BESV CF1 User manual

Quick Assembly Guide - BESV CF1 LENA
Quick Assembly Guide
BESV CF1 LENA

Quick Assembly Guide - BESV CF1
1
V. 0.0, 20150513
Contents
1. What’s in the Box ........................................................................................................................................... 2
1.1 Main Box Contents............................................................................................................................. 2
1.2 Accessary Box Contents..................................................................................................................... 2
1.3 Battery Box Contents ......................................................................................................................... 2
2. Assembly Procedures ..................................................................................................................................... 3
2.1 Front Wheel and Fender................................................................................錯誤! 尚未定義書籤。
2.2 Stem and Handle Bar.......................................................................................................................... 6
2.3 Pedal................................................................................................................................................... 8
2.4 Seat Post and Saddle Set..................................................................................................................... 8
2.5 Battery ................................................................................................................................................ 9
3. Checklist........................................................................................................................................................11

Quick Assembly Guide - BESV CF1
2
1. What’s in the Box
1.1 Main Box Contents
1. Main Bike Assembly
2. Accessary Box
3. Battery Pack Box
4. Front Wheel Set and Fender Stay
1.2 Accessory Box Contents
1. User Manual
2. Charger
3. Pedal
4. Screw set for Fender
5. Reflective on Spoke
1.3 Battery Box Contents
1. Battery Pack

Quick Assembly Guide - BESV CF1
3
2. Assembly Procedures
2.1 Front Wheel and Fender
Find the screws and nut in the accessory box
Description
For assembly the fender, need to
find the screw and nut in the
accessory box.
Assemble the fender and stay
Description
Assemble the fender and stay,
show as the photo. Using the
clip to fix the stay.
The torque is 5~7Nm.
Check the position of stay
Description
On the stay had two marks for
alignment. Need to check the
stay’s position as the photo.

Quick Assembly Guide - BESV CF1
4
Assemble front fender
Description
Assemble the fender on the
front fork.
Please note the fender’s bracket
need to assemble behind the
fork that show as the photo and
don’t tighten it.
Assemble left fender stay
Description
Assemble the fender stay that
show as the photo.
The torque is 5~7 Nm.
Assemble the front wheel
Description
Assemble the front wheel on the
fork. Please note, front motor
had 2 stopper washer and the
stopper need inside the
drop-out.

Quick Assembly Guide - BESV CF1
5
Assemble the front wheel
Description
Fix the front wheel that show as
the photo.
The torque is 35~40 Nm.
Connect the motor cable
Description
Inset the motor cable into the
fork that show as the photo. And
then connect the motor cable.
Please note that there has a
arrow on the connector. Need
align first and connect.
Assemble right fender stay
Description
Assemble the right stay on the
fork that show as the photo.
Please note that the motor cable
is under the stay.

Quick Assembly Guide - BESV CF1
6
Check the gap and center of the fender
Description
Need the check the gap between
fender and wheel with average
gap by visual inspection. And
the fender and wheel need to
check on the same center.
Assemble the V-brake
Description
Assemble the V-brake that show
as the photo.
2.2 Stem and Handlebar
Adjust the handle-bar and stem
Description
Press the button on the side and
the open the stem lever to adjust
the angle of stem and
handle-bar.

Quick Assembly Guide - BESV CF1
7
Adjust the stem angle
Description
Release the screw inside the
stem to adjust the angle of stem.
And then tighten the screw.
Lock the stem
Description
Closure stem lever. If stem lever
is loosen, adjust the screw on
the stem, “+” to tighten, “-“ to
loosen.
Please note that Lever closure
min force 12 ~15kgf.
Adjust HMI angle
Description
Release the screws under the
HMI and then adjust the angle
of HMI.

Quick Assembly Guide - BESV CF1
8
2.3 Pedal
Assemble left pedal
Description
Assemble the other one with
marking “L” onto the left crank
counterclockwise and tighten it.
Assemble right pedal
Description
Assemble the pedal with
marking “R” onto the right
crank clockwise and tighten it.
2.4 Seat Post and Saddle
Adjust seat post
Description
Open seat clamp lever and
adjust the height of seat post.

Quick Assembly Guide - BESV CF1
9
Adjust the saddle
Description
Release the screws under the
seat post and then adjust the
angle of saddle.
The torque for seat post screw is
8~10Nm.
2.5 Battery
Remove Protection cover
Description
Remove protection cover on the
connector of battery.
Open the battery cover
Description
Turn the key to open the battery
cover.

Quick Assembly Guide - BESV CF1
10
Insert the battery into the frame
Description
Insert the battery into the frame
that show as the photo.
Close the battery csver
Description
After inserted the battery, close
the battery cover and make sure
the cover is locked.

Quick Assembly Guide - BESV CF1
11
3. Checklist
3.1 Check the tire pressure is normal.
3.2 Check the function of the brakes, derailleur, and chain.
3.3 Check the function of the electric module and the battery power. Please refer to CF1 LENA user manual.
Finish BESV CF1 Quick Assembly.