BENDIXKing KGX 150 User guide

9201-B San Mateo Blvd N.E.
Albuquerque, New Mexico 87113 U.S.A.
CAGE: 6PC31
Telephone: [phone] (Toll Free U.S.A./Canada)
Telephone: [phone] (International Direct)
Website: www.BendixKing.com/support
System Installation Manual
KGX 150/130 Transceivers and Receivers
Part Number CAGE
89000016-130 6PC31
89000016-131 6PC31
89000016-150 6PC31
89000016-151 6PC31
Legal Notice
Export Control
This document contains technical data and is subject to U.S. export regulations. These commodities, technology, or
software were exported from the United States in accordance with the export administration regulations. Diversion contrary
to U.S. law is prohibited.
ECCN: 7E994.
Page T-1
Publication Number D201405000059, Revision 1 Initial 19 Jan 2015
Revised22Dec2016
©Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Proprietary Information Honeywell - Confidential
THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE PROPERTY OF HONEYWELL
INTERNATIONAL INC., CONTAIN TRADE SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED,
DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT PRIOR WRITTEN PERMISSION OF
HONEYWELL INTERNATIONAL INC. ALL RIGHTS RESERVED.
Honeywell Materials License Agreement
The documents and information contained herein ("the Materials") are the proprietary data of Honeywell
International Inc. These Materials are provided for the exclusive use of Honeywell Service Centers;
Honeywell-authorized repair facilities; operators of Honeywell aerospace products subject to an applicable
product support agreement, their wholly owned-subsidiaries or a formally designated third party service
provider; and direct recipients of Materials from Honeywell’s Aerospace Technical Publication Distribution.
The terms and conditions of this License Agreement govern your use of these Materials, except to the
extent that any terms and conditions of another applicable agreement with Honeywell regarding the
operation, maintenance, or repair of Honeywell aerospace products conflict with the terms and conditions
of this License Agreement, in which case the terms and conditions of the other agreement will govern.
However, this License Agreement will govern in the event of a conflict between its terms and conditions
and those of a purchase order or acknowledgement.
1. License Grant - If you are a party to an applicable product support agreement, a Honeywell Service
Center agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited,
non-exclusive license to use these Materials to operate, maintain, or repair Honeywell aerospace products
only in accordance with that agreement.
If you are a direct recipient of these Materials from Honeywell’s Aerospace Technical Publication
Distribution and are not a party to an agreement related to the operation, maintenance or repair of
Honeywell aerospace products, Honeywell hereby grants you a limited, non-exclusive license to use
these Materials to maintain or repair the subject Honeywell aerospace products only at the facility to
which these Materials have been shipped ("the Licensed Facility"). Transfer of the Materials to another
facility owned by you is permitted only if the original Licensed Facility retains no copies of the Materials
and you provide prior written notice to Honeywell.
2. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are not
expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets. No
license to use any Honeywell trademarks or patents is granted under this License Agreement.
3. Confidentiality - You acknowledge that these Materials contain information that is confidential and
proprietary to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of these
Materials.
4. Assignment And Transfer - This License Agreement may be assigned to a formally designated service
designee or transferred to a subsequent owner or operator of an aircraft containing the subject Honeywell
aerospace products. However, the recipient of any such assignment or transfer must assume all of
your obligations under this License Agreement. No assignment or transfer shall relieve any party of
any obligation that such party then has hereunder.
5. Copies of Materials - Unless you have the express written permission of Honeywell, you may not
make or permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies
of only portions of the Material for your internal use. You agree to return the Materials and any copies
thereof to Honeywell upon the request of Honeywell.
6. Term - This License Agreement is effective until terminated as set forth herein. This License Agreement
will terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this
Page T-2
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
License Agreement or will terminate simultaneously with the termination or expiration of your applicable
product support agreement, authorized repair facility agreement, or your formal designation as a third party
service provider. Upon termination of this License Agreement, you will return these Materials to Honeywell
without retaining any copies and will have one of your authorized officers certify that all Materials have
been returned with no copies retained.
7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from
a breach of this License Agreement.
8. Limitation of Liability - Honeywell does not make any representation regarding the use or sufficiency of
the Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS,
IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISING FROM
COURSE OF PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY
DISCLAIMED, OR (ii) WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY
RIGHTS OF THIRD PARTIES, EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH
INFRINGEMENT. IN NO EVENT WILL HONEYWELL BE LIABLE FOR ANY INCIDENTAL DAMAGES,
CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS
OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS WILL
APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY,
TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE.
9. Controlling Law - This License shall be governed and construed in accordance with the laws of the
State of New York without regard to the conflicts of laws provisions thereof. This license sets forth the
entire agreement between you and Honeywell and may only be modified by a writing duly executed by
the duly authorized representatives of the parties.
Safety Advisory
WARNING: BEFORE THE MATERIALS CALLED OUT IN THIS PUBLICATION ARE USED, KNOW THE
HANDLING, STORAGE AND DISPOSAL PRECAUTIONS RECOMMENDED BY THE MANUFACTURER
OR SUPPLIER. FAILURE TO OBEY THE MANUFACTURERS’ OR SUPPLIERS’ RECOMMENDATIONS
CAN RESULT IN PERSONAL INJURY OR DISEASE.
This publication describes physical and chemical processes which can make it necessary to use chemicals,
solvents, paints, and other commercially available materials. The user of this publication must get the
Material Safety Data Sheets (OSHA Form 174 or equivalent) from the manufacturers or suppliers of the
materials to be used. The user must know the manufacturer/ supplier data and obey the procedures,
recommendations, warnings and cautions set forth for the safe use, handling, storage, and disposal
of the materials.
Warranty/Liability Advisory
WARNING: HONEYWELL ASSUMES NO RESPONSIBILITY FOR ANY HONEYWELL EQUIPMENT
WHICH IS NOT MAINTAINED AND/OR REPAIRED IN ACCORDANCE WITH HONEYWELL’S
PUBLISHED INSTRUCTIONS AND/OR HONEYWELL’S FAA/SFAR 36 REPAIR AUTHORIZATION.
NEITHER DOES HONEYWELL ASSUME RESPONSIBILITY FOR SPECIAL TOOLS AND TEST
EQUIPMENT FABRICATED BY COMPANIES OTHER THAN HONEYWELL.
WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR
DECREASE THE LIFE OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING
OR TEST EQUIPMENT CAN RESULT IN DAMAGE TO THE PRODUCT COMPONENTS OR GIVE
UNSATISFACTORY RESULTS.
Page T-3
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Copyright - Notice
Copyright 2015, 2016 Honeywell International Inc. All rights reserved.
Honeywell is a registered trademark of Honeywell International Inc.
All other marks are owned by their respective companies.
THIS IS THE CMM FOSI - DATE: 20101217
Page T-4
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
TRANSMITTAL INFORMATION
REVISION NUMBER 1 DATED 22 DEC 2016
TO HOLDERS OF KGX 150/130 TRANSCEIVERS AND RECEIVERS SIM PUB. NO. D201405000059
ISSUED FOR USE IN SUPPORT OF THE FOLLOWING:
Table TI-1 shows the applicable components.
Table TI-1. Applicable Components
Component PN Nomenclature
89000016-130 KGX 130T ADS-B Transceiver without Internal GPS
89000016-131 KGX 130R ADS-B Receiver without Internal GPS
89000016-150 KGX 150R ADS-B Receiver with Internal WAAS GPS
89000016-151 KGX 150T ADS-B Transceiver with Internal WAAS GPS
Revision History
Table TI-2 shows the revision history of this SIM.
Table TI-2. Revision History
Revision Number Revision Date
019 Jan 2015
122 Dec 2016
This revision is a full replacement. All pages have a new date, as identified in the List of Effective Pages.
Revision bars identify the changed data. See Transmittal information for history of revisions to this SIM.
Remove and discard all pages of the manual and replace them with the attached pages. Write the revision
number, revision date, and replacement date on the Record of Revisions page.
The table of highlights tells users what has changed as a result of the revision. The table consists of three
columns.
The Task/Page column identifies the blocks of changed information, such as a task, subtask, graphic, or parts
list, and the page on which that block starts. The block of information often includes the MTOSS code. Revision
marks, when provided, identify the location of the change within the block.
The Description of Change column tells about the change or changes within each block. The description of
change is often preceded by a paragraph or figure reference that applies to the block of information.
The Effectivity column tells the user the part number(s) to which the block of information applies. The default
value for this column is "All." "All" means that the block applies to all parts.
Table of Highlights
Task/Page Description of Change Effectivity
SERVICE BULLETIN LIST Added SB 89000016-34-0001 (D201603000071) in
the service bulletin list. All
EFFECTIVITY
ALL Page TI-1
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Table of Highlights (Cont)
Task/Page Description of Change Effectivity
INTRODUCTION Updated the content and format of the Introduction section
to agree with Honeywell processes in effect at the time of
the release of this revision. Rev bars not used.
All
Page INTRO-10 Paragraph 4.B. Added Service Information Documents. All
Page INTRO-10 Paragraph 4.B. Added SIL D201608000055 to Table
INTRO-2. All
Page 1 Paragraph 1.A. Added WITHOUT INTERNAL GPS to the
KTG 130 series components in Table 1. All
Page 1 Paragraph 2.A. Added TSO/MOPS data in Step (1).
Updated the text in Steps (3) and (4). All
Page 2 Figure 1. Updated graphics to include the latest data. All
Page 2 Figure 2. Updated graphics to include the latest data. All
Page 4 Paragraph 2.B. Updated the text in Step (2). All
Page 5 Paragraph 2.C. Changed TSO-C88a to TSO-C88b and
added ETSO-C88a in Step (1). All
Page 5 Paragraph 2.C. Added a note in Step (4). Updated the
nomenclature in Step (5). All
Page 7 Paragraph 2.E. Updated the text in Step (2). All
Page 7 Paragraph 3.A. Updated the TSO specification in Table 2.
Updated the discrete and GPS descriptions in Table 3.
Updated the width and depth in Table 4.
All
Page 1001 Paragraph 1.A. Added a new last sentence in Step (3). All
Page 1001 Paragraph 3.A. Updated KGX descriptions in Table 1001. All
Page 1004 Paragraph 4.A. Added new Garmin and BendixKing part
numbers and changed the model number for the Garmin
manufacturer in Table 1007.
All
Page 1004 Paragraph 5. Added FT-9000 RAMP Tester data. All
Page 1009 Paragraph 9.A. Updated Table 1010 and added Table
1010 footnote. All
EFFECTIVITY
ALL Page TI-2
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Table of Highlights (Cont)
Task/Page Description of Change Effectivity
Page 1011 Paragraph 10.B. Changed I/O for J1-43 from I to O in
Table 1012. All
Page 1013 Paragraph 10.E. Added RS-232 and note to serial Port 6
data in Step (2) and in Table 1015. All
Page 1015 Paragraph 10.F. Updated the text and added a note in
Step (1). Added anonymous mode data in Table 1017.
Updated the text in Step (2). Added Step (4).
All
Page 1015 Paragraph 10.F. Step (2)(b) was deleted by this revision.
No revision bar. All
Page 1017 Paragraph 10.I. Updated Step (1) and Table 1019. All
Page 1017 Paragraph 10.J. Updated Steps (1) and (2). Added Steps
(4) thru (6). The subsequent steps are renumbered.
Added Figure 1005. Changed the title of Table 1020 from
RS-232 Connections to MPI Pinout. Updated the text in
Steps (8) and (9) and the note associated with Step (9).
All
Page 1019 Paragraph 12.D. Added a reference to the Serial Interface
Specifications section in Step (1). All
Page 1021 Paragraph 14.A. Updated Step (1). All
Page 1022 Paragraph 14.B. Updated Step (2). All
Page 1022 Paragraph 14.C. Changed 2.5 to 5.5 in Step (2). All
Page 1024 Paragraph 15.D. Changed SBAS to WAAS in Step (1).
Changed Section 4B to Section 14-1 in Step (2). All
Page 1025 Paragraph 17.A. Text from E.(1) was added as new
Step (1). No revision bar. All
Page 1025 Paragraph 17.A. Added a note to Step (3). All
Page 1025 Paragraph 17.B. Updated the text in Step (1). All
Page 1025 Paragraph 17.C. Updated the text in Step (1). All
Page 1026 Paragraph 17.D. Updated the text in Step (1). All
Page 1026 Paragraph 17.F. Added a non-TSO functions statement. All
EFFECTIVITY
ALL Page TI-3
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Table of Highlights (Cont)
Task/Page Description of Change Effectivity
Page 2001 Paragraph 1. Replaced Paragraphs 1 thru 10 with new
Paragraphs 1 thru 6. The subsequent paragraphs are
renumbered. Replaced Figures 2001 thru 2008. Added
Figures 2009 thru 2012 and applicable text and tables.
All
Page 3001 Paragraph 1.A. Added Step (2) and Pub. No.
D201405000060. All
Page 3001 Paragraph 1.C. Added a description of the control panel
buttons and knobs and a reference to the applicable
pilot’s guide in Step (1). Added new Figure 3002 thru
Figure 3004 and applicable text data in Step (2). Deleted
old Steps (3) thru (6) and Tables 3001 thru 3003. The
subsequent steps, tables, and figures are renumbered.
Updated Step (3).
All
Page 3003 Figure 3002. Added KGX Control Panel Wave Symbols
graphic. All
Page 3003 Figure 3003. Added Display in ALT mode graphic. All
Page 3003 Figure 3004. Added Reverse Video Examples when KGX
Control Panel is in External Control Mode. All
Page 3004 Paragraph 2.A. Updated Step (4). Deleted Steps (5) and
(6). The subsequent steps are renumbered. All
Page 3004 Paragraph 3.A. Added the word typical to the text in
Step (1). All
Page 3005 Paragraph 3.B. Updated the serial Port 6 configuration in
Table 3001. Updated the default in Table 3002. Added
display data output and Footnote 3 in Table 3003.
All
Page 3007 Paragraph 3.C. Updated Step (1). Updated Table 3004
thru Table 3007, Table 3009, Table 3011, and Table 3017.
Added Table 3012 and Table 3020. The subsequent
tables are renumbered.
All
Page 3007 Paragraph 3.C. Added label 270 to Table 3019. All
Page 3017 Paragraph 4.A. Updated Step (5). All
Page 3020 Figure 3006. Added Tera Term Terminal Strip graphic. All
Page 3020 Figure 3007. Added Tera Term Serial Port Setup graphic. All
EFFECTIVITY
ALL Page TI-4
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Table of Highlights (Cont)
Task/Page Description of Change Effectivity
Page 3021 Figure 3008. Added Tera Term WiFi Connection Settings
Initial MPI Connection graphic. All
Page 3021 Figure 3009. Updated graphic to include the latest data. All
Page 3022 Paragraph 4.C. Changed the paragraph title to Terminal
Maintenance Commands. Updated Table 3023. Deleted
old Paragraph (7) and Figure 3012. Deleted old Paragraph
(15) and Figure 3020. The subsequent paragraphs and
figures are renumbered. Updated Step (9), Step (10).
All
Page 3022 Paragraph 4.C. Globally changed “rx status” to “rxstatus”
in the text. A revision bar is not used to show this change. All
Page 3023 Figure 3011. Updated graphic to include the latest data. All
Page 3023 Figure 3012. Updated graphic to include the latest data. All
Page 3024 Figure 3013. Updated graphic to include the latest data. All
Page 3024 Figure 3014. Updated graphic to include the latest data. All
Page 3025 Figure 3016. Updated graphic to include the latest data. All
Page 3026 Figure 3017. Updated graphic to include the latest data. All
Page 3027 Figure 3019. Updated graphic to include the latest data. All
Page 3028 Figure 3020. Updated graphic to include the latest data. All
Page3029 Figure 3021. Updated graphic to include the latest data. All
Page 3029 Paragraph 4.D. Added a note in Step (3). All
Page 3030 Figure 3023. Updated graphic to include the latest data. All
Page 3031 Sheet 1 of Figure 3024. Updated graphic to include the
latest data. All
Page 3032 Figure 3025. Updated graphic to include the latest data. All
Page 3032 Figure 3026. Updated graphic to include the latest data. All
Page 3034 Figure 3031. Updated graphic to include the latest data. All
Page 3035 Figure 3032. Updated graphic to include the latest data. All
EFFECTIVITY
ALL Page TI-5
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Table of Highlights (Cont)
Task/Page Description of Change Effectivity
Page 3035 Figure 3034. Updated graphic to include the latest data. All
Page 3036 Figure 3035. Updated graphic to include the latest data. All
Page 3036 Figure 3036. Updated graphic to include the latest data. All
Page 3037 Figure 3037. Updated graphic to include the latest data. All
Page 3038 Paragraph 4.F. Updated Step (4) to add compatibility
with the ADS-B system. All
Page 3038 Figure 3040. Updated graphic to include the latest data. All
Page 3039Figure 3043. Added “set displayout” Command graphic. All
Page 3040 Paragraph 4.G. Added Subtask G, Tabie 3024. The
subsequent tables and figures are renumbered. All
Page 3040 Figure 3044. Added “setpw” Command. All
Page 3041 Figure 3045. Added “checkpw” Command. All
Page 3041 Figure 3046. Added “resetpw” Command All
Page 3041 Figure 3047. Added “maint ascii pw” Command. All
Page 3041 Paragraph 5.A. Updated Step (1) and the note in Step (1). All
Page 3042 Paragraph 5.B. Updated Step (1)(a). All
Page 3042 Paragraph 5.C. Changed four serial channels to five
serial channels in Step (7). All
Page 3042 Paragraph5.C.UpdatedStep(8)(a). All
Page 3042 Paragraph 5.C. Updated Step (10)(a). All
Page 3042 Paragraph 5.C. Added Other 2 in Step (12)(a). Added
GPS in Step (14). Added a note in Step (17)(b). Updated
the text in Step (18)(d). Updated the text in Step (22).
Added notes in Step (25)(a) and (c).
All
Page 3056 Paragraph 6.B. Updated the section reference in Step
(1)(a).RemovedthethirdsentenceinStep(3)(c).
Updated Step (4)(b).
All
Page 4001 Paragraph 2.B. Added KGX in Table 4002. All
EFFECTIVITY
ALL Page TI-6
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Table of Highlights (Cont)
Task/Page Description of Change Effectivity
Page 4002 Paragraph 3.A. Added WARNING display data in Step (1).
Updated Table 4003 and Table 4004. All
Page 5002 Paragraph 2.A. Table 5002: Changed altitude from 50,000
feet (15, 240 m) to 35,000 feet (10,668 m). Changed
the low operating temperature from -40 F(-40C) to
-4 F(-20C).
All
Page 6001 Paragraph 3. Added the word Sensor to the task title. All
Page 6001 Paragraph 3.A. Added (default minimum) to the first
bulletinStep(1). All
Page 7001 Paragraph 1.A. Changed No. 33 comments for item 33
from Installation configuration to from GPS data. All
Page 8001 Paragraph 1.C. Replaced Table 8001 with updated
Step (1)(a). All
Page 8001 Figure 8001. Updated graphic to include the latest data. All
Page 8002 Paragraph 1.E. Added crimp pin to Table 8005. All
Page 8009 Figure 8007. Updated graphic to include the latest data. All
EFFECTIVITY
ALL Page TI-7
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Blank Page
EFFECTIVITY
ALL Page TI-8
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
RECORD OF REVISIONS
For each revision, write the revision number, revision date, date put in the manual, and your initials in the
applicable column.
NOTE: Refer to the Revision History in the TRANSMITTAL INFORMATION section for revision data.
EFFECTIVITY
ALL Page RR-1
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Blank Page
EFFECTIVITY
ALL Page RR-2
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
RECORD OF TEMPORARY REVISIONS
Instructions on each page of a temporary revision tell you where to put the pages in your manual. Remove
the temporary revision pages only when discard instructions are given. For each temporary revision, put the
applicable data in the record columns on this page.
Definition of Status column: A TR may be active, incorporated, or deleted. “Active” is entered by the holder
of the manual. “Incorporated” means a TR has been incorporated into the manual and includes the revision
number of the manual when the TR was incorporated. “Deleted” means a TR has been replaced by another
TR, a TR number will not be issued, or a TR has been deleted.
Date Date
Temporary Put Removed
Revision Page Issue in from
Number Status Number Date Manual By Manual By
EFFECTIVITY
ALL Page RTR-1
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Blank Page
EFFECTIVITY
ALL Page RTR-2
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
SERVICE BULLETIN LIST
Refer to Table INTRO-2 for other applicable service information documents not listed in the Service Bulletin List.
Service Bulletin / Date Put in
Revision Number Title Modification Manual
89000016-34-0001
(D201603000071) NAVIGATION - KGX 150/130 TRANSCEIVERS AND RECEIVERS AUTOMATIC DEPENDENT
SURVEILLANCE BROADCAST (ADS-B)
UNIVERSAL ACCESS TRANSMITTERS (UAT)
- Software Upgrade Service Bulletin
22 Dec 2016
EFFECTIVITY
ALL Page SBL-1
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
Blank Page
EFFECTIVITY
ALL Page SBL-2
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
LIST OF EFFECTIVE PAGES
Subheading and Page Date Subheading and Page Date
Title
T-1 22 Dec 2016
T-2 22 Dec 2016
T-3 22 Dec 2016
T-4 22 Dec 2016
Transmittal Information
TI-1 22 Dec 2016
TI-2 22 Dec 2016
TI-3 22 Dec 2016
TI-4 22 Dec 2016
TI-5 22 Dec 2016
TI-6 22 Dec 2016
TI-7 22 Dec 2016
TI-8 22 Dec 2016
Record of Revisions
RR-1 22 Dec 2016
RR-2 22 Dec 2016
Record of Temporary Revisions
RTR-1 22 Dec 2016
RTR-2 22 Dec 2016
Service Bulletin List
SBL-1 * 22 Dec 2016
SBL-2 22 Dec 2016
List of Effective Pages
LEP-1 22 Dec 2016
LEP-2 22 Dec 2016
LEP-3 22 Dec 2016
LEP-4 22 Dec 2016
Table of Contents
TC-1 22 Dec 2016
TC-2 22 Dec 2016
TC-3 22 Dec 2016
TC-4 22 Dec 2016
TC-5 22 Dec 2016
TC-6 22 Dec 2016
TC-7 22 Dec 2016
TC-8 22 Dec 2016
TC-9 22 Dec 2016
TC-10 22 Dec 2016
TC-11 22 Dec 2016
TC-12 22 Dec 2016
TC-13 22 Dec 2016
TC-14 22 Dec 2016
Introduction
INTRO-1 22 Dec 2016
INTRO-2 22 Dec 2016
INTRO-3 22 Dec 2016
INTRO-4 22 Dec 2016
INTRO-5 22 Dec 2016
INTRO-6 22 Dec 2016
INTRO-7 22 Dec 2016
INTRO-8 22 Dec 2016
22 Dec 2016
* 22 Dec 2016
INTRO-9
INTRO-10
General Information
1* 22 Dec 2016
2* 22 Dec 2016
3* 22 Dec 2016
4* 22 Dec 2016
5* 22 Dec 2016
6* 22 Dec 2016
7* 22 Dec 2016
8* 22 Dec 2016
22 Dec 2016
22 Dec 2016
9
10
Installation
1001 * 22 Dec 2016
1002 22 Dec 2016
1003 22 Dec 2016
1004 * 22 Dec 2016
1005 * 22 Dec 2016
1006 22 Dec 2016
1007 22 Dec 2016
1008 22 Dec 2016
* indicates pages changed or added data
F indicates a right foldout
LF indicates a left foldout
EFFECTIVITY
ALL Page LEP-1
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.

SYSTEM INSTALLATION MANUAL
89000016
LIST OF EFFECTIVE PAGES (Cont)
Subheading and Page Date Subheading and Page Date
1009 * 22 Dec 2016
1010 *22 Dec 2016
1011 22 Dec 2016
1012 * 22 Dec 2016
1013 * 22 Dec 2016
1014 * 22 Dec 2016
1015 * 22 Dec 2016
1016 * 22 Dec 2016
1017 * 22 Dec 2016
1018 * 22 Dec 2016
1019 * 22 Dec 2016
1020 22 Dec 2016
1021 22 Dec 2016
1022 * 22 Dec 2016
1023 22 Dec 2016
1024 * 22 Dec 2016
* 22 Dec 2016
* 22 Dec 2016
1025
1026
System Interconnect Diagrams
2001 *22 Dec 2016
2002 22 Dec 2016
F 2003/2004 * 22 Dec 2016
F 2005/2006 * 22 Dec 2016
F 2007/2008 * 22 Dec 2016
F 2009/2010 * 22 Dec 2016
F 2011/2012 * 22 Dec 2016
F 2013/2014 * 22 Dec 2016
F 2015/2016 * 22 Dec 2016
F 2017/2018 * 22 Dec 2016
2019 * 22 Dec 2016
2020 *22 Dec 2016
2021 *22 Dec 2016
2022 *22 Dec 2016
2023 22 Dec 2016
2024 22 Dec 2016
Configuration, Calibration, and Checkout
3001 * 22 Dec 2016
3002 * 22 Dec 2016
3003 * 22 Dec 2016
3004 * 22 Dec 2016
3005 * 22 Dec 2016
3006 * 22 Dec 2016
3007 * 22 Dec 2016
3008 * 22 Dec 2016
3009 * 22 Dec 2016
3010 * 22 Dec 2016
3011 * 22 Dec 2016
3012 * 22 Dec 2016
3013 * 22 Dec 2016
3014 * 22 Dec 2016
3015 * 22 Dec 2016
3016 * 22 Dec 2016
3017 * 22 Dec 2016
3018 22 Dec 2016
3019 * 22 Dec 2016
3020 * 22 Dec 2016
3021 * 22 Dec 2016
3022 * 22 Dec 2016
3023 * 22 Dec 2016
3024 * 22 Dec 2016
3025 * 22 Dec 2016
3026 * 22 Dec 2016
3027 * 22 Dec 2016
3028 * 22 Dec 2016
3029 * 22 Dec 2016
3030 * 22 Dec 2016
3031 * 22 Dec 2016
3032 * 22 Dec 2016
3033 22 Dec 2016
3034 * 22 Dec 2016
3035 * 22 Dec 2016
3036 * 22 Dec 2016
3037 * 22 Dec 2016
3038 * 22 Dec 2016
3039 * 22 Dec 2016
3040 * 22 Dec 2016
3041 * 22 Dec 2016
* indicates pages changed or added data
F indicates a right foldout
LF indicates a left foldout
EFFECTIVITY
ALL Page LEP-2
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.