Filter Storage
Cleaning Dust Sensor
How to use the APP (Android & IOS) (SMART TOWER ONLY)
SPECIFICATIONS
Product Functions
FAQ
Warranty
TABLE OF CONTENTS
4
6-7
8-15
16-23
24-29

4 5
CAUTIONS
CAUTIONS
TRANSPORTATION
POWER CORD
IN USAGE
INSTALLATION
REGULATIONS
When transporting the product, please make sure
the device is turned off and unplugged.
Insert the filter cover properly before usage. Make sure
the air purifier is at least 4 inches away from the wall.
Do not use the purifier in humid locations.
Severe pressure or bending the power cord could cause
damage. Do not use inadequate or non-certified power adaptors.
Do not temporaily replace the power cord with inadequate or
non-certified power adaptors. Do not pull the power cord with
force when unplugging. User must hold the head of the power
cord when connecting. When transporting or cleaning the
device, please make sure to turn the power off and unplug
the product beforehand.
Immediately stop the purifier if it behaves oddly.
Do not cover the air inlet area.

6 7
PRODUCT DIAGRAM
PRODUCT INTRODUCTION
FRONT BACK
Humitidy Sensor
PM 2.5 Dust Sensor
Filter Storage Cover
Power Port
Additional
Air Inlet
Air Inlet
(3 Sides)
Air Quality
LED Display
Base
PRODUCT PARTS
PRODUCT INTRODUCTION
Device Body
Maple Wood Panel
HEPA 13 Filter Power Cord
Protective Cover
Diffuser
(Optional Detaching Hook)

8 9
CONNECTING THE PURIFIER
USER GUIDE
1. Open the filter cover situated at the
back of the product.
2. Press down and pull the filter out.
3. Remove filter packaging.
4. Place the filter back into the product.
CONNECTING THE PURIFIER
Do not touch with wet hands
USER GUIDE
5. Unpack the maple wood panel.
6. Connect the power cable to the plug situated
at the back of the purifier.

10 11
DIFFUSER OIL CAPSULE (OPTIONAL)
USER GUIDE
1. Use the hook accessory to remove the maple wood panel.
2. Remove the safety net with a screwdriver.
3. Remove the capsule cover from the blower fan case, then peel off the top foil.
Do not poke the clear protective film that contains the essential oil.
4. Reassemble the maple wood panel. The purifier is ready to be used.
The purifier does not operate when the filter cover is open, so please
properly attach the filter before turning on the device.
Remove capsule cover Remove top foil Reassemble capsule cover
USER GUIDE
PLACING THE PURIFIER
MINIMUM 8 INCHES (20 CM)
MINIMUM 4 INCHES (10 CM)
MINIMUM 8 INCHES (20 CM)
Maintain the above indicated distances from other objects/walls when using the purifier.
To use the purifier to its full potential, please make sure it is placed at over 4 inches away
from the wall. Place the provided transparent cover on top when not using.
Available oil scents come in lavender and eucalyptus.

12 13
USER GUIDE
FUNCTIONALITY FUNCTIONALITY
AIR QUALITY DISPLAY IN NUMBERS & COLORS
0~30
Good (Green)
PM 2.5
Air Quality Display
31~80
Average (Blue)
81~150
Bad (Orange)
ADDITIONAL
INDICATOR
FILTER
REMINDER
When you turn on the power, the time before filter
replacement is shown on the screen.
Check whether the filter storage cover is properly placed.
CAUTION: After replacing the filter, turn off the power and push
the Auto button and Cyclone button at the same time
to reset the filter replacement time.
PRE-FILTER
H13 TRUE HEPA FILTER
DEODORIZATION FILTER
MAPLE WOOD PANEL
Removes larger obstacles such as hair, pollen, pet fur and dander.
H13 True HEPA Filter removes 99.97% of fine dust.
Eliminates VOC caused by daily movement, harmful gases, and pet odors.
Natural odor neutralization and aromatherapy.

1514
USER GUIDE USER GUIDE
FUNCTIONALITY
SMART FUNCTIONS
Ambient
light sensor
Power Auto Wind Level
(3 levels)
Sleep
Mode
Cyclone Optional
Power Saving
Optional
Wifi
POWER
OPTIONAL
POWER SAVE
AMBIENT
LIGHT SENSOR
OPTIONAL WIFI (SMART TOWER ONLY)
AUTO
WIND POWER (3 LEVELS)
SLEEP MODE
CYCLONE
Turns the power on and off. Night mode and
power save mode recommended for night usage.
Converts to the power save
mode. The wind speed decreases
to reduce power consumption.
Automatically changes mode
based on the brightness of the
room. Automatically activates
sleep mode when in dark
areas, and returns to auto mode
once the area brightens up.
Operates when manually set. Operates under 3
different modes (low-moderate-strong) set by
the user.
Operated automatically during night time. The fan
speed automatically reduces, making less noise and
using minimum energy. Sleep mode is unavailable
when the lights are turned on.
Product can be controlled and monitored via
mobile app if set up.
Purify the air efficiently with full
power. Most efficient when used
while cleaning, or after cooking.
Automatically transits to auto
mode after 20 minutes of
operating under cyclone mode.
Automatically changes function levels according
to the air quality, using the 2.5pm dust sensor
situated at the back of the purifier.

16 17
MAINTENANCE MAINTENANCE
CIRCULAR FILTER &
CLEANING FILTER STORAGE
If the device has been in usage for 400 hours, it will
automatically alarm to clean the filter storage area.
Please clean the filter storage area when notified to
maintain the product at good condition.
When the air purifier is not in use, place the provided
cover on top of the maple wood panel to prevent dust
from entering.
WARNING: Please do not use water to
clean the circular filter.
*Filter is recommended
to be replaced every year.
CLEANING THE DUST SENSOR
• Cleaning once every 3 months is recommended. If the
sensor lens is not cleaned, it could cause miscalculations.
• Please open the sensor cover, then use a compressor
or wind power to clean the inner part of the device.
•
WARNING: Please do not use warm wind.
Read and save these instructions.

18 19
HOW TO USE THE APP (ANDROID & IOS) (SMART TOWER ONLY)
1. Download the Bemis Air App
Search and download the Bemis
Air App on the Google Play Store
or Apple App Store
Launch the app and tap
“Account Registration”. Create
an account with your email
address. A comfirmation email
will be sent to your email address.
Choose “Ativate Account” in the
confirmation email to finish
account registration.
After registering your account
and logging in, press the Wi-Fi
button on the device.
2. Account Registration 3. Turn on the Wi-Fi
Function from the Device
MAINTENANCE

20 21
HOW TO USE THE APP (ANDROID & IOS) (SMART TOWER ONLY) HOW TO USE THE APP (ANDROID & IOS) (SMART TOWER ONLY)
Press ‘REGISTRATION’
and turn on the Wi-Fi
on your phone.
Choose the color of
your device.
Type the password
for your Wi-Fi.
The password is “Bemis” The password is “Bemis”.
Please connect imuns_xxxxxx.
This will only appear on
IOS. Press ‘Next’.
imuns_xxxxx
4. Device Registration 5. Choose the Device 6. Wi-Fi Password 7a. Connect ‘imuns’ Wi-Fi (IOS) 7b. Connect ‘imuns’ Wi-Fi (Android) 8. Press Next on IOS
MAINTENANCE MAINTENANCE

22 23
HOW TO USE THE APP (ANDROID & IOS) (SMART TOWER ONLY) HOW TO USE THE APP (ANDROID & IOS) (SMART TOWER ONLY)
Filter Usage Device Information Filter Information
Press the ‘FILTER’ to check
the information about your
filter usage.
(If you want to connect
the device to a different
phone, you need to
delete the device first
and connect.)
When press the icon
to check the information
about the H13 True
HEPA filter and maple
wood filter.
Registering the device is in process.
ANDROID IOS When the device is
successfully connected,
please press ‘START’.
Initialization required when Wi-Fi is not connected.
1. Turn the power off (Keep the plug in the socket).
2. Press Wi-Fi button and Auto button at the same
time and you will hear the beep.
3. Device reset completed.
*(Each device can be connected to only one device at each time.)
9. Registration Process 10. Registration Complete
11. How to Reset the Device
MAINTENANCE MAINTENANCE

24 25
ISSUES CHECK POINTS SOLUTIONS
• The power does
not turn on.
• Is the power plug
properly plugged in?
• Is the indicator light turned on?
• Please give the device a
minute after plugging in
before turning the power on.
• Please connect
the power plug.
• Wind is not
coming out.
• The wind power
has weakened.
• The wind power
does not change.
• Did you remove the vinyl cover
from the filter before using?
• Is the filter properly assembled?
• Is the filter dirty? (Contamination
of the filter can cause decreased
wind power)
• Is the current mode
set to night mode?
• There is a vinyl protective
cover on the filter. Please
remove it before using
the purifier.
• Please check if the filter
is properly assembled and clean
the filter area
• Please change the
operation mode.
• The wind power
automatically
changes.
• Please check if the mode is
under auto mode.
• (In AUTO mode, the wind
power automatically changes
based on the air quality)
SPECIFICATIONS SPECIFICATIONS
PRODUCT FUNCTIONS FAQ
Bemis Imunsen Tower
10.2 x 10.2 x 28.3 Inches, 260x260x720mm
782 sq.ft, 59.5 m²
19lb, 8kg (Filter Included)
100V~, 50/60 Hz, 120V~, 60 Hz,
(220~240)V~, 50/60 Hz
4W - 72W
AC : 5.9 ft, 1.8m
White / Black
Replacement Cycle: About 1 year
ETL & FCC
South Korea
PRODUCT NAME
SIZE
USABLE AREA
WEIGHT
VOLTAGE
POWER
CABLE
COLOR
HEPA FILTER
CERTIFICATION
COUNTRY OF ORIGIN

26 27
ISSUES CHECK POINTS SOLUTIONS
• The wind
power is
too strong.
• Is the device currently set in
cyclone mode?
• (Cyclone mode operates at
full capacity to clear the air
during a short duration.)
• The air
produced
by the purifier
smells.
• Was the product used in areas with
smoke or strong odors?
• Was the product brought
from another place?
• The filter inhales odor. Thus can
emit that odor temporarily, but
will eventually disappear.
• The previous location’s odor
may still remain.
• Filter
replacement
period?
• Hepa filter approx. 1 year, • Please check the start date
of the filter usage.
• The dust
sensor is
not operating
under auto
mode.
• Is the sensor covered by a wall
or an obstacle?
• Did you clean the sensor?
• Please check the placement guide
for proper usage. (Page 11)
• Please check maintenance guide
for proper usage. (Page 19)
ISSUES CHECK POINTS SOLUTIONS
• The maple
filter lost
its scent.
• The filter will properly function
for 2 years regardless of the filter
losing scent.
• Please purchase the maple oil from
our website and gently wipe the
product for scented usage.
• After a period of use, even if
the scent is minimal, the effect
of maple wood remains.
• The filter
shape has
changed.
• The filter is sensitive to humidity (water) • For further details, please
refer to page 23.
FAQ FAQ
SPECIFICATIONS SPECIFICATIONS

28 29
WARRANTY WARRANTY
WARRANTY NON-WARRANTY
2 years from
date of purchase.
1. Unauthorized repairs, misuse, collisions, inadvertent misuse, liquid
inflows, modifications, disassembly, use of third party components,
or destruction, or alternation of labels and device number anti
counterfeiting markings.
2. Conditions after the warranty time is over.
3. Damage caused by misusage.
1. Please contact Bemis support with any warranty inquiries.
2. Even during the warranty period, repairs will be charged if:
- If the warranty does not correctly display purchase date, nor the copy of the invoice.
- Defect caused by customer’s fault.
- Defect caused by natural disasters such as fire, gas, electricity defect and more.
- Defect caused by misplacement or assemble.
- Cost for technician visit.
- Cartridge, filter or accessory defect.
3. Please note that all parts removed for repair will be taken by our team.
4. This warranty will not be reissued.
888.722.6488
[e-mail]
BemisAir.com
SPECIFICATIONS SPECIFICATIONS

Bemis Manufacturing Co.
300 Mill Street
Sheboygan Falls, WI 53085
888.722.6488 | [email protected] | BemisAir.com