ZIGBEE CP-DS112 User manual

Smart Zigbee Wall Switch(EU)
User Manual
Alexa TUTORIAL Google Home TUTORIAL

Installation Guide
1. Installation
Separate the upper and lower parts from the switch by screwdriver.
See The
Pi cture Blow
Dime nsion :3 .4x3.4x 1.7in
(N oted:Disting uish betwe en each co rres ponding slot )

Attention: There are two types of wiring below, Without neutral wire is required
and neutral wire is required.
2a. Prepare to install wiring
Attention: Without neutral wire is required.
2a.1 Live Wire connects “L” terminal.
2a.2Bulb Wire connects “L1, L2,L3” terminal.
1 gang connects “L1”Terminal.
2 gang connects “L1, L2” terminal.
3 gang connects “L1, L2, L3”terminal .

2b. Prepare to install wiring
Attention: Neutral wire is required.
2b.1 Live Wire connects “L” terminal.
2b.2 Bulb Wire connects “L1, L2,L3” terminal.
2b.3 Neutral Wire connects “N” terminal (Attention: Neutral wire is required).
1 gang connects “L1”Terminal.
2 gang connects “L1, L2” terminal.
3 gang connects “L1, L2, L3”terminal.
NL L1 L2 L 3
wiring Schematic
N
L
Bulb
Neutral wire is required

3. Fix the switch onto wall
3.1 Put the switch lower parts into switch box in the wall
3.2 Mount the two side screws.
3.3 Install the upper top case (install from up above)
3.4 Cover the upper top case into switch.
3.5 Turn on electricity, and then LED light will be flashed quickly for
pairing.
WIFI Indicator Light
ON /OFF
Bu tt on

Indicator Light Status:
1. The red light continuous brightness .
-The switch is connected succeed with mobile phone APP.
2. The red light blinking slowly.
- The switch is not connected to the network.
3. The red light flash continuously and quickly.
- The switch is currently on the status of matching with mobile phone APP.
4. The red light flash 1 time every 3 seconds .
-The switch is into AP pairing Mode.
How to download App?
Scan the QR code below or search Smart Life in IOS APP store or Google play
IOS & Android System

Setting Smart Life APP
How to Register and Login:
1. Download or Scan the QR Code and install Smart Life App.
2. Once Download or Scan the QR Code, the App will ask you to register your
device.
3. Enter your phone number or email which you prefer and select the country
you live in.
4. If phone numbers selected you will receive a text with a registration code, if
you choose email you should create a password then.

5.Create family .
6.Enter the family name and select the room.
7.Family create sucessfully.

How does APP connect with smart gateway device fast?
1 . Open the application, click add device, click “on the wired gateway”, connect
the gateway device to the power supply, and connect to the home router.

2. Please reset gateway device,press the reset button for a long time until the
indicator light (green light) is on continuously .
3. First click “confirm indicator light is on”, Then Click on the smart gateway link
,make sure the cellphone and gateway in the same network,so APP could connect
with the gateway device.
4. Device added successfully,click completed.

Smart gateway and APP connection complete, how to connect to the switch?
1. Make sure the switch is electrified,Press any switch button for 5-8 second until
the Wi-Fi red light flashes rapidly.
2. After the smart Gateway is connected to the APP, click on the added subdevice
first, and then click "The indicator light is flashing."

3. Device connecting automatically,then click device added successfully, Rename
the device and select the room then tap Completed
(Attention: The name should use numeric and letters, don’t use special symbols)
4. Long press switch to edit switch name, (Attention: The name should use
numeric and letters, don’t use special symbols)