Bench Dog Tools Power-Loc 40-028 User manual

82-0019-05 0904
2004 Bench Dog, Inc.
Contents of Box
1 switch assembly
4 1/4-20 jam nuts 
4 1/4" lock washers
2 1/4-20 x 1/2" button head cap screws
2 1/4-20 x 5/8" button head cap screws
1 1/8" hex wrench
Owner's Manual
(formerly PWR400)
Stock No. 40-028
Warning
Important
Tools Required
1/8" hex wrench (supplied)
612.782.8205 main
612.788.2518 fax
800.786.8902 toll free
[email protected]
www.benchdog.com
Bench Dog, Inc.
3310 5th Street NE
Minneapolis, MN 55418
Be sure to check out our web site for all the
latest and greatest accessories and tools.
www.benchdog.com
1-800-786-8902
QUESTIONS?
Read and understand the entire contents
of this manual before using this
accessory! Inspect contents for
shipping damage and shortages. Report
problems directly to Bench Dog, Inc.
This power switch must be in the OFF
position before powering. Always
unplug your machine (power tool) and
turn off all switches before servicing
and adjusting. The one device
connected to the power of this switch
must never exceed 120 VAC, 15 amps.
Power-Loc is an auxiliary safety switch designed for one 15
amp 120 VAC power tool only. Do not use an adapter to add
more devices. In this manual we show two of the most
common mounting styles for Bench Dog brand router
tables.The switch housing has six built-in t-slots for alternative
mounting. If you decide to thru-bolt the switch to your power
tool instead of using the supplied bracket, be sure to size the
thru-bolt's length carefully.
Thank you for choosing Bench Dog!
ACCESSORY
TM