Elo TouchSystems DMS-SA19P-EXTME User manual

Revision C
P/N E001012
www.elotouch.com
Quick Installation Guide
Expansion Module
for ESY-X Series
© 2017 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.
North America
800-ELO-TOUCH
Tel [phone]
Fax [phone]
[email protected]
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
[email protected]
Latin America
Tel [phone]
Fax [phone]
EloSales.LAT[email protected]
Elo Touch Solutions Technical Support
Online self-help:
www.support.elotouch.com
1x
Kit contents:
1x
4x
M4 Mounting screws
DMS-SA19P-EXTME
Model
name
Substance Name and concentration of hazardous substances
contained in product
醚
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

connector XOOOOO

Diode XOOOOO

Resistor XOOOOO

Crystal XOOOOO

Remove shield cover, cable cover, and stand. Retain the 4 screws for the
stand.
Connect module cable to computer, fasten with 4 screws included with
expansion module kit.
Reinstall cable cover, shield cover, and stand.