Bensons for Beds PENELOPE STK770619 User manual

Page<1/2>
Assembly Instructions
Please keep these instructions for future reference.
Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
Important information
— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
—In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame.
Product information
— Upholstered Bedside Cabinet Using Fabric Material.
— Tempered glass on the top.
— Conforms to BS EN14749 & BS EN12150 & BS 5852 standard.
Care instructions
— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— Periodically check & re-tighten any fastener.
— Periodically dust lightly with a clean soft cloth.
— Do not use silicone based furniture polish.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR, AS THIS WILL CAUSE DAMAGE TO THE JOINTS
2 DRAWER PENELOPE BEDSIDE CABINET
STK770619/STK770620/STK770621/STK770622/STK770623/STK770624
Minimum Two
Persons Assembly
Approximate
Assembly Time
5 MIN

Page<2/2>
Product name: 2 DRAWER PENELOPE BEDSIDE CABINET
Date of manufacture: Refer to label on base of this product.
This product contains glass with a nominal thickness of 5mm that is required to comply with
BSEN 12150-1:2015 and the product complies with BSEN 14749:2016.
Important: If a glass component is chipped or broken Consult our customer services department
or nearest store with regards to obtaining a manufacturing specification and shape for
replacement glass quoting the product number and date of manufacture.
Please do not position this product next to or above a direct heat source.
Clean the glass using a damp cloth or leather & glass cleaning product or washing up liquid,
ensure to dry the product fully. Do not use any abrasive cleaners or washing powders as this
may damage the surface.