Besantek BST-HVD2 User manual


BS,T-HVD2
HIGH VOLTAGE DETECTOR
INSTRUCTION MANUAL
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

Index
1. Caution ...............................................
2. Features .............................................
3. Specications and ratings ..................
4. Construction .......................................
5. How to use .........................................
6. Maintenance ......................................
Page
1-2
2
3-4
4
5-6
7-8




1. Caution










& 
& 



 /7
 

  
  
" -
 


-2-
The detector detects a high and extra high voltage in
AC lines. An elongate insulation rod permits checking
of high voltage circuits at safe distance for voltage.
Also it is telescopic, compact, light-weight, easy to
use and handle.
2. Features
● Telescopic, compact, light-weight.
● Light weight, easy to use and handy.
● High-voltage detectable
The equipment, whether in stretched state is
available for high voltage detection 6kV~36.5kV
(Model A)/6kV~81.5kV(Model B)
● Easy to recognize indication
Intermittent lighting in red of a high intensity light
emitting diode and intermittent audible sound of an
electronic buzzer are readily recognizable at a full
daylight or a noisy location.
● Water proof
The detecting head, being tightly enclosed, is free
from any trouble due to dust or water.
● Meets IEC 61243-1
IEC 60068-2-6
IEC 60068-2-32
IEC 60068-2-14

-3-
3. Specications and ratings
Measuring
voltage range 6kV~81.5kV
Operation start
voltage (To ground) 2.7kV
Display
Light : Flashing red light.
Sound : Intermittent sound
50 dB apart 3 m.
Overall
length
Retracted 1370 ± 50mm
Extracted 2450 ± 50mm
Frequency 50/60Hz
Operating
temperature 0°C~40°C
Battery 2 button-cells LR44(1.5V)
Weight Approx.590g (battery included)
Accessory Instruction manual
Soft pouch
Withstand voltage
(On insulating rod) 100kV / 300mm : 1 minutes
Insulation
resistance
2000MΩ min by 1kV / DC
megger at the same testing
location as withstand voltage


-
 

 
 
4. Construction
(1) (2) (3) (4) (5)
·I 
160 (6)
  
  
 
 
  
  
  





-
5. How to use

 
 

 
 
  
 
 
  

  
 
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

-7-
6. Maintenance
● Battery replacement
If lighting is dim or sounding is too low, or if the
equipment does not operate, replace the battery by
a new one.
a. Use a screwdriver to unscrew the screw on back
cover then slide the cover, take out the batteries
and replace with new batteries type(button-cell
LR44 1.5V).
b. Place back cover and secure bay screw.
● Clearing and storage
a. Avoid heavy blows and placing heavy weights
on the machine. Avoid dropping the machine.
b. Please clean the machine after use. Wipe the
machine gently with soft cloth and mild detergent
to avoid using volatile solvents.
c. Keep the surface of the machine clean and
store the machine in dry places. Avoid exposing
the machine to direct sunlight. Avoid placing the
machine in hot, dry, and enclosed indoor areas
with insufcient ventilation.
d. Perform Insulation Testing every six months to
ensure the machine is safe to use.

-8-
e. If the machine is not going to be used for a
long time, remove the batteries and store them
separately. This is to avoid battery liquefaction
and corrosion of internal components which will
cause loss of performance.
f. This machine is operated at high-voltage. If it
malfunctions, please send it to our company
or an authorized dealer for repair. It is absolutely
forbidden to dismantle the machine by yourself
for repair. Our company is not liable for any
damage caused by repairing the machine by
yourself. You are responsible for any unfortunate
consequence caused by the unauthorized repair.
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com