Besantek RGT-HYG13+ User manual

Operation manual for
RGT-HYG13+ large screen
Thermo-Hygrometer

Products Introduction
RGT-HYG13+ large screen Thermo-Hygrometer has high precision and recording
functions. Adopt imported temperature humidity integrated sensor, fast response and
good quality to assure the accuracy and stability.
1. Features:
Fashionable and simple performance, firm structure, high accuracy.
Adopt the bright LED digital tube display, clear display, visible distance is
5~50meters.
Temperature humidity calibration function, when the temperature and humidity
measurement
errors, use this function to calibrate.
Recording capacity:>=43000, RS232-USB interface.
2. Applications:
It has been widely applied in offices, hotel, canteens, school, factory, supermarket,
warehousing, hospital, and indoor environment etc.
3. Performance parameters:
Model
RGT-HYG13+
Temperature accuracy
±0.5℃
Humidity accuracy
±3%RH
Sensor type
External cable length 3m
Measuring range
-40~85℃
Measuring range
0~99%RH
Height of display(inch)
1.8”
Distance (M)
5
N.W(kg)
2.3
Product dimension(CM)
39.5×25.5×5
Packing dimension(CM)
46×31.5×8.5

4. Starter:
（1）Keys and components （RGT-HYG13+)
power and plug
OK button
External sensor
upward button
Temperature display area
downward button
Humidity display area
S function button

5. Key usage:
Key function
Normal mode:press enter setup mode ,press enter temperature
setting, press or button respectively to adjust the value.
Key function
Normal mode：press this key is invalid.
Setting mode:set a negative value.
Key function
Normal mode:press this key is invalid.
Setting mode:set a positive value.
Key function
Normal mode：press this key is invalid.
Setting mode:Confirm button and enter the next step.
For example: Standard temperature is 16 ℃, humidity is 66%RH, and the
measuring temperature is 15.3 ℃, humidity is 66.8%RH. Then difference of
temperature is -0.7 ℃, difference of humidity is +0.8%RH.
Setting Steps: first, press enter setup mode, and then press enter
temperature deviation setting state; press to adjust the temperature is
-0.7 ℃, press enter humidity settings, and press to adjust the
humidity value is +0.8%RH, then press back to normal mode.