Motorola RFS7000 Series User manual

M
Motorola RFS Series Wireless LAN Switches
WiNG CLI Reference Guide

© 2008 Motorola, Inc. All rights reserved.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is
a registered trademark of Symbol Technologies, Inc. All other product or service names are the
property of their respective owners.

About This Guide
Introduction
This guide provides information about using the following Motorola switches and version
numbers:
• WS5100 3.1
• RFS6000 3.1
• RFS7000 1.1
This Motorola RF Switch CLI Reference Guide and contains the following sections:
•Who Should Use this Guide
•How to Use this Guide
•Conventions Used in this Guide
•Motorola Service Information
•Motorola, Inc. End-User License Agreement
Who Should Use this Guide
The Motorola RF Switch CLI Reference Guide is intended for administrators responsible
for implementing, configuring, and maintaining a WS5100, RFS6000 or RFS7000 model
switch using the switch’s command line interface (CLI). It also serves as a reference for
configuring/modifying system settings. The administrator should be familiar with wireless
technologies, networking concepts, Ethernet concepts, IP addressing and SNMP.
To avoid confusion amongst WS5100, RFS6000 and RFS7000 CLI users, generic examples
are used throughout this guide. These examples are relevant to each switch.

Motorola RF Switch CLI Reference Guide
viii
Example
RFSwitch>cluster-cli enable
RFSwitch>
The syntax, parameters and descriptions within this guide can also be used generically for
a WS5100, RFS6000 and RFS7000 model switch. However, some subtle differences do
exist amongst these baselines. These differences are strongly noted within the specific
commands impacted. When these differences are noted, the options available to each
switch baseline are described in detail.
How to Use this Guide
This guide will help you implement, configure, and administer the switch and associated
network elements. This guide is organized into the following sections:
Chapter Jump to this section if you want to...
Chapter 1, “Introduction” Review the overall feature-set of the switch, as well as
the many configuration options available.
Chapter 2, “Common
Commands”
Understand the commands common amongst many
contexts and instance contexts within the switch CLI.
Chapter 3, “User Exec
Commands”
Summarize the User Exec commands within the
switch CLI.
Chapter 4, “Privileged Exec
Commands”
Review the Priv Exec commands within the switch CLI.
Chapter 5, “Global
Configuration Commands”
Understand the Global Config commands within the
switch CLI.
Chapter 6, “Crypto-isakmp
Instance”
Review the crypto-isakmp commands within the
switch CLI.
Chapter 7, “Crypto-group
Instance”
Understand the crypto-group commands within the
switch CLI.

ix
Chapter 8, “Crypto-peer
Instance”
Summarize the crypto-peer commands within the
switch CLI.
Chapter 9, “Crypto-ipsec
Instance”
Review the crypto-ipsec commands within the
switch CLI.
Chapter 10, “Crypto-map
Instance”
Understand the crypto-map commands within the
switch CLI.
Chapter 11, “Crypto-
trustpoint Instance”
Summarize the crypto trustpoint commands within
the switch CLI.
Chapter 12, “Interface
Instance”
Understand the config-if commands within the
switch CLI.
Chapter 13, “Spanning tree-
mst Instance”
Summarize the (config-mst) instance commands
within the switch CLI.
Chapter 14, “Extended ACL
Instance”
Review the config-ext-nacl commands within the
switch CLI.
Chapter 15, “Standard ACL
Instance”
Understand the config-std-nacl commands within
the switch CLI.
Chapter 16, “Extended MAC
ACL Instance”
Review the config-ext-macl commands within the
switch command line.
Chapter 17, “DHCP Server
Instance”
Understand the (config-dhcp pool) commands
within the switch command line.
Chapter 18, “DHCP Class
Instance”
Review the (config-dhcp-class) instance
commands within the switch CLI.
Chapter 19, “Radius Server
Instance”
Summarize the (config-radsrv) instance commands
within the switch CLI.
Chapter 20, “Wireless
Instance”
Understand the (config-wireless) instance
commands within the switch CLI.
Chapter 21, “SOLE Instance” Review the (config-sole) instance commands within
the switch CLI.
Chapter Jump to this section if you want to...

Motorola RF Switch CLI Reference Guide
x
Chapter 22, “ARPI Instance” Review the (config-arpi) instance commands within
the switch CLI
Chapter 23, “ESPI Instance” Review the (config-espi) instance commands within
the switch CLI
Chapter Jump to this section if you want to...

xi
Conventions Used in this Guide
This section describes the following topics:
•Annotated Symbols
•Notational Conventions
Annotated Symbols
The following document conventions are used in this document:
NOTE: Indicates tips or special requirements.
CAUTION: Indicates conditions that can cause equipment damage or
data loss.
SWITCH NOTE: Indicates caveats unique to a WS5100,
RFS6000 or RFS7000 model switch.
WARNING! Indicates a condition or procedure that
could result in personal injury or equipment damage.
!

Motorola RF Switch CLI Reference Guide
xii
Notational Conventions
The following notational conventions are used in this document:
• Italics are used to highlight specific items in the general text, and to identify chapters
and sections in this and related documents.
• Bullets (•) indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential
• Sequential lists (those describing step-by-step procedures) appear as numbered lists.
Convention Example Token Description Valid Inputs
bold Bold text indicates commands
and keywords that you enter
literally
italics Italic text indicates arguments
for which you supply values.
() (on|off) Grouping (exactly one of a list of
tokens)
on
{} {key1|key2|key
3}
Selective recursive (multiple
tokens allowed, but each can
only be used once)
key1 key3
[ ]
[key1|key2|key
3]
Infinite recursive (multiple
tokens allowed, each can be
used multiple times)
key1 key1 key2 key3
key2 key3
. .<1-10> Simple infinite recursive 1 2 6
? [key1|?key2] Selective keyword in infinite
recursive (multiple tokens, but
you can pick one that’s only
allowed once)
key1 key1 key2

xiii
Motorola Service Information
Use the Motorola Support Center as the primary contact for any technical problem,
question, or support issue involving Motorola products. Motorola Support Center responds
to calls by email, telephone or fax within the time limits set forth in individual contractual
agreements:
Telephone (North America): 1-800-653-5350
Telephone (International): [phone]
Fax: [phone]
Email: [email protected]
When contacting Motorola Support Center, please provide the following information:
• Serial number of the unit.
• Model number or product name.
• Software type and version number.
Customer Support Website
Comprehensive on-line support is available at http://www.symbol.com/support/ .
Registration is free and a variety of services can be linked through this Web portal.
Product Sales and Product Information
Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742-1300
Tel: [phone] or 1-800-722-6234
Fax: [phone]

Motorola RF Switch CLI Reference Guide
xiv
General Information
For general information, contact Motorola at:
Telephone (North America): 1-800-722-6234
Telephone (International): [phone]
Website: http://www.motorola.com