Panasonic TYTP10E User manual

Operating Instructions
Electronic Pen for Plasma TV
Model No.
TY-TP10U
ENGLISH
FRANÇAIS
ESPAÑOL
TQZJ489
TY-TP10W
TY-TP10E

ENGLISH
2
Thank you for purchasing a Panasonic
product.
Before operating this product, please read the instructions
carefully, and save this manual for future use.
Before using this product, be sure to read “Safety Precautions”
and “Using Precautions” ( pages 2 - 6).
Safety Precautions
Warning
Heating
 Do not dispose of Electronic Pen in fire, expose to
heat or leave in places that can get hot.
Place
 Do not use Electronic Pen in hospital or other medical
facilities.
Radio waves from Electronic Pen may cause interference of medical
equipments.
 Do not use Electronic Pen nearby automatic control
equipments, like a automatic door, a fire alarm
apparatus, etc.
Radio waves from Electronic Pen may cause interference of automatic
control equipments.
 Keep Electronic Pen more than 22 cm (9 in.) away
from the implant of cardiac pacemaker, or similar
implantable medical equipments, at all times.
Radio waves from Electronic Pen may affect implantable cardiac
pacemaker or similar equipment operations.
Accidental Ingestion
 Keep Electronic Pen parts in places out of the reach of
children.
There is a danger small children could swallow such parts by mistake.
• If a child accidentally swallows such parts, seek immediate medical
attention.

ENGLISH
3
Disassembly
 Do not disassemble or modify the Electronic Pen.
Surface temperature of panel
 The TV may be hot. Do not touch it continuously.
Caution
AAA Battery
 Keep the AAA battery in places out of the reach of
children. Accidentally swallowing them adversely
affect bodies.
• If a child accidentally swallows such parts, immediately seek medical
advice.
 Incorrect installation may cause battery leakage,
corrosion and explosion.
• Replace only with the same or equivalent type.
• Do not use the rechargeable battery ( Ni-Cd, etc.).
• Do not the burn or break up battery.
• Do not the expose battery to excessive heat such as sunshine, fire or
the like.
• Make sure you dispose of the battery correctly.
Electronic Pen
 Handle the Electronic Pen carefully and store in a
case when not in use.
Failure to do so may damage Electronic Pen, which may result in injury.
 Always keep the Electronic Pen in a cool, dry place.
Failure to do so may cause fire or electric shock.
 Do not use continuously for a long period of time.
Taking a rest for 10 to 15 minutes every one hour is recommended.
Falling of TV/Panel scratch
 Do not forcibly hit or pick the TV screen with the
Electronic Pen.
Falling of TV may cause injury or scratch of the screen.
(continued overleaf)

ENGLISH
4
FCC STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the Panasonic Service Center or an experienced radio/
TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached
installation instructions and use only shielded interface
cable with ferrite core when connecting to computer or
peripheral devices. Any changes or modifications not
expressly approved by Panasonic Corp. of North America
could void the user’s authority to operate this device.
FCC Declaration of Conformity
Models: TY-TP10U/TY-TP10E/TY-TP10W
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Marketing Company of North
America
1-877-95-VIERA (958-4372)
email: [email protected]
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CANADIAN NOTICE:
For Model TY-TP10U/TY-TP10E/TY-TP10W
This Class B digital apparatus complies with Canadian ICES-003.

ENGLISH
5
Using Precautions
Cautions during viewing
Do not use devices that emit strong electromagnetic waves
(such as cellular phones or personal transceivers) near the
Electronic Pen. Doing so may cause the Electronic Pen to
malfunction.
The Electronic Pen cannot operate fully at high or low
temperatures. Please use within the specified usage
temperature range ( page 12).
For comfortable viewing
Stop using the Electronic Pen immediately if your skin feels
unusual.
In rare cases, the paint or materials used in the Electronic
Pen may cause an allergic reaction.
Stop using the Electronic Pen immediately if you
experience any redness, pain, or itching.
Prolonged use may cause such symptoms due to excess
pressure, which may result in the user feeling unwell.
Use in area of Bluetooth®signals from other devices may
interfere with Electronic Pen operation.
Using radio waves
This unit uses the 2.4 GHz radio frequency ISM band
(Bluetooth®). However other wireless equipment may use the
same frequency. Be sure to take note of the following to prevent
radio wave interference from other equipment.
 Restriction of use
For use only in your country.
 Range of use
The range of use is up to approximately 3.2 m (10.5 ft.). The range may
be less depending on the structure of the building, the environment and
any obstacles between the receiver and the transmitter. Such obstacles
as reinforced concrete walls and metal doors, in particular, obstruct the
transmitter’s signals.
 Interference from other equipment
Due to radio interference, malfunctions may occur if the unit is placed
too close to other equipment. We recommend keeping the unit as far
away as possible from the following devices:
Bluetooth®devices other than this unit, wireless LAN, microwaves, office
automation devices, digital cordless telephones and other electronic
devices.
The unit is designed to automatically avoid radio interference from these
household devices. However malfunctions may happen when radio
interference occurs.
(continued overleaf)

ENGLISH
6
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry
Canada (IC) radio frequency exposure limits.
Accessories
Bluetooth adapter ·······················································<1>
(XXXX)
AAA battery,R03 battery·············································<1>
< > indicates the quantity.
Identifying Controls
Indicator lamp
Power button
Power button
ON/OFF
Press the button once to turn the power on.
Pressing the button approx. 2 seconds or longer
while the power is on will turn the power off.
This is also used when registering the
Electronic Pen on the television. For details
on registration, refer to the Registration page.
(page 8)
Indicator lamp
Lights or flashes while using or charging to indicate the status of
battery level and Electronic Pen.
• Lights for approx. 2 seconds when turned on, and then blinks
at approx 2-second intervals.
Blinks in red in Electronic Pen 1 operation, and green in
Electronic Pen 2 operation.
• Continuously blinks in red and green alternately during registration.
• Lights intermittently in red and green alternately at approx.
2-second intervals during reconnection.
• Blinks in green for approx. 3 seconds when registration or
reconnection is complete.
• Blinks 5 times consecutively at power-on when the battery
level is low.

ENGLISH
7
Inserting the battery
When the battery level is low, the indicator lamp blinks 5 times
when the Electronic Pen is turned on.
(Replacing the battery at an early stage is recommended.)
1. Turn the tip of the Electronic Pen to open the cover.
2. Insert the battery, and turn the tip of the Electronic Pen to
close the cover.
Close the cover securely
NOTE
• Use the specified battery (AAA alkaline battery or AAA
manganese battery).
• Do not reverse the polarity (positive and negative) of the
battery when inserting.
• Dispose of the used battery as an incombustible waste or
according to the regulations in your area. The battery cover
can be opened only up to the point where the battery is
placed. Do not forcibly try to open further than that.

ENGLISH
8
Registration
Register the Electronic Pen when using it for the first time after
purchase.
Registration is required every time the TV is changed.
1. Turn the TV on to start registration of the Electronic Pen.
• For how to start registration of the Electronic Pen, see the
operating instructions of the TV.
2. Press the power button for 5 seconds or longer with
the Electronic Pen turned off. Registration starts for the
Electronic Pen with the TV.
(No need to press down the power button continuously at the
first-time registration after purchase.)
• The indicator lamp blinks in red and green alternately
during registration.
• Place the Electronic Pen within the distance of 50 cm
during registration.
3. Registration is complete when the indicator lamp blinks in
green for approx. 3 seconds.
• After registration, when the Electronic Pen is turned on
near the TV that is already on, it will be automatically
reconnected to the TV.
How to hold the
Electronic Pen
Hold the Electronic Pen as shown in the figure.
Hold the center of the Electronic Pen.
Press the Electronic Pen vertically to the TV screen.

ENGLISH
9
Attaching the Bluetooth adaptor
Attaching the Bluetooth adaptor is required when using the
Electronic Pen with a TV which is not equipped with the
Bluetooth®communication function.
1. Insert the connector of the Bluetooth adaptor to the USB
terminal on the TV.
2. Using a two-sided tape, attach the Bluetooth adaptor to the
position on the TV shown in the figure.
USB connector
Bluetooth adaptor
Two-sided tape
Bluetooth adaptor

ENGLISH
10
Storage and Cleaning
Clean using a soft, dry cloth.
Wiping the Electronic Pen with a soft cloth that is covered in
dust or dirt may scratch the eyewear. Shake off any dust from
the cloth before use.
Do not use benzene, thinner, or wax on the Electronic Pen, as
doing so may cause the paint to peel off.
Do not dunk the Electronic Pen in liquid such as water when
cleaning.
Avoid storing the Electronic Pen in hot or highly humid
locations.
Remove soil stuck to the pen tip with a cotton swab, etc. Be
careful not to subject the pen tip to impact since it is equipped
with the sensor.
Disposal
A battery is built in to the Electronic Pen. Please discard
according to local regulations.
Do not disassemble this product.
Danger
As the battery is specifically for this product, do not
use it for any other device.
Do not charge the removed battery.
Do not throw the battery in a fire, or apply heat to it.
Do not pierce the battery with a nail, subject it to an impact,
or dismantle or modify it.
Do not let the wires touch any other metal or each other.
Do not carry or store the battery with a necklace, hair pin,
or the like.
Do not charge, use, or leave the battery in a hot location
such as near a fire or under the hot sun.
Doing so may cause the battery to generate heat, ignite, or rupture.