BenQ DC X800 User manual

Welcome
DC X800 Digital Camera
User Manual
X800 UM.book Page 1 Monday, December 3, 2007 10:49 AM

Copyright
Copyright 2007 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular
purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes
from time to time in the contents hereof without obligation of this company to notify any person of such
revision or changes.
Taking care of your camera
• The camera operating temperature is between 0 and 40 degrees Celsius. It is normal for the operating
time to be shortened when the temperature is low.
• Do not use or store your camera in the environments listed below:
• Direct sunlight
• High and dusty places
• Next to an air conditioner, electric heater or other heat sources
• In a closed car that is in direct sunlight
• Unstable locations
• If your camera becomes wet, wipe it with a dry cloth as soon as possible.
• Salt or seawater may cause severe camera damage.
• Do not use solvents, such as alcohol, to clean your camera.
• If the lens is dirty, use a lens brush or soft cloth to clean the lens. Do not touch the lens with your
fingers.
• To prevent electric shock, do not attempt to disassemble or repair your camera by yourself.
• Water may cause a fire or electric shock. Therefore, store your camera in a dry place.
• Do not use your camera outdoors when it is raining or snowing.
• Do not use your camera in or near water.
• If a foreign substance or water gets in your camera, please turn the power off immediately and
disconnect the batteries and the power adapter. Remove the foreign substance or water, and send it to
the maintenance center.
• Transfer the data to the computer as soon as possible to avoid losing your images and/or video clips.
Disposal of Waste Electrical and Electronic Equipment by users in private households in the
European Union.
This symbol on the product or on the packaging indicates that this can not be disposed of as
household waste. You must dispose of your waste equipment by handing it over to the
applicable take-back scheme for the recycling of electrical and electronic equipment. For
more information about recycling of this equipment, please contact your city office, the shop
where you purchased the equipment or your household waste disposal service. The recycling
of materials will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and environment.
CE Regulatory Notice
Hereby, BenQ Corp. declares under our responsibility that the product is in conformity with the
requirements set out in the Council Directive on the Approximation of the Laws of the Member States
relating, Electromagnetic Compatibility Directives (89/336/EEC, 92/31/EEC) and Low Voltage Directive
(73/23/EEC).
X800 UM.book Page 2 Monday, December 3, 2007 10:49 AM

A “Declaration of Conformity” in accordance with the above Directives has been made and is available
from BenQ Corp. upon request.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
X800 UM.book Page 3 Monday, December 3, 2007 10:49 AM

Table of Contents
English
Table of Contents
Touring the camera ................... 1
Checking the package contents ..... 1
Camera components ...................... 1
Front view and bottom view ........... 1
Rear view .......................................... 2
Preparing the camera for use .... 2
Charging the battery ...................... 3
Using multifunctional buttons
(camera mode) ............................... 3
Using multifunctional buttons
(Portable Media Player mode) ...... 4
Using a microSD card .................... 4
Setting language ............................. 5
Setting date and time ..................... 5
Operating the camera (camera
mode) ......................................... 5
Operating the camera (PMP
mode) ......................................... 6
Settings for the PMP mode ........... 7
Capture mode ............................ 8
Scene mode .................................... 9
Flash mode ................................... 11
Focus mode .................................. 12
Drive mode ................................... 12
Image size ..................................... 13
Image quality ................................ 13
AF area .......................................... 13
Face Tracking ............................... 14
Battery status ................................ 14
Setting EV ..................................... 14
AE metering ................................. 15
White balance ............................... 15
ISO sensitivity .............................. 16
Effect ............................................. 16
Date Stamp ................................... 17
Setting sharpness, saturation and
contrast ......................................... 17
Movie Record mode settings ....... 17
Other settings ...........................18
Playback mode (for images and
videos captured by the camera) 19
Options for playback and editing 20
Enlarging an image ........................20
Viewing multiple files at a time .... 20
Protecting ....................................... 20
Deleting files .................................. 20
Rotating an image .......................... 21
Slideshow ....................................... 21
Z-Lighting ...................................... 21
Trimming ....................................... 21
Resizing .......................................... 22
Voice memo ................................... 22
Startup screen ................................ 22
Working with computer and AV
system .......................................22
Bundled software ......................... 22
Connecting the camera to a
computer ...................................... 23
Connecting the camera to an AV
system ........................................... 23
Printing images ............................ 23
Printing with PictBridge ................ 23
Troubleshooting and service
information ..............................24
Technical support ........................ 25
Specifications ...........................26
X800 UM.book Page 1 Monday, December 3, 2007 10:49 AM

Touring the camera 1
English
To ur i n g t he c a me r a
Checking the package contents
Carefully unpack your kit box and ensure that you have the following items.
• Available accessories may vary depending on sales region.
• If any items are missing or damaged, contact your dealer.
• Save the packaging for future shipment or storage.
Camera components
Front view and bottom view
1. User Manual
2. Digital camera
3. USB cable
4. Battery
5. Hand strap
6. Leather case
7. Software CD
8. Battery charger
9. AC power adapter
10. AV cable
11. Earphones
1. Lens
2. Shutter button
3. Speaker
4. Flash
5. Mode switcher: between the
camera mode and the Portable
Media Player (PMP) mode
6. Power button (including status
LED indicator)
7. Microphone
8. Self-timer LED indicator
9. Battery cover
10. Memory card cover
11. USB port
12. Tripod mount
13. Earphone jack
X800 UM.book Page 1 Monday, December 3, 2007 10:49 AM

2 Preparing the camera for use
English
Rear view
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera before
inserting or removing the battery.
1. LCD display
2. Camera mode: T (Tele) - Zoom-in
PMP mode: Volume up
3. Strap eyelet
4. Camera mode: W (Wide) - Zoom-
out or thumbnail view (playback)
PMP mode: Volume down
5. Camera mode: Play button
PMP mode: Locks/Unlocks all buttons
on the rear of the camera
6. Camera mode: Multifunctional buttons
(including a 4-way control and an
button)
PMP mode: playback controls
7. On-screen instructions (when selecting
a scene mode) or delete photos
(playback mode)
8. MENU button or return to the
previous menu
• It is normal for the camera to become warm during operation, because metal camera
casing can conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet,
it is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display
malfunction, nor will this affect the pictures you take with the camera.
ATo install the battery:
1. Open the battery cover (A).
2. Insert the battery in the correct direction by matching
the + - label on the battery cover (B).
3. Push the battery all the way down, until the battery
lock lever clicks into place (C).
4. Close the battery cover (D).
B
X800 UM.book Page 2 Monday, December 3, 2007 10:49 AM

Preparing the camera for use 3
English
Charging the battery
The battery charge status affects the camera performance. To maximize the performance
and the battery life, fully charge the battery using the specified charger and AC power
adapter, and then fully discharge it through normal use at least once.
Using multifunctional buttons (camera mode)
You can choose camera settings (blue light is on) by pressing the 4-way control or the
button.
1. Left/Focus:
• Scrolls left in menus.
• Selects a focus mode.
2. Up/EV:
• Scrolls up in menus.
• Sets EV (use and to select an exposure value).
3. Right/Flash:
• Scrolls right in menus.
• Selects a flash mode.
4. Down/Drive:
• Scrolls down in menus.
CTo remove the battery:
1. Open the battery cover.
2. Press and hold the battery.
3. Release the battery lock lever.
4. When the battery has come out a little, gently pull it
out the rest of the way.
5. Close the battery cover.
D
To charge the battery:
1. Insert the battery into the battery charger.
2. Connect one end of the AC power adapter to the
battery charger.
3. Connect the other end of the AC power adapter to a
wall outlet.
4. When the battery is being charged, the charger LED
indicator lights up in red. When the battery is fully
charged, it turns into green.
• Damage caused by the use of an incorrect battery charger set is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.
X800 UM.book Page 3 Monday, December 3, 2007 10:49 AM

4 Preparing the camera for use
English
• Selects a drive mode (Standard/Self-timer/Continuous Shoot/Interval Shoot/AEB).
5. : Confirms a chosen setting.
Using multifunctional buttons (Portable Media Player mode)
You can choose multimedia settings (red light is on) by
pressing the playback controls or the button.
1. Left:
• Previous track.
• Scrolls left in menus.
2. Up:
• Toggles among different repeat modes.
• Scrolls up in menus.
3. Right:
• Next track.
• Scrolls right in menus.
4. :
•Play/Pause
• Confirms a chosen setting.
Using a microSD card
The camera comes with internal memory for storing captured images, video clips, or audio
files. You can also add a microSD card to store more files.
Before initial use of a microSD card, press > > Manage Memory >>
to format the card first.
To install a microSD card:
1. Make sure the camera is turned off.
2. Open the memory card cover.
3. Insert a microSD card in the correct direction.
4. Close the memory card cover.
To remove a microSD card:
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Press lightly the edge of the memory card to eject.
4. Close the battery cover.
X800 UM.book Page 4 Monday, December 3, 2007 10:49 AM

Operating the camera (camera mode) 5
English
Setting language
Selects the language version shown on the screen.
To select a language:
1. Press > > Language.
2. Press or > or to locate the language you want.
3. Press .
Setting date and time
When first time using the camera or the battery has been removed from the camera for a
long time, you need to set the date and time. They are used to record when a file was
captured.
To set date and time:
1. Press > .
2. Press or to locate Date/Time, and then press or .
3. Press or to select date and time. Press or to move to another column as
needed.
4. Press .
Operating the camera (camera mode)
The procedure below is a general guideline for basic playback operation. It is
particularly useful if you are new to the camera.
1. Press and make sure the mode switcher is set to the camera mode (as
illustrated).
2. Press > , , , or to locate a desired options (under three different tabs:
, and ), and then press or to make selections.
Remember to follow the on-screen display and
instructions (wherever available) or press for
more information. Next, press corresponding buttons to
access and set more options. At any time, you can
cancel the current operation by pressing to
return to your previous step.
3. Hold the camera steadily with your both hands (or
using a tripod) in the position (as shown right)
without blocking the lens.
4. Press to zoom-in or to zoom-out. (In the
Movie Record mode, you can still adjust the optical
zoom before recording.)
5. Press the shutter halfway to set automatic focus.
Once the focus is set, the focus frame color will turn
from white (unfocused) to yellow-green (focused).
X800 UM.book Page 5 Monday, December 3, 2007 10:49 AM

6 Operating the camera (PMP mode)
English
6. Press the shutter down fully to capture.
7. Release the shutter.
8. In the Movie Record mode, press the shutter to stop video recording.
9. Press to view captured images or recorded videos, and then press , or to move to
different images/videos. You can also press or to zoom-in/out a captured images,
or press to view 9 images on the screen.
Operating the camera (PMP mode)
To use the Portable Media Player feature, firstly you must use a computer to create the
following two folders in the root folder of the microSD card used by the camera:
• the “MP3” folder: Once the folder is created, copy the MP3 files (*.mp3) you want to play
to this folder.
• the “PMP” folder: Once the folder is created, copy the MPEG-4 AVI video files (*.avi;
make sure to use the bundled video conversion software to convert video files into the
format compatible with the camera in advance) you want to view to this folder.
• During zoom-in/out, there is a separator in the zoom bar between and . For
best image quality, it is recommended to use optical zoom only by keeping the
magnification within and the separator.
• Flash is automatically turned off in the Movie Record mode.
• The Movie Record mode records both sound and video. The recording time is
continuous, but recording will stop once the memory card space is full.
• Anytime in the playback mode, you can press to switch to the capture mode.
• At any time, you can press to turn off the camera.
• In capture or playback mode, press to decide what information to show on the
screen.
• To categorize MP3 and MP4 files, you can create up to 100 subfolders under each of
the above two folders.
• The maximum number of files in a folder is 100.
• The TV-out feature is not available in the PMP mode.
• The bundled video conversion software may not be able to convert some video files
that require additional codecs. Please download and/or purchase these codecs before
starting video conversion.
Optical Zoom
Digital Zoom
X800 UM.book Page 6 Monday, December 3, 2007 10:49 AM

Operating the camera (PMP mode) 7
English
Secondly, follow the procedure below:
1. Press and make sure the mode switcher is set to the PMP mode (as
illustrated).
2. Press , and then use the multifunctional buttons to locate an MP3 or
MP4 file you want to play.
3. Press to start playback.
Settings for the PMP mode
While the camera is in the PMP mode, you can press for the following options.
Option Description
Auto Resume Automatically starts playback of the track that was being playbacked last
time in the PMP mode.
Volume Adjusts the volume for playback.
Auto Hide OSD
(for video
playback only)
Shows the OSD (On Screen Display) control panel for a few seconds, and
then hides itself automatically from the screen. To view the OSD control
panel again, press .
X800 UM.book Page 7 Monday, December 3, 2007 10:49 AM

8 Capture mode
English
Capture mode
Item Description Page reference
1 Scene mode 9
2 Flash mode 11
3 Focus mode 12
4 Drive mode 12
5 Zoom bar 5
6 Image size 13
7 Number of shots available --
8 Image quality 13
9 AF area 13
10 Battery status 14
11 Histogram --
12 Exposure value (EV) 14
13 AE metering 15
14 White balance 15
15 ISO sensitivity 16
• In the capture mode, press to toggle among 4 display modes (standard,
complete, none, and rule of thirds). Use the rule of thirds display mode to improve your
composition by placing subjects on at least one of the intersections of these 4
imaginary lines.
• While the shutter is pressed halfway, the shutter speed and the aperture are also
shown on the screen (not available in the Movie Record mode).
X800 UM.book Page 8 Monday, December 3, 2007 10:49 AM

Capture mode 9
English
Scene mode
Select one of the following scene modes to fit your shooting condition.
Icon Mode Description
Auto Lets the camera automatically decide most settings, so
you can capture images with ease.
Manual Lets you decide all available shooting parameters.
Movie Record Captures videos with sound. When viewing the captured
video file later, the icon shows indicating that this is
a video file.
S.S.F.
(Super Shake-Free)
Reduces blur caused by camera vibration, and thus
improves image quality and clearness. ISO value is also
automatically adjusted (maximum ISO value = 2000)
based on the ambient brightness.
Portrait Makes the subject (usually a person) stand out with a
brighter look.
Landscape Used when taking pictures of natural scenery.
Sports Captures a fast-moving subject.
Backlight Compensates for exposure in a strong backlit
environment. Flash is always on.
Night Scene Used when taking a picture in the evening, night, or a
low-light environment.
Beach Used under a very bright light environment such as
beaches.
Snow Used under a very bright light environment such as snow
scenes.
Fireworks Used when taking a picture of exploding fireworks.
Night Scene Portrait Keeps both the subject and the night scene clearly.
Self-Portrait Helps take a picture of yourself (and other subjects if
available).
Building Line contrasts of a building are highlighted.
Soft Flowing Water Captures the moments of motion blur on water.
X800 UM.book Page 9 Monday, December 3, 2007 10:49 AM

10 Capture mode
English
For some scene modes like Auto, options ISO, Metering, and White Balance are not
available. You must select another mode like Manual to enable these options.
To select a scene mode:
1. Press > .
2. The currently selected scene mode shows. Press , , , or to locate another
desired option.
When you are selecting from different scene modes, press for detailed explanation
of each scene mode.
3. Press > .
Landscape Portrait Makes the subject (usually a person) stand out while the
background is blurred slightly.
Web Auction Optimizes image file size for use on the Internet.
High ISO Portrait Takes a clear picture In a low-light environment. Flash is
always off.
Food Captures food by enhancing color brightness and giving
more vivid colors.
Museum Used when taking a picture of subjects in a place where
flash is usually prohibited. Flash is always off.
Candle Light Makes a picture look warm, and thus captures the mood
under candle light source. Flash is always off.
Party Captures the party atmosphere usually under indoor
light source.
Text Takes a picture of clear text by reducing image distortion
usually found on paper, magazines, or books.
Child Retains enough colors and skin tones of the subject.
Sunset Captures the warmth and atmosphere of sunset.
Flower Captures brightly colored flowers by enhancing their soft
outlines.
Pet Takes a clear picture of a pet by showing its correct fur
color.
Voice Record Captures background sound only (no images or videos).
When listening to the captured audio file later, the
icon shows indicating that this is an audio file.
X800 UM.book Page 10 Monday, December 3, 2007 10:49 AM

Capture mode 11
English
Flash mode
The flash offers an additional light source (usually used in a low-light environment). You
can capture an image using one of the following flash modes.
To select a flash mode:
1. Go to the capture mode.
2. Keep pressing to toggle among different flash modes and select a desired option.
You can also set the degree of flash luminosity. To do so, press > > Flash
Intensity, and then select High, Normal, or Low.
Icon Mode Description
Auto flash The flash fires automatically based on the photographic
conditions.
Force off The flash does not fire. Select this mode when flash
photography is prohibited, or when the distance to the
subject is beyond the effective range of the flash.
Force on The flash always fires regardless of the surrounding
lighting conditions. Select this mode when capturing
images with high contrast (backlighting) and deep
shadows.
Auto anti red-eye Reduces the red-eye phenomenon when capturing
natural-looking images of people and animals in low-light
conditions. Be sure to ask the subject to look at the
camera lens or get as close to the camera as possible.
The flash fires automatically based on the photographic
conditions.
Anti red-eye Reduces the red-eye phenomenon when capturing
natural-looking images of people and animals in low-light
conditions. Be sure to ask the subject to look at the
camera lens or get as close to the camera as possible.
The flash always fires regardless of the surrounding
lighting conditions.
Slow sync This “Front Curtain Sync” fires the flash immediately at
the beginning of exposure with a longer shutter speed,
so balanced ambient lighting of the foreground subject
and background scene can be reached in a low-light
environment.
X800 UM.book Page 11 Monday, December 3, 2007 10:49 AM

12 Capture mode
English
Focus mode
To select a focus mode:
1. Go to the capture mode.
2. Keep pressing to toggle among different focus modes and select a desired option.
Drive mode
To select a drive mode:
1. Go to the capture mode.
2. Keep pressing to toggle among different drive modes and select a desired option.
Icon Mode Description
Auto focus Adjusts focus automatically.
Macro Used when capturing images at a close distance.
Super Macro Used when capturing images at a very close distance (1 ~ 5 cm).
Pan Focus Used when you want to capture everything (for example, fast-
moving objects or subjects in the dark) from near to far in an
acceptable focus.
Infinity Used when capturing images at long distance.
Icon Mode Description
Standard Takes one picture at a time.
Self-timer Automatically takes a picture after 2 or 10 second delay.
This mode is useful when you want to be part of the
picture.
Continuous Shoot Continuously takes pictures as long as you keep
pressing the Shutter. The flash is always off in this mode.
Interval Shoot Continuously takes pictures based on the time interval
and the number of pictures you specify when you press
> > Interval Shoot. To start Interval
Shooting, press the Shutter.
Auto Exposure
Bracketing (AEB)
Automatically takes 3 pictures with slightly different
settings in the shutter speed or the aperture value.
X800 UM.book Page 12 Monday, December 3, 2007 10:49 AM

Capture mode 13
English
Image size
To select an image size:
1. Press > > Resolution.
2. Press or , and then select an image size.
3. Press or > .
Image quality
To select an image quality level:
1. Press > > Quality.
2. Press or , and then select an image quality level.
3. Press or > .
AF area
To select an automatic focus area:
1. Press > > AF Area.
Icon Description Icon Description
8 megapixels (3264 x 2448) 3 megapixels (2048 x 1536)
3:2 (8 megapixels; 3264 x 2176) 2 megapixels (1600 x 1200)
16:9 (8 megapixels; 3264 x 1836) VGA (640 x 480)
5 megapixels (2592 x 1944) -- --
Icon Mode Description
Fine Best image quality with the lowest compression rate. File size is
the largest.
Normal Better image quality with medium compression rate. File size is
medium.
Economy Good image quality with the highest compression rate. File size
is the smallest.
Icon Mode Description
Focusing area: Center Focuses on the center area of the objects.
Focusing area: Wide Focuses on a wide range of multiple objects.
X800 UM.book Page 13 Monday, December 3, 2007 10:49 AM

14 Capture mode
English
2. Press or , and then select a focusing area.
3. Press or > .
Face Tracking
Focuses on the people in your composition by automatically detecting and tracking human
faces.
To use Face Tracking:
1. Press > > Face Tracking.
2. Press or , and then select .
3. Press or > .
4. Point the camera to where the people (your subjects) are located. Focus frames of Face
Tracking will automatically detect faces (maximum 9) and show on the LCD screen.
5. Press the shutter to capture the image.
Battery status
Setting EV
EV (exposure value) lightens or darkens the entire image.
Adjust EV when the brightness between the subject and the
background is not balanced, or when the subject occupies
only a small part of the picture.
To select an EV:
1. Press .
2. Press or to select an EV from the EV bar, and then press .
• Due to environmental factors such as lighting, the number of detected faces might be
different from that of the actual faces.
• To achieve the best result, ask your subjects not to turn their faces partially away from
the lens.
Icon Description
Battery power remains adequate.
Battery power is low.
Battery power is very low. You should replace the battery ASAP.
X800 UM.book Page 14 Monday, December 3, 2007 10:49 AM

Capture mode 15
English
AE metering
To select an AE metering option:
1. Press > > Metering.
2. Press or , and then select an AE metering option.
3. Press or > .
White balance
Compensates for color temperatures in different lighting conditions, so white and other
colors can display properly when you capture images.
To select white balance:
1. Press > > White Balance.
2. Press or , and select a white balance option. (When selecting the manual mode,
you must first point the adjustment frame shown on the screen at a blank sheet of white
paper or something similar, and press the Shutter for the camera to detect proper colors.)
3. Press or > .
Icon Mode Description
Automatic Exposure metering:
Matrix
Detects the exposure based on multiple points in
the subject area.
Automatic Exposure metering:
Center Weight
Detects the exposure of the entire shooting
screen, but gives more importance to the values
near center.
Automatic Exposure metering:
Spot
Detects the exposure based on the center spot in
the subject area.
Icon Mode Description
Auto Adjusts white balance automatically.
Daylight Used in bright daylight conditions.
Cloudy Used in twilight or shady conditions.
Tungsten Used when subjects lit by tungsten (incandescent) lighting.
Fluorescent Used when subjects lit by fluorescent lighting.
Manual Used when you want to manually adjust white balance in a
particular lighting condition.
X800 UM.book Page 15 Monday, December 3, 2007 10:49 AM

16 Capture mode
English
ISO sensitivity
ISO configures the camera’s sensitivity to light. The higher the ISO value, the brighter
picture you can take in a low-light environment. Yet, you may see more noise in the picture
as you increase the ISO value.
To select an ISO value:
1. Press > > ISO.
2. Press or , and then select an ISO value.
3. Press or > .
Effect
Adds color filter effects to the image or video you want to capture.
To select an effect:
1. Press > > Effect.
2. Press or , and select an effect option.
3. Press or > .
Icon Description
Automatically sets the ISO value.
Equivalent to color ISO 100/200 film. Used for outdoor
photography in bright sunlight.
Equivalent to color ISO 400/800/1600 film. Used it in a low-light
environment or where the flash light is not allowed.
Icon Mode Description
Normal No effects are added.
Vivid Adds an effect with very clear and bright color tones.
Sepia Adds an effect with dark reddish brown color tones, so
the image or video looks as if it is old.
Black and White (B/W) Adds an effect with monochromatic color tones.
X800 UM.book Page 16 Monday, December 3, 2007 10:49 AM