Better Rest SoClean User manual
www.betterrestsolutions.com
CPAP Sanitizing System
Automated, safe, natural sanitizing
that’s easy to use.
Clean
SOLUTIONS
Thank you for your purchase of the SoClean CPAP sanizing
system. We at Beer Rest Soluons are commied to
providing innovave and safe methods that can improve
the health and well being of our customers. It is our hope
that the SoClean will do just that for you. Please familiarize
yourself with this manual, and the operaon of the unit.
Aer a few easy steps, you’ll nd that daily sanizing of your
CPAP equipment has never been easier. This unique process
will completely eliminate bacteria, mold, viruses, and other
pathogens. It does all this by using gaseous acvated oxygen
alone–no need for liquid sanizers or messy preparaons.
Please feel free to contact us with any quesons or concerns
you might have.
Included with your SoClean:
5 lbs
12.25”l x 6”w x 7”h
4’ 8”
Electrical: 12 Vdc
5 Was
Warranty: 1 year warranty
Index & Technical Specicaons
........................................................3
Safety...................................................................................4
...................................................................5
....................5
............................................6
...............................................7
5. SoClean Check Valve .........................................................7
....................................................................8
.........................................................13
.......................................................14
Warranty ............................................................................ 15
Index & Technical Specicaons 3
4 SoClean Safety
Keep away from water sources including rain,
bathtubs, sinks and pools.
Keep away from children. It is not a toy!
Do not use in explosive air environments, near
gas vapors, or other ammables, etc.
Do not place any items on top of SoClean
Unit, parcularly ammables or ignitable items.
Never place any living thing (including pets)
inside.
Do not dismantle the SoClean unit.
Do not run the SoClean for more than 30
minutes consecuvely.
Please be aware that there are sensive
electronics inside the SoClean. If you need to clean your
SoClean, wipe with a damp cloth. Do not submerge your
SoClean or use any chemical cleaners to clean out the
inside of the SoClean chamber.
SoClean Safety
What’s Inside / Using the Neutralizing Pre-Wash 5
Open your SoClean by
pulling the lower end of
the latch away from the
machine and allowing the
upper half of the latch to
disengage from the lid.
Inside you’ll nd the power cord, acrylic sleeve, injecon
ng with hose and check valve, and bole of neutralizing
pre-wash.
The SoClean pre-wash is a special fragrance-free
hypoallergenic cleansing soluon for your CPAP equipment.
We strongly recommend that you use the SoClean pre-wash
(or a fragrance-free dish soap) anyme you hand wash your
CPAP equipment.
before the rst use of your SoClean
and anyme you introduce new equipment to your CPAP
system. The purpose of this is to neutralize any pre-exisng
odors from detergents and to remove any residue from
manufacturing that could react with the acvated oxygen.
Use the pre-wash in your sink with water, like you would with
ordinary dish soap.
Use 1/4 of the included
pre-wash bole with a gallon of water to wash your CPAP
equipment (mask, hose, and reservoir), and then rinse
thoroughly.
What’s Inside / Using the Neutralizing Pre-Wash
6 Installing the Injecon Fing
Installing the Injecon Fing
machine. Posion the injecon
ng onto the port of your
reservoir, allowing the smaller
hose to enter into and rest on
or near the boom of the reser-
voir.
If you
experience diculty inserng
the small hose into the reservoir,
please visit
to see how
this can be done with a number
of dierent style humidiers.
If you are currently not using a
humidier, remove this short
length of hose by pulling it
straight o, then aach the
ng directly to the port on
your CPAP machine. (see next
page)
Installing the Injecon Fing, Acrylic Sleeve, and Check Valve 7
Installing the Injecon Fing, Acrylic Sleeve, and Check Valve
Reconnect the main CPAP hose to the top of the injecon ng.
Separate the face mask hose
from the main hose, and thread
the acrylic sleeve onto the end
of the main hose. Reaach your
face mask hose. When using the
SoClean unit,
Visit
for a video demonstraon of this procedure.
5. SoClean Check Valve
Your SoClean check valve assembly is
a series of two check valves separated
by a short length of clear tube. It is
installed along the length of hose that
connects your SoClean to your CPAP
system. This assembly is important
because it prevents water from your
humidier reservoir from backing up
into your SoClean machine. The clear tube allows you to visually
inspect for water trapped within it. If you can see water in the clear
tube, the check valve assembly should be replaced immediately.
8 SoClean Timer Set-Up
Visit for video
demonstraons on how to set your SoClean mer.
Your SoClean mer will allow you to completely automate your
daily cleaning.
You can increase or decrease that duraon depending upon
your needs. Please allow for your mask to remain inside the
SoClean unit for following the machine’s
operaon, as this is part of the sanizing process.
Hold down the CLOCK buon while
you click through the DAY buon unl
you reach the current day. (i.e. if it’s
Wednesday, the display should show
We at the top)
Hold down the CLOCK buon while
you click through the HOUR buon
unl you reach the current hour. (i.e. if
it’s 10:15 am, the hour display should
read 10)
SoClean Timer Set-Up
12:00 AM – 00:00 hrs
1:00 AM – 01:00 hrs
2:00 AM – 02:00 hrs
3:00 AM – 03:00 hrs
4:00 AM – 04:00 hrs
5:00 AM – 05:00 hrs
6:00 AM – 06:00 hrs
7:00 AM – 07:00 hrs
8:00 AM – 08:00 hrs
9:00 AM – 09:00 hrs
10:00 AM – 10:00 hrs
11:00 AM – 11:00 hrs
12:00 PM – 12:00 hrs
1:00 PM – 13:00 hrs
2:00 PM – 14:00 hrs
3:00 PM – 15:00 hrs
4:00 PM – 16:00 hrs
5:00 PM – 17:00 hrs
6:00 PM – 18:00 hrs
7:00 PM – 19:00 hrs
8:00 PM – 20:00 hrs
9:00 PM – 21:00 hrs
10:00 PM – 22:00 hrs
11:00 PM – 23:00 hrs
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
SoClean Timer Set-Up 9
Hold down the CLOCK buon while
you click through the MIN buon unl
you reach the current minutes. (i.e.
if it’s 10:15 am, the minute display
should read 15)
Press the TIMER buon. You should
see the number 1 and the word ON at
the le of the display. This means the
machine is ready to be programmed
as to what me it will turn on. If you
wait too long, the mer will revert
back to the clock display, and you will
have to press TIMER again to resume
programming.
Click through the DAY buon to select
the day, or combinaon of days,
you want to run your SoClean. For
instance, if you want to run it daily,
the top display should show all 7 days.
Click through the HOUR buon to
select the hour of the day you want
your SoClean to turn on. Most people
choose mid-morning or 1-2 hours aer
they awake.
SoClean Timer Set-Up
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
ON
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
ON
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
ON
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
10 SoClean Timer Set-Up
SoClean Timer Set-Up
If you would like to set the minutes,
click through the MIN buon unl
you reach the minutes of the hour
you want your SoClean to turn on.
Aer compleng the sengs to turn
on your SoClean, press the TIMER
buon once again. This me you
should see the word OFF next to the
number 1, at the boom le of the
display. This means the machine is
ready to be programmed as to what
me it will turn o.
Click through the DAY buon to
select the day or combinaon of
days that match what you selected
earlier, when you programmed the
mer to turn on.
Click through the HOUR buon unl
you reach the hour you’d like your
SoClean to turn o. (This should
usually match the hour you chose to
turn your SoClean on.)
ON
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
OFF
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
OFF
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
OFF
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
SoClean Timer Set-Up 11
SoClean Timer Set-Up
Click through the MIN buon unl the
number goes 5 - 15 minutes beyond
the me you selected to turn the
machine on. (i.e. if your machine is set
to turn on at 10:15, it should be set to
turn o at 10:20)
Aer seng your mer, press the CLOCK buon once to return
to the home screen, or you can wait a few moments and it
will return automacally. At this point, your SoClean has been
programmed to turn on and o automacally.
The last thing to do, is to make sure that there is a bar above
the word AUTO on your mer. If this isn’t the case, press the
MANUAL buon unl it moves into the correct posion. Note:
Regardless of your sengs, your SoClean will not operate
unless there is a mask/hose present in its chamber.
There may be occasions when you wish to run your SoClean at
a me other than what you’ve programmed into your mer.
(Perhaps you forgot to place your mask into the chamber that
morning, but would sll like to sanize your equipment later
that day.) You can do this without having to reset the mer, by
using the manual seng.
To do this, simply push the MANUAL
buon unl the bar on the boom
of your display moves to the posion
above the word ON. Now place
your mask and aached hose into
the chamber and close the lid. At
this point, the SoClean will operate
connuously.
OFF
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
12 SoClean Timer Set-Up
SoClean Timer Set-Up
DAY
HOUR
MIN
TIMER
CLOCK
ON AUTO OFF
MANUAL
ON P
Aer
the desired amount of me, open the lid,
press the MANUAL buon once
,
and re-close the lid. Since acvated
oxygen is heavier than the air we breathe,
it will remain in the chamber while you
perform this. Please allow for the mask
to remain inside the SoClean unit for at
least 2 hours following the machine operaon, as this is part of the
sanizing process.
Using Your SoClean 13
Using Your SoClean
Aer your inial setup, using your SoClean unit is extremely easy.
You will not need to disassemble any components to carry out
your daily sanizing.
1. Open lid.
Note: you can run SoClean
with or without water in your
reservoir. Also you can use the
SoClean without a reservoir
completely. Please see Secon 3.
2. Insert mask with hose
aached into chamber, and
close lid. Be sure the acrylic
sleeve is posioned in its
slot, forming a ght seal.
Close latch.
3. SoClean is now ready to automacally operate according
to its preset me and duraon.
Please allow for the mask to remain inside the
SoClean unit for at least 2 hours following the machine
operaon, as this is part of the sanizing process.
4. Before normal use, turn on your CPAP machine and allow
it to operate approximately 15 - 20 seconds, to allow any
residual sanizing scent to be blown out.
It’s no coincidence that the clean odor you smell in connecon with
the SoClean machine is reminiscent of the way the air smells aer
a thunderstorm. The same process is at work: Acvated oxygen is
being generated.
The acvated oxygen used in the SoClean process is one of nature’s
most potent sanizing agents. It has the ability to kill bacteria,
molds, viruses, and fungi on contact. It then reverts back into the
oxygen we breathe by the end of the sanizing process.
14 FAQ & Troubleshoong
No. The SoClean uses no uids in its operaon. It sanizes with gaseous acvated
oxygen. No harsh uids or water are used in this process.
No. The powerful sanizing agent used by the SoClean never reaches the outside
environment. It is generated and contained safely within the SoClean system, and is
converted back into the air we breathe when it is released.
Aer sanizing, your equipment will carry a light, clean scent. Some have described
it as a mild bleach odor. This scent indicates that your equipment has been
sanized.
If you have already treated your equipment with the Neutralizing Pre-Wash, and sll
feel that the scent is too strong, there are a number of things you can do: (1) Before
donning your mask at bedme, run your CPAP for 20 seconds to allow any residual
scent to be expelled. (2) Set the mer so that treatments take place earlier in the
day, allowing any residual scent to dissipate by nighme. (3) Reduce the treatment
duraon me. Using your SoClean manual, you can cut back to as lile as 5 minutes
and sll receive eecve sanizing. (4) Sanize your equipment every other day
instead of daily.
Five to ten minutes should be enough to completely sanize your equipment.
Anything beyond that is likely unnecessary. The SoClean should never be set to run
for longer than 30 minutes, with at least a 30 minute cool-down.
Nylon and natural rubber break down when exposed to acvated oxygen.
Mainstream manufacturers typically do not use these materials in their reservoirs,
hoses, or headgear.
FAQ & Troubleshoong
SoClean Warranty 15
SoClean Warranty
Inceptus, Inc. (DBA Beer Rest Soluons) warrants this product under a one (1) year
limited warranty for defects in manufacture or workmanship.
For all warranty issues, a Return Authorizaon number and Proof of Purchase is
required, please contact Beer Rest Soluons at www.beerrestsoluons.com.
The return shipping cost is the responsibility of the customer; therefore, returned
products must be shipped prepaid and insured. CODs are not accepted. Original
shipping fees are non-refundable. Products repaired or replaced under warranty will
not incur reshipping charges. Under this warranty, the sole remedy shall be repair,
exchange, or replacement at Beer Rest Soluons discreon.
This warranty does not cover any charges for labor, downme, or any other
consequenal or incidental damages resulng from the sale, use or improper
funconing of the product. The warranty does not cover product failures due to
misuse, abuse, improper maintenance, normal wear and tear, typical required
periodic replacement products, or circumstances beyond the control of Beer Rest
Soluons.
BETTER REST SOLUTIONS SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT.
EVERY EFFORT HAS BEEN MADE TO INSURE THE COMPLETE ACCURACY OF THE
CONTENTS OF THIS MANUAL. NO LIABILITY ARISING FROM ITS USE, HOWEVER,
CAN BE ACCEPTED BY THE COMPANY, WHO RESERVES THE RIGHT, WITHOUT PRIOR
NOTICE, TO ALTER THE SPECIFICATIONS, CONSTRUCTION, OR CONTENT OF ITS
EQUIPMENT AT THE COMPANY’S OWN DISCRETION.
This product or statements have not been evaluated or endorsed by the Federal
Food and Drug Administraon. This product and publicaon is not intended to diagnose, treat, cure or
prevent any disease or medical condion. It is not intended to be a substute for informed medical advice
or care. Always consult a physician before beginning therapy of any kind, especially if pregnant or nursing.
The informaon provided herein should not be construed as health-care diagnosis, treatment regimen or
any other prescribed health-care advice or instrucon. You should consult your health care professional
for individual guidance for specic health problems. Persons with serious medical condions should
seek professional care. Pregnant women should consult with their health-care professional before using
this product. No medical claims are intended or implied in conjuncon with the sale of this product. The
purchaser accepts full responsibility for the safe and proper use of this product. The degree of benets
derived from the use of this product may vary with each individual. No acon should be taken based solely
on the content of this informaon provided herein.
Copyright © 2011-2013 www.beerrestsoluons.com
is a division of Inceptus, Inc.
SoCleanTM is a trademark of Inceptus, Inc.
Uxbridge, MA 01569-2001
Edion 08/12/13
EDUCATIONAL USER GUIDE & INSTRUCTION BOOKLET
Table of contents
