Better Homes and Gardens Granary BHW-10024 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2019-10-09 Rev. 0001-A
Granary Modern Farmhouse Console Table
Stock # BHW-10024
# BHW-10025
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Granary Modern Farmhouse Console Table
MODEL # BHW-10024 / BHW-10025
MADE IN VIETNAM
SPECIAL NOTE
Please read the instruction sheets completely before assembly. Examine all packaging
material before discarding carton. Remove any remaining staples from the carton before
discarding. Remove all parts from carton and separate into groups as indicated on part
list. Please ensure all parts are included prior to assembly. Use of power tools to
complete assembly is not recommended.
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
MAXIMUM LOAD 90.7 kg / 200 lb
MAXIMUM LOAD 22.7 kg / 50 lb
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY. TO AVOID
COLLAPSE OR INJURY, DO NOT SIT, STAND OR CLIMB ON THIS TABLE. DO NOT STACK
HEAVY OBJECTS ON THIS TABLE. NOT A TOY.

3
IMPORTANT
Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-
abrasive surface. You will need the parts identified on page 4 of this instruction manual.
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED
OFF WITH DAMP CLOTH.
Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.
You are now ready to assemble the unit.
GLUE
XX
FINAL
1 2 43

4
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Top Panel (Qty. 1) B- Side Frame (Qty. 2) C- Bottom Panel (Qty. 1)
D- Top Stretcher (1) 1/4" x 50 mm Bolt (2) Lock Washer
(Qty. 2) (Qty. 18+1 extra) (Qty. 18+1 extra)
(3) Flat Washer (4) M10 x 40 mm Wood Dowel (5) Wood Plug
(Qty. 18+1 extra) (Qty. 8+1 extra) (Qty. 8+1 extra)
4 mm Hex Wrench (Qty. 1) Glue (Qty. 1) Touch-up Pen (Qty. 1)
Tools required: Hex wrench (provided) and rubber mallet (not provided).

5
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Insert four Wood Dowels (4) into the inner holes of the Bottom Panel (C). Tap in with a rubber mallet, if
necessary. Make sure that you use a small amount of glue with both ends of all dowels.
NOTE: It is very important to use a small amount of glue on both ends of dowels.
3. Glue two Wood Dowels (4) into the inner holes of each Top Stretcher (D).
④ x 8
4
4
4
4
4
D
x 2
C
4

6
Assembly Instructions
4. Align and attach the Top Stretchers (D) to the Top Panel (A) with six 50 mm Bolts (1) and six Washers (2
and 3).
1
2
3
2
3
1
A
D
D
① x 6 ② x 6 ③ x 6

7
Assembly Instructions
5. Align and attach one Side Frame (B) to the assembled Top Stretchers (D) with two 50 mm Bolts (1) and
two Washers (2 and 3).
① x 2 ② x 2
③ x 2
B
D
D
123
123

8
Assembly Instructions
6. Attach the Bottom Panel (C) to the Side Frame (B) with two 50 mm Bolts (1) and two Washers (2 and
3).
A
C
B
123
123
① x 2 ② x 2
③ x 2

9
Assembly Instructions
7. Repeat the same procedure to attach the other Side Frame (B) at the opposite end.
B
B
1
A
C
2
3
2
3
1
2
3
1
2
3
1
① x 4 ② x 4
③ x 4

10
Assembly Instructions
8. Fasten the Top Panel (A) to the top rails of Side Frames (B) with four 50 mm Bolts (1) and four
Washers (2 and 3).
A
C
B
B
321
321
① x 4 ② x 4
③ x 4

11
Assembly Instructions
9. Stand the unit upright and position it at the desired location.
10. Plug the Wood Plugs (8) onto the Side Frames (B) to conceal the bolts.
⑤ x 8
A
C
B
B
5

12
Care and Maintenance
 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
 Using solvents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Always use coasters under beverage glasses and flowerpots.
 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
 In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
 Check bolts/screws periodically and tighten them if necessary.
Further Advice about Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Follow these important and helpful tips
that will enhance your furniture as it ages.
A touch-up pen has been provided to minimize the small nicks or scratches that may occur during
assembly or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair
or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is
designed to meet your highest expectations. We guarantee that you will immediately see the value of
our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from
State to State.
Customer Service: 866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com

ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD.
POR FAVOR LEA Y MANTENGA PARA USO FUTURO.
Fecha 2019-10-09 Rev. 0001-A
Mesa Consola Granary Modern Farmhouse
Modelo # BHW-10024
# BHW-10025
ENSAMBLE REQUERIDO POR ADULTO
Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto
a la tienda donde lo compro. Por favor llame a nuestro departamento de ayuda al cliente teniendo su
instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica:
866-942-5362
Hora estándar del Pacífico: 8:30 a.m. - 4:30 p.m., de Lunes a Viernes
O visite nuestra página de Internet 24 horas al día, 7 días a la semana para asistencia
www.whalenstyle.com
O mande un correo electrónico a [e-mail]
NÚMERO DE LOTE:
FECHA DE COMPRA: / /

2
FABRICANTE: Whalen Furniture Manufacturing
CATALOGO: Mesa consola Granary Modern Farmhouse
MODELO # BHW-10024 / BHW-10025
HECHO EN VIETNAM
NOTA ESPECIAL
Por favor lea todo el instructivo antes de ensamblar. Examinar todo el material de
empaque antes de tirar el cartón. Retirar cualquier grapa del cartón antes de tirar. Retirar
todas las partes del cartón y separar en grupos como es indicado en la lista de partes. Por
favor de asegurar que todas las partes están presentes antes del ensamble. El uso de
herramientas eléctricas para completar el ensamble no es recomendado.
M Á X I M O P E S O RE CO M E N DAD O
CARGA MÁXIMA 90.7 kg / 200 lb
CARGA MÁXIMA 22.7 kg / 50 lb
ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS
INDICADOS. SI SE EXCEDE EL PESO MÁXIMO, PODRIA RESULTAR EN UNA
INESTABILIDAD DE LA UNIDAD CAUSANDO POSIBLES LESIONES. PARA EVITAR UN
COLAPSO O LESION, NO SENTARSE, PARARSE, O SUBIRSE A ESTA MESA. NO PONER
OBJETOS PESADOS EN ESTA MESA. NO ES UN JUGUETE.

3
Importante
Antes de comenzar: Abra, identifique y cuente todas las partes antes del ensamble. Coloque las piezas sobre
una superficie plana y no abrasiva. Tendrá las partes identificadas en la página 4 de este manual de
instrucciones.
NOTA: ES MUY IMPORTANTE EL USO DE GOMA CON LAS CLAVIJAS DE MADERA. EL. EXCESO
DE PEGAMENTO SE PUEDE LIMPIAR CON UN PAÑO HÚMEDO.
Inserte la clavija por lo menos a la mitad del camino golpeando ligeramente con un mazo de goma, SI ES
NECESARIO.
Está listo para el ensamble de esta unidad.
GLUE
XX
FINAL
1 2 43

4
Lista de partes y material de ferretería
Por favor lea completamente las instrucciones y verifique que estén todas las partes ferretería antes de
iniciar el ensamblado.
A- Panel superior (Cant. 1) B- Marco lateral (Cant. 2) C- Panel inferior (Cant. 1)
D- Soporte superior (1) Perno de 1/4" x 50 mm (2) Arandela de presión
(Cant. 2) (Cant. 18+1 extra) (Cant. 18+1 extra)
(3) Arandela plana (4) Clavija de madera de M10 x 40 mm (5) Tapa de madera
(Cant. 18+1 extra) (Cant. 8+1 extra) (Cant. 8+1 extra)
Llave hexagonal de 4 mm (Cant. 1) Pegamento (Cant. 1) Plumón (Cant. 1)
Herramientas requeridas: Llave hexagonal (provista) y mazo de goma (no provista).

5
Instrucciones de ensamble
1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas.
Ensamblar la unidad en un piso alfombrado o en el cartón vacío para evitar rasguños.
2. Insertar 4 clavijas de madera (4) en los agujeros internos del panel inferior (C). meter con el mazo de
goma, si fuera necesario. Asegurar de usar una cantidad pequeña de pegamento en ambos extremos de la
clavija.
Nota: Usar una cantidad pequeña de pegamento en ambos lados de las clavijas.
3. Pegar 2 clavijas de madera (4) en los agujeros internos de cada soporte superior (D).
④ x 8
4
4
4
4
4
D
x 2
C
4

6
Instrucciones de ensamble
4. Alinear y adjuntar los soportes superiores (D) al panel superior (A) con 6 pernos de 50 mm (1) y 6
arandelas (2 y 3).
1
2
3
2
3
1
A
D
D
① x 6 ② x 6 ③ x 6

7
Instrucciones de ensamble
5. Alinear y adjuntar un marco lateral (B) a los soportes superiores ensamblados (D) con 2 pernos de 50 mm
(1) y 2 arandelas (2 y 3).
① x 2 ② x 2
③ x 2
B
D
D
123
123

8
Instrucciones de ensamble
6. Adjuntar el panel inferior (C) al marco lateral (B) con 2 pernos de 50 mm (1) y 2 arandelas (2 y 3).
A
C
B
123
123
① x 2 ② x 2
③ x 2