Better Bathrooms BeBa 27536 User manual

1
ROUND LED-ILLUMINATED
MIRROR WITH DEMISTER
Black Illuminated Mirror 600 x 600mm
BeBa_27536
Black Back-Lit Mirror 800 x 800mm
BeBa_27537
Brushed Brass Illuminated Mirror 600 x 600mm
BeBa_27577
Brushed Brass Back-Lit Mirror 800 x 800mm
BeBa_27578
SAFETY
•SINGLE-PERSON ASSEMBLY
•LED LIGHT
•IP44 INGRESS PROTECTION

2
CONGRATULATIONS ON YOUR PURCHASE
Our aim at Better Bathrooms is to bring you extraordinary bathroom products,
for less.
If you’re after a modern, traditional, or a totally unique style bathroom, we
have the fittings and fixtures to bring your ideas to life, so you can fall in love
with your space every day.
We hope your new product goes above and beyond your expectations.
However, should any problems occur, please:
•Log in to your account and contact our customer services team via your
self-service portal –betterbathrooms.com/CustomerAccount/Login
•Contact us via betterbathrooms.com/contact/contact-us
CONTENTS
SAFETY
3
BATHROOM ZONES
4
PARTS SUPPLIED
5
TOOLS REQUIRED
5
INSTALLING THE CABINET
6
OPERATION
7
CLEANING AND MAINTENANCE
7
TECHNICAL SPECIFICATION
8

3
SAFETY
•The fitting should be installed by a qualified electrician.
•This fitting is only suitable for connection to a 220V~50Hz
earthed supply in accordance with current IEE wiring
regulations, and should be installed in accordance with
local Building Regulations.
•This is for domestic, indoor use only.
•The fitting should be connected to a dedicated lighting
circuit which must be protected by a 5-amp fuse (or a 6-
amp miniature circuit breaker).
•Before installing the fitting ensure the mains supply is
switched off, and that the appropriate fuse is removed (or
appropriate circuit breaker is switched off) before
commencing installation. Ensure that measures are taken
to prevent the supply from being inadvertently
reconnected.
•If there is a “Minimum Distance” Label, please do not
allow Flammable Materials to rest within that distance
from the lamps.
•This product may contain delicate parts –be careful
during handling and maintenance to avoid breakage.
•If any modification is made to the fitting it will invalidate
the warranty and may render the product unsafe.
•A defective appliance may cause electric shock. Never
switch on a defective appliance. Unplug the appliance
from the mains or switch off at the circuit breaker in the
fuse box before seeking assistance.
•This product is IP44 rated, and so no part of the
installation is allowed to be within bathroom Zones 0,1.
Installation is permitted within Zone 2.
•This product must be earthed.

4
BATHROOM ZONES
Zone 0:
The interior of the bathtub or shower basin.
Zone 1:
The area around the bathtub or shower
basin up to a height of 2.25m above the
floor
Zone 2:
The area stretching to 0.6m outside the bath
or shower and above the bath or shower if
over 2.25m

5
PARTS LIST
TOOLS NEEDED FOR INSTALLATION
SCREW x2
D6 WALL PLUG x2
ALUMINIUM
BAR
TAPE
MEASURE
SPIRIT
LEVEL
ELECTRIC
DRILL
SCREWDRIVER
HAMMER
8MM
DRILL BIT
PENCIL

6
INSTALLATION
IMPORTANT: Before commencing installation, ensure that
there are no pipes or wires located behind the wall that you will
be drilling into.
•Ensure that the hanging location has been decided upon and
marked clearly to avoid unwanted damage in the wall due to
incorrect positioning.
•Check there the mirror is not damaged prior to installation.
•Take care unpacking, do not use a sharp blade to open as
this may damage the mirror and void your warranty.
INSTALLATION
The cabinet is supplied with a hanging bar to mount the cabinet onto the wall. At
the back of the cabinet there is a corresponding bar which is designed to slot onto
the hanging bar.
1. Choose the desired position of the cabinet, and from that determine the
required position of the hanging bar.
2. Hold the hanging bar in position, using a spirit level to ensure it is level.
3. Use a pencil to mark the position of the 3 holes on the wall.
4. Place the hanging bar to one side, and drill the holes with a suitable drill bit.
5. Insert wall plugs into the holes, ensuring they are flush to the wall.
6. Place the hanging bar onto the wall, lining up the 3 holes with the wall plugs.
7. Secure the hanging bar to the wall using the supplied screws.
8. You will now be able to hang the cabinet. Carefully lower the cabinet onto the
hanging bar, ensuring that is secure and will not slide.
9. Open the cabinet door and mark the wall with a pencil through the security
hole on the back panel.
10. Remove the cabinet, drill the hole then place a wall plug into the hole you

7
have just drilled.
11. Hang your cabinet back up onto the hanging bar and ensure that the in the
cabinet is lined up with the wall plug.
12. The cabinet should now be connected to a suitable fused spur following
current regulations and guidance. We would advise for this to be situated
directly behind the cabinet below the hanging bar. When connecting ensure
that enough cable is left to allow the cabinet to be safely removed from the
hanging bar.
13. Secure the cabinet to the wall using a screw through the security hole and
into the wall plug you previously installed.
OPERATION
Your mirror has a touch switch towards the base of the
mirror. Tap it once to turn on the lights and the demister.
Tap again to turn off the lights and demister.
Hold down the button to change the lights from warm
white to cool white and back again.
CLEANING AND MAINTENANCE
Never use products containing bleach or abrasive cleaners, as this will have a
detrimental effect on the appearance and lifespan of the product.
Use a clean microfibre cloth to clean the mirror.

8
TECHNICAL SPECIFICATION
Model
BeBa_27536
BeBa_27537
BeBa_27577
BeBa_27578
WxHxD (mm)
600x600x39
800x800x39
600x600x39
800x800x39
Net Weight (Kg)
4.6
7.7
4.6
8.2
Power Cord
length (cm)
45
55
45
70
Rated Power (W)
24
33
24
33
IP Rating
IP 44
IP 44
IP 44
IP 44
Input
220 V-240 V 50 Hz
This product contains a light source of energy efficiency class F.
DISPOSAL
Recycling facilities are now available for all customers at which you can
deposit your old electrical products. Customers will be able to take any old
electrical equipment to participating sites run by their local councils.
Please remember that this equipment will be further handled during the
recycling process, so please be considerate when depositing your
equipment. Please contact the local council for details of your local
household waste recycling centers.
At the time of printing the product contains no substances listed within
Annex XIV of the Reach Regulations (EC) 1907/2006. In accordance with Article 59 of the
same regulation the following substances are contained within the product at permitted
levels: Cadmium.
As a responsible manufacturer the regulations are monitored to ensure continued
compliance. Further information can be provided upon request.