Better Bathrooms BeBa-28232 User manual

Zanda Single Outlet Shower Valve
BeBa_28232 / BeBa_28233
Single-person assembly
Tools required
We always recommend using professional
tradespeople to install your product
V1_06.01.22

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
log in to your account and contact our customer services team via your self-serve
portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us
Important information
Please read these instructions thoroughly and retain for future reference
1.To avoid scratches and damage to kit surfaces, wear protective gloves when
assembling/ installing the system.
2.Prior to installation, check the product for transport damage. Damage, even though it will
not be visible,can significantly affect system performance after the installation.
3.System must be flushed prior to installation.
4. Technical Specifications:
Operating Pressure:
Min: 100kPa/1.0bar
Max: 500kPa/5.0bar
Optimum: 100kPa/1.0bar - 500kPa/5bar
Recommended installation of pressure limiting valve if supply exceeds 500kPa
Operating Temperature:
Hot: Max 80°C
Cold: Min 5°C
Hot and Cold Pressures must be balanced

Inlet Connections:
All G½"
NOTE:
- After installation all connections must be checked for leaks.
- All installations must be carried out in compliance with relevant water regulations.
Parts / Diagrams
3 ASBQ0050-XX Wall plug and screw 4
2 APTCT0513-P1 Plate 1
1 AF-L3B133CP-1 Main body 1
NO. Part NO. Part Name QTY Remark
Tools required
Electric Drill Pen Screwdriver

Installation

Maintenance and Cleaning
To clean all surface, use only a soft cloth(microfiber) and mild detergents (like soap) and
then rinse thoroughly with clean water and dry with a soft cloth. Remove lime deposits
using a mild dishwasher liquid.No abrasive chemicals or materials can be used on the
product.
Regularly (at least once a quarter) clean, rinse and check the system, and if your water
type differs from the standard parameters(such as pressure and hardness), adjust the
frequency to the prevailing conditions, bearing in mind that the use of system under non-
standard conditions decreases its useful life and the lack of maintenance and care
drastically reduces it.