Better Homes and Gardens BH45-084-599-01 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2016-01-07 Rev. 1 Factory: WEWOWO
Mercher Writing Desk
Stock # BH45-084-599-01
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
it was purchased. Please call our customer service number and have your instructions and parts list ready to
provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our website 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Mercer Writing Desk (BH45-084-599-01)
MADE IN CHINA
THIS UNIT IS INTENDED FOR USE ONLY WITH THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
M
A
XIM
UM
LOAD
30
lb. (
1
3.
6
kg)
M
A
XIM
UM
LOAD
200
lb. (
90
.
9
kg)
MAXIMUM RECOMMENDED WEIGHT LOADS

3
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Desk Top (1) B- Metal Side Frame (2)
(1) 7/8’’ Bolt (2+1extra) (2) 1-1/8’’ Bolt (8+1 extra)
(3) Lock Washer (10+1extra) (4) Flat Washer (10+1 extra)
4 mm Allen Wrench (1) Touch-up Pen (1)
Tools required: Allen wrench (provided).

4
Assembly Instructions
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Place the Top Frame (A) upside down on a scratch free surface, as shown.
3. Align and attach one Metal Side Frame (B) to the Desk Top (A) by using four 1-1/8" Bolts (2) with
Lock Washers (3) and Flat Washers (4) from inside of the Desk Top (A) through the drilled holes on the
apron side rail and screw into the threaded sockets on the Metal Side Frame. Fasten the Metal Side
Frame (B) to the Desk Top (A) by inserting one 7/8” Bolt (1) with the Washers (3 and 4) through the
drilled hole on the top plate and screw into place. As shown.
4. Repeat last step with the other Metal Side Frame (B).
A
B
B
B
A
1
4
3
2
4
3
A
B
Lock Washer
(10 used in this step)
③
Flat Washer
(10 used in this step)
④
1-1/8” Bolt
(8 used in this step)
②
7/8” Bolt
(2 used in this step)
①

5
Assembly Instructions
5. Ask for assistance to stand the unit upright and position it at the desired location. If necessary, adjust the
pre-attached Floor Levelers at the bottom of the Metal Side Frames (B) to level the unit.
6. You can flip down the drawer front to convert it into a keyboard tray. If you need to remove the pullout
drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the
ball bearing slides up on one side and down on the other side, and then pull the drawer completely out.
As shown.
NOTE: To place the drawer back, simply push the ball bearing cart all the way to the end of the slides
(in both sides), and align the slide runners on the drawer with the slide tracks on the unit. Push it
carefully inside until it stops. If the drawer does not go in smoothly, please take it out and repeat the step.
B

6
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or
shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to
State.
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com