Best ILB6 User manual
SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Best by Broan, P.O. Box 140, Hartford, Wisconsin 53027
HLB6
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
0 100 200 300 400 500 600 700
AIR FLOW RATE (CFM)
STATIC PRESSURE (IN-WG)
VERTICAL
HORIZONTAL
IN-LINE BLOWER
MODEL ILb6
Powerful yet quiet blower - exhausts the cooking area
from a remote location.
FEATURES
BLOWER:
• Low RPM for quiet operation
• Resilient anti-vibration mounts
• Dynamically-balanced, galvanized steel, centrifugal
blowerwheelsforquiet,efcientperformance
• Permanently lubricated, thermally protected motor
• Plug-in motor rated at 120 VAC
• Designed for continuous operation
HOUSING:
• Rugged galvanized steel
• 8-position mounting brackets for easy installation and
greater adaptability to various mounting requirements
• Automatic backdraft damper located within exhaust
duct connector
• Factory-shipped in horizontal discharge position
• May be converted to vertical discharge
• Suitable for kitchen installations
ACCESSORIES INCLUDED:
• 4½-inch x 18½-inch integrated duct connectors
• Two (2) 4½-inch x 18½-inch to 10-inch-round
transitions
• Hangerkit-foradditionalinstallationexibility
• Range hood rough-in kit with integrated 10-inch duct
connector
TYPICAL SPECIFICATION
In-Line Blower shall be Best by Broan Model ILB6.
Unitshall have galvanized steelhousing.Housingto have adjustable
mounting brackets.
Blower to include hanger kit, two (2) 4½-inch x 18½-inch to 10-inch-
roundtransitions,4½-inchx18½-inchintegratedductconnectors,and
a range hood rough-in kit with integrated 10-inch duct connector.
Automatic backdraft damper to be located within exhaust duct
connector. Duct connectors, blower assembly and wiring plate shall
be adjustable for either horizontal or vertical installation.
Blower unit shall be removable
from housing and will have
galvanized steel, centrifugal-
type blower wheels. Motor to
be permanently lubricated and
mounted with resilient anti-
vibration mounts.
Air delivery shall be no less than
listed. All air ratings shall be
certiedbyHVI.UnittobeUL
and cUL listed.
70E 99043708D
* Performance ratings include the addition of a 10” round
transition on inlet and outlet.
SPECIFICATIONS
Volts Hz Amps CFM Duct Weight
120 60 2.9 600 (V) 4½”x18½” * 48.0 lbs.
600 (H)
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in AMCA’s state-
of-the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
4½” x 18½”
DUCT CONNECTOR
Table of contents
Other Best Blower manuals
