Best-rite Combo-rite c User manual

123456789012345678901234567890121234567890123456789012345678901212345678901234

Combo-Rite Modular Boards

Assembly Instructions

LayoutOptions

P-1 Writing Board 1 EA

P-2 Side Tackboard 1-2 EA

P-3 Left 4’ H-Bar 1 EA

P-4 Right 4’ H-Bar 1 EA

P-5 Left 5’ H-Bar 1 EA

P-6 Right 5’H-Bar 1 EA

P-7 Top Tackboard 1 EA

Part Drawing Description Qty

WOW Combo-Rite Modular Boards

A 1-1/4” Screw 12-28 EA

B L-Bracket 12-20 EA

C 1/2” Self Drill Screw 14-22 EA

D Map Rail End (short) 1-2 EA

E Map Rail End (long) 1-2 EA

Hardware List

Should you require assistance

during assembly, please call our

Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time

Toll-Free Customer Service

1-866-886-6935

Part List

Type C

Type D-R

Type D-L

Type H

Type F

Type E-R

Type E-L

Hardware List

P-1 1 EA.

P-7 1 EA. A 12 EA.

B 12 EA.

C 14 EA.

D 2 EA.

Part List Hardware List

P-1 1 EA.

P-2 1 EA.

P-6 1 EA.

P-7 1 EA.

A 20 EA.

B 16 EA.

C 18 EA.

D 1 EA.

E 1 EA.

Part List Hardware List

P-1 1 EA.

P-2 1 EA.

P-5 1 EA.

P-7 1 EA.

A 20 EA.

B 16 EA.

C 18 EA.

D 1 EA.

E 1 EA.

Part List Hardware List

P-1 1 EA.

P-2 2 EA.

P-5 1 EA.

P-6 1 EA.

P-7 1 EA.

A 28 EA.

B 20 EA.

C 22 EA.

D 2 EA.

Part List Hardware List

P-1 1 EA.

P-2 2 EA.

P-3 1 EA.

P-4 1 EA.

A 24 EA.

B 16 EA.

C 18 EA.

D 2 EA.

Part List Hardware List

P-1 1 EA.

P-2 1 EA.

P-4 1 EA.

A 16 EA.

B 12 EA.

C 14 EA.

D 1 EA.

E 1 EA.

Part List Hardware List

P-1 1 EA.

P-2 1 EA.

P-3 1 EA.

A 16 EA.

B 12 EA.

C 14 EA.

D 1 EA.

E 1 EA.

Combo-Rite Modular Boards

Find your Board Type and check Part and Hardware

List below, see page 2 for more descriptive details.

To Assemble:

Identify and Separate all the Parts and Hardware.

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

2. This is a 2 person step.

Find the desired location for board on wall. Hold the board on the desired spot while

someone marks the top and bottom of the board on the wall. Make sure marks are able to

be cleaned from wall surface. Remove the board from the wall. Draw leveled line 1/2”

below the top mark line on entire length of your board. Draw another leveled line 1” above

your bottom mark on the wall entire length of the board. These two leveled lines are very

important because you will be using them to fasten L-Brackets (B) to install your board.

See Illustration # 1.

3. Use the leveled lines to fasten L-Brackets (B) with 1 1/4” Screw (A) for top L-Brackets

(B) see illustration #2a, and bottom L-Brackets (B) see illustration #2b. These brackets

would be 16” or 24” apart, based on where wall studs are located. Please make sure your

L-Brackets (B) are secure on the wall by going through wall studs. You should be able to

push the bracets up and down if you have to. If you can not locate wall studs you must use

proper screw anchors per type of wall you have. See Illustration # 2, #2a and #2b.

Illustration # 1

Illustration # 2

Illustration # 2a

Illustration # 2b

Seeillustration#2a

Seeillustration#2b

Topmark

Leveledline

Topmark

Leveledline

Bottommark

P-1

Topmark

Bottommark

Set the bottom of Writing Board (P-1) on

L-Brackets (B) on the wall, make sure

writing board is on the desired location.

While someone holds this panel tightly

against the wall, setting on the bottom L-

Brackets (B), fasten the L-Brackets (B) to

the bottom of Writing Board (P-1) by

using 1/2” Self Drill Screw (C).

The person holding the panel should Con-

tinue firmly pushing the Writing Board

against the wall. Use ladder to reach

comfortably to the top L-Brackets (B).

Push the top L-Brackets (B) down until

they are flush with top of the Writing

Board (P-1), use 1/2” Self Drill Screws

the writing board. See illustrations # 3

P-1

IfyouhaveTopTackboard(P-7)

please follow Step 5.

Illustration # 3

Illustration # 4

Topmark

Top Mark

Leveledline

Leveled

line

Place the two brackets on the back of the

Top Tackboard (P-7) behind the Writing

Board (P-1), as it shown in illustration # 4.

Tackboard (P-7) should be sitting on the

writing board L-Brackets screw heads. Mark

the top of Tackboard (P-7) on the wall in 3

locations preferably over the wall studs.

Remove the TopTackboard (P-7) and pro-

ceed with fastening the L-Brackets (B) by

using the 1 1/4” Screw, 5/8” below the mark

you made on the wall (leveled line). See

illustration # 4a for detail. Place the Top

Tackboard back on the wall, make sure you

are flush with the Writing Board (P-1) on

both sides. Push down the L-Brackets (B) to

the top of the Top Tackboard (P-7), and

fasten using 1/2” Self Drill Screws (C). See

illustration #4b.

P-7

Illustration # 4b Illustration # 4a

Should you require assistance

during assembly, please call our

Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time

Toll-Free Customer Service

1-800-749-2258

Brackets

7. Place the Right 5’ H-Bar (P-6) or Left 5’ H-Bar

(P-5) or both if you have type H Combo-Rite over

the side of Writing Board (P-1) frame. Make sure

notch on H-Bar falls into the end of the writing

board map rail as the arrow shows in illustration #

6. Match the bottom of Writing Board and the H-

Bar (P-4) for the right and (P-5) for the left and if

you don’t have theTopTackboard (P-7) your H-Bar

will only be 4’ long using (P-4) for the right and

(P-3) for the left side of your board. Fasten the H-

bar to the wall with three 1-1/4” Screws (A). See

Illustration # 6 and 6a.

P-1

P-7

P-6

Illustration # 6

E9. Insert all your map rail accessories. Use

Map Rail End (short) (D) if you have H-Bar

(P-6) for right, and or (P-5) for left side,

but if you don’t have H-Bar (P-6) nor (P-5)

use Map Rail End (Long) (E), and fasten

them with 1/2” Self Drill Screws (C). See

illustrations # 8 and 8a.

P-6

P-2

P-7 P-7

P-1

Illustration # 5

Illustration # 6a

6. Place the Side Tackboard against theWriting Board

making sure the bottom of the two panels are even.

Mark the top and bottom of the Tackboard on the wall

and remove the board from the wall. Make a level line

5/8” below the top mark and 1 1/8’ above the bottom

mark line. Fasten L-Brackets (B) on the leveled line

in two spots where wall studs are. See illustrations #

5, 5a and 5b.

Illustration # 5a

Illustration # 5b

Topmark

Levelline

Bottommark

P-7

P-2

Topmark

Levelline

Bottommark

P-6

P-2

P-7

P-1

8. Measure the H-Bar (P-6) and use the side of Side

Tackboard (P-2) that matches the H-Bar length. One of

the four corners on back of the Side Tackboard has a

fastener. DO NOT force that side of the board into the

H-Bar Channel. After placing the correct side of the

Side Tackboard (P-2) into the H-Bar channel fasten your

board to the L-Brackets (B) by using 1/2” Self Drill

Screws (C). See illustrations # 7.

Illustration # 8a Illustration # 8

Illustration # 7

This manual suits for next models

Other Best-Rite Whiteboard manuals

Best-Rite

Best-Rite Black Splash User manual

Best-Rite

Best-Rite 12pk User manual

Best-Rite

Best-Rite Lumina Reversible Boards User manual

Best-Rite

Best-Rite 786 ECO-Wheasel User manual

Best-Rite

Best-Rite Platinum Reversible 669 User manual

Best-Rite

Best-Rite Platinum Reversible 669RU User manual

Best-Rite

Best-Rite Baby Folding Wheasel 784 User manual

Best-Rite

Best-Rite Modular Room Divider User manual

Best-Rite

Best-Rite 62382 User manual

Best-Rite

Best-Rite Storage Wheasel User manual

Best-Rite

Best-Rite 795 Modifier XV User manual

Best-Rite

Best-Rite Nest Easel User manual

Best-Rite

Best-Rite MOORECO 62853 User manual

Best-Rite

Best-Rite 74955 User manual

Best-Rite

Best-Rite New-Rite User manual

Best-Rite

Best-Rite SPLASH CORK User manual

Best-Rite

Best-Rite Euro Reversible 667RU User manual

Best-Rite

Best-Rite Storage Wheasel User manual

Best-Rite

Best-Rite Baby Folding Wheasel 784-T User manual

Best-Rite

Best-Rite 62542 User manual

Popular Whiteboard manuals by other brands

EGAN

EGAN A-Frame VersaMobile Assembly & installation

HitachiSoft

HitachiSoft StarBoard FX-TRIO-77 user guide

Touchboards

Touchboards PLUS Software Operation manual

George Home

George Home Wooden easel Assembly guide

Mimio

Mimio Xi Setup guide

Huawei

Huawei IdeaHub Board 2 Tips

CleverMic

CleverMic e-Blackboard manual

Plus

Plus Magicolor Plus user manual

Brunner

Brunner team Assembly instructions

Safco

Safco Impromptu 8511 Assembly instructions

Copernicus

Copernicus Premium Royal Inspiration Station Assembly guide

VADDIO

VADDIO SQUIGGLE BOARD 999-5446-000 Installation and user guide

Steren

Steren PIZ-100 instruction manual

Turning Technologies

Turning Technologies MOBIVIEW quick start guide

SMART

SMART SMART Board quick reference

promethean

promethean ActivBoard 500 PRO quick start guide

Fromm&Starck

Fromm&Starck STAR-WBM-08 user manual

3-form

3-form Divy Mobile 200.65 Solution Document

Best-Rite Combo-Rite C User manual

Popular Whiteboard manuals by other brands