Berkeley ENVIRON ZHI-HRS-828 User manual
MODEL: ZHI-HRS-828
CONDITIONING STEAMER
ENVIRON
STAND/BASE ASSEMBLY
INSTRUCTIONS
972-926-6488
www.aycllc.com
ATTENTIONS:
The Water Bottle must be filled with clean water before using and
the residual water must be drained.
If there is no vapor coming out during the work, the power must be
turned off.
If the machine is abnormal or the power cord is aged, please do
not use it. The machine must be maintained by a professional or at
a designated location.
INSTALLING STEPS:
Open the carton, assemble the Stand/Base as pictured on other
page.
Take out the Steamer, connect with the supporting pole and fix well.
OPERATIONS STEPS:
Fill the Water Bottle with clean water, tighten the pole, and then put
the bottle in the Steamer.
Turn on the Power Switch and adjust the Timer to a suitable time;
After the vapor comes out, it can be used.
Press the second switch down if the vapor’s temperature is too
high. The power will be switched off automatically when the Timer
is up.
1.
2.
3.
CONTACT US
CAUSE OF WATER LEAKAGE:
Pole of Water Bottle has not been tightened
Rubber Gasket has fallen off
Water Bottle is cracked
SOLUTIONS TO HAIR STEAMER LEAKAGE
Turn off Power Switch and take out the Water Bottle.
Pull out the Drain Rubber Stopper while the water is cooling down.
Replace the Stopper after draining water from the Heater.
Remove the Pole from the bottle and check whether the Rubber
Gasket is inside the Pole. It won’t work if missing the Gasket.
1.
2.
3.
If there are no bubbles in the Bottle, then keep using it.
If there are bubbles in the Bottle, re-tighten the Pole, when
there are no bubbles in Bottle, then we can keep using it.
If there are still bubbles after re-tightening the Pole, please
check whether the Water Bottle or Pole is cracked.
4. Add water to the Water Bottle and tighten up the Pole with a
Gasket to the Bottle.
5. The method of testing Water Bottle leakage; Put the Water Bottle
upside down into a cup with water.
6. Put the Bottle back into the machine and it can be used normally.
Thank you very much for purchasing our product.
Please read our user manual carefully prior to use.
