Best Choice Products SKY5443 User manual

SKY5443 + SKY5444
Ver. 2
INSTRUCTION
MANUAL
Vibration Platform
with Bluetooth

• Do not cover this device.
• Do not insert or drop any objects into any openings.
• Do not remove the motor hood.
• Do not use this device immediately after eating or drinking.
• Do not use this device after consuming alcohol.
• Do not smoke cigarettes while this device is in use.
• Do not attempt to move or adjust any part of this device unless it is properly assembled.
• Do not use this unit while wearing loose clothing or jewelry
• Do not leave unattended near children or individuals with impairments that may prevent them from
safely operating this device should not use this appliance.
• Before use of this device or any exercise program, consult your physician.
• Do not use this device in conjunction with other medical equipment.
• Do not use this device as a substitute for medical treatment.
• Do not use if you are experiencing lightheadedness or nausea.
• Do not use if you have been diagnosed with a malignant tumor.
• Do not use if you are pregnant, planning to become pregnant, or menstruating.
• Do not use if you have heart-disease.
• Do not use if you have a pacemaker or other medical electronic implants.
• Do not use if you suer from osteoporosis.
• Do not use if you have an artificial limb.
To reduce the risk personal injury, read the following safety notices before operating this item.
• This device is intended for indoor, home use only.
• Use this device only on a stable, level surface.
• Allow at least 8 feet of clearance around device.
• To protect the floor from damage, place a mat under this device.
• Always keep children under the age of 12 away from this device.
• Children under the age of 12 or adults over 60 will require supervision.
• Always keep pets away from this device.
• This device is intended for use by one person at a time.
• Keep the power cord and surge suppressor away from heated surfaces.
• Never leave this device unattended when in use.
• Always unplug the power cord when this device is not in use.
• Inspect and tighten all parts of this device regularly.
• Always unplug the power cord immediately after use, before cleaning, and before performing
maintenance/adjustment.
• Servicing other than the procedures in this manual should be performed by an authorized service
representative only.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this device in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
WEIGHT CAPACITY: 330 lbs
WARNING
MEDICAL WARNINGS
2|
NOTICE

| 3
1 PC
VIBRATION PLATFORM
1 PC
POWER CORD
2 PCS
1 PC
CARABINER CLIP
D
2 PCS
RESISTANCE BAND
PARTS
AB
F
E
5 PCS
EXERCISE BAND
REMOTE CONTROL
C

1. Place your vibration platform on a flat surface and plug into a wall outlet.
2. Press the Program button to select a program. There are 4 programs: P1, P2, P3, and P4.
3. Press the Start/Stop button to start the program.
4. To manually control, set desired session time, then press the Start/Stop button to start.
5. During session, adjust the speed with the Speed + or Speed – buttons.
1. Turn on vibration platform and speakers will automatically be ready to pair.
2. Pair music player with the Bluetooth network named “Bluetooth”.
3. Play music through the built-in speakers.
1. To move device, grasp the handle and lift until the rolling caster contacts the ground.
2. Roll vibration platform to your desired location.
MAIN DIAGRAM
OPERATING INSTRUCTIONS
PAIRING BLUETOOTH
USING HANDLE
4|
NOTE: Flip power switch on before pressing power button.
ROLLING CASTER
HANDLE
FOOTPADS/SUCTION CUPS
POWER INPUT
POWER SWITCH
CONTROL PANEL
B
E
H
I
N
D
RESISTANCE BAND (2)

| 5
CONTROL PANEL
• NEXT: Plays next music track
• LAST: Plays previous music track
• PLAY/PAUSE MUSIC: Start/stop music from connected Bluetooth device
• TIME: Increase session time from 1 and 20 minutes
NOTE: Time will increase 1 minute every press of the button. If you press button while the time is set to
20 minutes, it will cycle back to 1 minute
• POWER: Turn platform on; press again to initiate standby mode
• START/STOP: Initiates or cancels the session
• PROGRAM: Select one of four Programs:
- PROGRAM 1: (LED will show “p1”) Runs at a set rhythm; time and speed cannot be adjusted
- PROGRAM 2: (LED will show “p2”) Runs at a set rhythm; time and speed cannot be adjusted
- PROGRAM 3: (LED will show “p3”) Runs at a set rhythm; time and speed cannot be adjusted
- PROGRAM 4: (LED will show “p4”) Runs at a set rhythm; time and speed cannot be adjusted
• SPEED -: Increase vibration speed; ranges from 1 to 120
• SPEED +: Decrease vibration speed; ranges from 1 to 120
NEXT
LAST
PLAY/PAUSE
MUSIC
TIME POWER START/
STOP
PROGRAM
SPEED -
SPEED +