Beyonwiz DP-P2 User manual

Welcome Message
i
Welcome Message
Thank you for choosing a DP-P2, the High Definition Digital TV Recorder.
The DP-P2 supports the true dual-tuner PVR features for the broadcasting programs in HD (MPEG2 1080i).
And you can now pause, rewind and record the pay TV with the line-input. You don’t need any tape or DVD for recording.
The DP-P2 supports the IceTV Interactive so that you can schedule programs from your PC or mobile phone.
The DP-P2 also supports all the ways of watching the multimedia content with your PC and Internet;
The USB ports and the networking feature combining with DivX playback, you can play any multimedia content with no external device.
With a DP-P2, you don’t have to bring your PC to your living room any more. And you will share valuable time and experience with your family.
To enjoy all the new features of the DP-P2, please make sure that the latest firmware is installed on
your system. In the new firmware, new features which are not described in this manual can be added
and some features described in this manual can be altered or removed for the best performance and
users’ experiences.
Please visit our website, www.beyonwiz.com.au, to get new information of the firmware and features.

Precaution
ii
Precaution
Read this manual carefully before using this product. The cautions
described below contain important information about safety, and are
categorized into: Danger, Warning and Notice. The company will not be
responsible for accidents or damage resulting from careless handling by
the user.
DANGER
If the user mishandles the product, there is loss of life risk or
critical injury.
z Connect the power cord only to A/C outlets as specified by the user
manual or product specification. If the power code is connected to a
non-specified A/C outlet, it can result in fire or electric shock.
z The product must not be exposed to water or liquid of any kind, or be
exposed to drips or splashes. It can result in fire or electric shock.
z Do not place heavy objects, including the product itself, on top of the
power cord. If it is damaged, it can result in fire or electric shock.
z Do not place metal objects on top of the apparatus. If metal objects
fall onto the apparatus, it could result in fire or electric shock.
z Do not repair, disassemble or modify this apparatus yourself. It can
cause fire or electric shock. If internal checking or maintenance is
needed, please contact your service center or agency.
z Do not block or cover any ventilation opening. A fire can result from
overheating.
z Turn off and unplug the power as quickly as possible during electric
storms. Failure to do so can result in fire or electric shock.
z Remove the antenna’s power plug from the outlet as quickly as
possible during electric storms. Failure to do so can result in fire or
electric shock.
z Do not drop the apparatus (for example by putting it in a place where
it may fall) or subject it to impact. The product might be damaged. If
it is damaged, please turn off the power and remove the plug from
the power outlet, fire or electric shock may occur.
z Never touch the power cord with wet hands. It can result in an
electric shock.

Precaution
iii
WARNING
If the product is mishandled, the user might receiver a serious
or minor injury. Damage or loss to the user’s property may also
occur.
z The product must not be exposed to water or liquid. If the apparatus
is exposed to drips or splashes, it might cause a problem that may
not be repairable.
z Do not repair, disassemble or modify this apparatus yourself. It can
be seriously damaged, possibly beyond repair.
z Turn off the power and unplug the power cord as quickly as possible
during electric storms. The apparatus may be damaged.
z Remove the antenna’s power plug from the outlet as quickly as
possible during electric storms; otherwise the apparatus might be
damaged.
z Data recorded in the HDD may be lost due to a shock, lightening or
electricity failure. The user must back up his or her own data, and the
company does not take any responsibility for failure to do so.
NOTICE
If the product is mishandled, it might cause minor damage.
z If the apparatus becomes marked, clean it gently with a soft cloth or
towel. Never use chemical solvents such as benzene, thinner, acetone
or other solvents. The surface of the apparatus might become
discoloured and the paint might peel.
z Do not place or keep the apparatus in the following situations. Doing
so might cause problems.
- Where it is too hot or cold.
- Where there is high humidity.
- Where there are excessive temperatures, for example in front of
air-conditioners or heating vents.
- Where there is dust or soot.
- In confined areas where the heat cannot be released.
- Where it is exposed to direct sunlight.
z Turn the apparatus off and unplug the power cord if the unit is to be
unused for a long period of time.
z Do not place heavy objects on top of this apparatus. It might cause
malfunction or damage.
z If the apparatus is so seriously damaged that it cannot be repaired,
or has stopped working altogether, dispose of it properly in
accordance with the local laws or regulations in your area.

Precaution
iv
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
About the internal hard disk drive
The internal hard disk drive (HDD) is a fragile piece of equipment.
Please use the apparatus within the guidelines below to protect against
possible HDD failure or to protect against accidental loss.
z Do not move the apparatus whilst it is on.
z Install and use the apparatus on a stable, level surface.
z Do not block the top ventilation holes.
z Do not use the apparatus in excessively hot or humid places, or in
places that may be subject to sudden changes in temperature.
Sudden changes in temperature can cause condensation to from
inside the apparatus. This can be a cause of HDD failure.
z Whilst the apparatus is switched on, do not unplug it from the wall
socket or switch the electricity off from the circuit breaker.
z Do not move the apparatus immediately after switching it off.
z If there is a power failure whilst the apparatus is on, some data on
the HDD might be lost.
z The HDD is very delicate. If used improperly or in an unsuitable
environment, the HDD may fail after a few years of use. Signs of
problems include playback unexpectedly freezing and noticeable block
noise (mosaic) in the picture. Sometimes there will be no warning
signs of HDD failure. If the HDD fails, no playback of recorded
material will be possible. In this case the HDD needs to be replaced
by a qualified technician.

Precaution
v
Copyright
This manual is protected by copyright laws.
Copy, use, reproduction of this manual in part or whole without beyonwiz's
prior written permission is prohibited.
Disclaimer
The manufacturers, distributors and agents are not liable to any kind of
damage caused by the use of the information contained in this manual.
The instruction and descriptions which this manual contains are based on the
time of this manual's production.
The manufacturer constantly updates it with new functions and technology.
All the specifications are subject to change without prior notice.
Trademarks
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under the license from Dolby Laboratories. "Dolby" and the
"double-D" symbol are trademarks of Dolby Laboratories.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers
Forum, Inc.

Contents
Contents
Welcome Message i
Precaution ii
Contents 2
1. Package Contents 1
2. Introduction 3
1. DP-P2 Highlights 3
2. Front Panel 4
2-1. Buttons 4
2-2. Slot Door 4
2-3. Front Display Window 4
3. Rear Panel 5
4. Remote Control 6
4-1. Operating DP-P2 6
4-2. Operating Other Beyonwiz Products 7
4-3. Operating TV set 8
4-4. Remote Control HEXA Code 10
3. How to Connect 11
1. Connect to TV 11
2. A/V Inputs 12
3. A/V Bypass 12
4. Recommended Configuration 13
4-1. Case 1: Connecting DP-P2 to TV with HDMI 13
4-2. Case 2: Connecting DP-P2 to TV with S-VIDEO 13
5. Antenna Connection 14
6. Ethernet Connection 15
6-1. Connection Using a Network Router 15
6-2. Direct Connection to the PC 16
6-3. Direct Connection to Internet 17
4. Quick Setup 19
1. Start Quick Setup 19
1-1. Quick Setup of Video Output Format 20
1-2. Basic Operation 21
2. Configuration 24
2-1. Time Setting 24
2-2. A/V Output Setting 26
2-3. Service Scan 28
2-4. A/V Input 30
3. Network 31
3-1. Ethernet Setting 31
3-2. Automatic Configuration 32
3-3. Manual Configuration 33
3-4. Ice Guide 34
3-5. WizPNP 35
3-6. Windows Sharing 37

Contents
5. STB & PVR Function 39
1. Basic STB Function 39
1-1. Service Change 39
1-2. Information Box 42
1-3. Volume Level Adjust 43
1-4. Soundtrack Change 43
1-5. Subtitle and Teletext Service 44
1-6. Sleep Timer 45
2. Service Edit 46
2-1. Service List Edit 46
2-2. Favorite Group 47
3. PVR Functions 49
3-1. Time-shifting 49
3-2. A-B Repeat 51
3-3. Bookmark 51
3-4. Instant Recording 53
3-5. Timer 58
3-6. Recording Conflict 62
4. EPG (Electronic Program Guide) 65
4-1. EPG with Multiple Services 65
4-2. EPG with Single Service 66
4-3. Service Change and Recording 67
6. File Playback Function 69
1. Exploring Contents 69
2. Contents Playback 74
2-1. Movie Playback 74
2-2. Music Playback 78
2-3. Photo Playback 79
2-4. Play-list 80
7. File Management 83
1. Rename 83
2. Delete 84
3. Backup to USB Storage 85
4. Backup to PC via Network 88
5. Edit Recording File 89
8. Internet Service 91
9. Advanced Setup 93
1. Miscellaneous 93
1-1. Favorite 94
1-2. OSD 96
1-3. Access Control 98
1-4. Preference 99
2.
Management 102
2-1. F/W Upgrade 102
2-2. HDD 105
2-3. Initialize 108

Contents
10. Troubleshooting Guide 110
Specification a
Warranty Conditions b
WEEE Information c
Contact Beyonwiz d

Package Contents
1
1. Package Contents
The following elements are included in the gift box.
Please check all package contents before using your product.
z DP-P2 z Remote Control (BR-02) z Batteries of
the Remote Control
(AAA size x2)
.
z User Manual z RCA Audio/Video Cable z Component (Y/Pb/Pr) Video Cable z Ethernet Cable

2
This page intentionally left as blank.

Introduction
3
2. Introduction
1. DP-P2 Highlights
World first HD PVR feature
The DP-P2 can record two HD (1080i) programs concurrently while
you enjoy the time-shifting features. It can also pause, rewind and
record a pay TV with the A/V input.
IceTV Interactive support
You can get 7-day the EPG (Electronic Program Guide) from IceTV
(www.icetv.com.au) and schedule programs based on the EPG
information. You can even schedule programs from your PC or mobile
phone.
HD Multimedia player
With USB host ports and networking, the most frequently used ways of
sharing contents, the DP-P2 gives unlimited flexibility to access and play
multimedia content.
Colour Theme on your taste
The DP-P2 provides 10 different colour themes for OSD (On-screen
Display) on your taste.
Dual Tuner DVB-T Compliant with Internal Loop through
Video Output
Composite, S-Video, Component (Y, Pb, Pr), HDMI
Audio Output 2ch RCA for analog audio
(Dolby Digital stereo decoding)
Coaxial and Optical S/PDIF, Digital audio in HDMI
A/V Input* Composite, S-Video
2ch RCA for stereo audio input
Interface 10/100 Ethernet Port
2 USB Host Ports (USB 2.0 Compliant)
Memory Card Slots: SD, CF, MMC and Memory Stick
Multimedia
Playback
Movie: mkv, wmv, avi, mpg, vob, mp4, asf, tp, trp
Music: mp3, wma, aac, ac3
Photo: bmp, jpeg, png
* If you connect other A/V device such as a set-top box for a pay-TV
service to these input ports, you can record or enable time-shifting
functions for the pay-TV service with the DP-P2. Please refer to 3. How
to Connect and get the recommended configurations.

Introduction
4
2. Front Panel
2-1. Buttons
Five buttons are placed on the front panel.
z STANDBY Button: it switches the DP-P2 between the operation and
standby modes.
z CHANNEL Buttons: the top and bottom parts of the circular button
work as the channel-up and channel-down buttons.
z VOLUME Buttons: the left and right parts of the circular button work
as the volume-down and volume-up buttons.
Standby Button
Channel, Volume Buttons
Front Display Window Slot Door
Front Panel
(USB, CF Card, SD/MMC/Memory Stick)
2-2. Slot Door
A slot door is placed on the right side of the front panel. If you open this
door, you can find the following ports;
z USB: you can connect a USB storage device which is compatible to
the USB standard specification.
z CF Card: you can connect a CF-type memory card.
z SD/MMC/Memory Stick: you can connect either SD-type or MMC-type
memory card. You can also connect a Memory Stick.
2-3. Front Display Window
The front display window gives you easy way to check the status of the
DP-P2.

Introduction
5
1 Indicates hard disk space used.
2
Lights when there is no space left on the HDD.
Lights when there is no time information.
3 Lights when a timer recording is programmed in standby mode.
4 Lights when the signal comes out via HDMI.
5 Lights when the signal is High Definition (will be implemented).
6 Indicates the resolution of video output.
7 Lights when the video output is in Progressive Scan mode.
8 Lights when Ethernet connection is set up and enabled.
9 Lights when USB devices or memory cards is connected.
10 Indicates operation mode (TV or Radio).
11 Indicates the current recording status.
12 Lights when Time Shift is enabled.
13
Indicates playback of content with light on the outer circle and
revolving on the inner circle.
14 Indicates the audio format of content.
15
Lights on FR and FL when the audio output is set to stereo.
Lights on all indicators when the audio output is 5.1CH.
No light when the audio output is Pass-through.
3. Rear Panel
1. ANT IN
2. RF LOOP OUT
3. HDMI
4. COXIAL AUDIO
5. OPTICAL AUDIO
6. S-VIDEO*
7. COMPONENT (Y/Pb/Pr)
8. ANALOG A/V OUTPUT*
9. ETHERNET
10. USB
11. ANALOG A/V INPUT**
* These ports can also bypass the external signals connected to the
analog A/V input ports. You can control these ports with the
AV
bypass
button.
** These ports are for connecting other A/V device such as a set-top
box for a pay-TV service.

Introduction
6
4. Remote Control
4-1. Operating DP-P2
In order to operate the DP-P2 with the enclosed remote control, please
select
STB mode by pressing the STB button. The red backlight
beneath the
STB button lights when you press a button in this mode.
The below picture and right table show the function of each button on
the remote control.
1
STANDBY Switch the DP-P2
between Operation and Standby mode.
2 AV bypass
Change the Composite, S-Video and Analog Audio outputs
to
the AV bypass mode
3
STB
Set Remote Control to Work for the DP-P2.
4
T
V/RADIO Change to TV mode or Radio mode.
5
T
V-OUT Change Video Output. (Refer to page 17. for more information)
6
T
V
Control standard TVs with remote control.
7
SETUP Go to SETUP Menu.
8
WizTV Go to Internet Service. (for future use)
9
LIVE
Go to Live TV.
10
File
PLAY Go to File Play.
11
VOL +/- Adjust the volume. (Increase/Decrease)
12
CH +/- Change TV or Radio Service.
13
MUTE
Enable or disable the Audio output.
14
INFO
Show service information.
15
FAV
Show Favorite Service List.
16
GUIDE Show EPG (Electronic Program Guide).
17
POP-UP Show advanced menus
of the current mode.
18
LIST
Show Service List.
19
EXIT
Return to the previous menu or Cancel.
20
UP/DOWN/LEFT/
RIGHT Move the indicator on the menu mode.
21
OK
Select an item on the menu or Confirm.
22
RECALL Recall the previously viewed (or listened) service.
23
RED
Optional function key
24
GREEN Optional function key
25
YELLOW Optional function key
26
BLUE
Optional function key
27
0~9
Numeric buttons.
28
SLEEP Set sleep time of the DP-P2.
29
ZOOM Zoom-in or Zoom-out.
30
PLAY
Play Content.
31
STOP
Stop playback.
32
PAUSE Pause playback.
33
SLOW FWD Slow Forward.
34
REW
Rewind.
35
FF
Fast Forward.
36
PREV
Go to the previous track or file, and continue playing.
37
NEXT
Go to the next track or file, and continue playing.
38
REC
Start recording.
39
SUBTITLE Change Subtitle language.
40
T
ELETEXT Show Teletext.
41
SOUNDTRACK Change Soundtrack language.

Introduction
7
4-2. Operating Other Beyonwiz Products
The enclosed remote control (Product code: BR-02) is designed to
operate the DP-P2 only. To operate other Beyonwiz products of DP-S1,
DP-P1 and DP-H1, which are designed to be operated with a remote
control of BR-01, you have to change its operating mode; please press
and hold the numeric button
1 for 5~6 seconds while pressing the OK
button. The red backlight beneath the
TV button blinks three-times if
the remote control changes its operating mode successfully.
If you want to return the operating mode of the remote control to
operate the DP-P2, please press and hold the numeric button
2 for 5~6
seconds while pressing the
OK button. The red backlight beneath the
TV button blinks three-times if the remote control changes its operating
mode successfully.

Introduction
8
4-3. Operating TV set
The enclosed remote control can also be used to control a TV set
provided by major TV manufacturers. In order to operate a TV with the
enclosed remote control, please select
TV mode by pressing the TV
button. The red backlight beneath the
TV button lights when you press
a button in this mode.
There are two ways to program the remote control to work with your TV,
automatic code search or manual set.
1) Automatic Code Search
Please turn on your TV then press and hold the TV button until the red-
backlight turns on. Please point the remote control at your TV and click
the
UP button. After the red-backlight of the TV button blinks, please
wait at least 3 seconds to check your TV turns off or not. If your TV
turns off automatically, your remote control is ready to use for your TV.
If your TV does not turns off, please repeat clicking the
UP button until
your TV turns off. Once your TV turns off after you click the
UP button,
please press the
OK button. The TV button blinks three times to
indicate that the remote control is set.
2) Manual Set
You can set your remote control with 3-digit code manually. Please look
at the following table and find the brand of your TV.
Turn on your TV then press and hold the
TV button until the red-
backlight turns on. Please point the remote control at your TV and enter
the 3-digit code with the
NUMERIC buttons. Wait until the red-
backlight blanks three times. If your TV turns off automatically, your
remote control is ready to use for your TV. If your TV does not turns off,
press the
TV button and enter another code from the table under that
brand.
FUJITSU 208 223 224 218 253
261 286 307 325 329
410 422 423
HITACHI 206 207 208 215 218
229 231 232 236 238
240 244 253 256 286
287 292 298 299 300
301 304 305 306 307
309 3123 314 315 316
317 325 358 367 381
382 383 384 399 405
406 407 410 411

Introduction
9
JVC 207 212 247 264 323
385
LG 208 215 224 229 253
286 307 344 374 385
387 410 412
NEC 205 207 208 215 224
229 248 253 286 389
PANASONIC 208 210 211 212 213
214 216 220 230 236
237 239 242 244 245
255 258 260 278 279
286 307 309 384 410
PIONEER 208 244 246 286 287
307 374 376 380 410
SAMSUNG 205 206 208 209 215
216 218 224 229 253
260 270 277 286 287
296 325 337 374 410
412
SHARP 207 209 230 245 384
SONY 206 207 208 225 230
264 272 285 286 329
424 426 430
THOMSON 208 258 286 345 405
NOTE
z If your TV brand is not listed on above, please visit the following
website to get the correct code if available: www.beyonwiz.com.au.
z Your remote will not always be compatible with all branded televisions.
If this remote doesn’t work or no code exists, please obtain the
original remote from the manufacture of your TV.

Introduction
10
4-4. Remote Control HEXA Code
The below picture and right table inform you to set your own remote
control to operate the DP-P2. The coding system used for the DP-P2 is
the NEC type.
1
STANDBY 0xBE010AF5
2
AV bypass 0xBE0140BF
3
STB N/A
4
TV/RADIO 0xBE0155AA
5
TV-OUT 0xBE0142BD
6
TV N/A
7
SETUP 0xBE0107F8
8
WizTV 0xBE0152AD
9
LIVE 0xBE0108F7
10
FILE PLAY 0xBE0144BB
11
VOL +/- 0xBE0102FD 0xBE0103FC
12
CH +/- 0xBE0100FF 0xBE0101FE
13
MUTE 0xBE010CF3
14
INFO 0xBE010DF2
15
FAV 0xBE0109F6
16
GUIDE 0xBE0143BC
17
POP-UP 0xBE011AE5
18
LIST 0xBE014CB3
19
EXIT 0xBE011CE3
20
UP/DOWN/
LEFT/RIGHT 0xBE014EB1 0xBE014FB0 0xBE0153AC 0xBE0154AB
21
OK 0xBE011FE0
22
RECALL 0xBE011EE1
23
RED 0xBE014DB2
24
GREEN 0xBE010DF2
25
YELLOW 0xBE010EF1
26
BLUE 0xBE010FF0
27
0/1/2/3/4/
5/6/7/8/9 0xBE0110EF 0xBE0111EE
0xBE0112ED
0xBE0113EC
0xBE0114EB
0xBE0115EA 0xBE0116E9 0xBE0117E8 0xBE0118E7 0xBE0119E6
28
SLEEP 0xBE011BE4
29
ZOOM 0xBE0150AF
30
PLAY 0xBE014BB4
31
STOP 0xBE014AB5
32
PAUSE 0xBE0146B9
33
SLOW FWD 0xBE0106F9
34
REW 0xBE0145BA
35
FF 0xBE0148B7
36
PREV 0xBE0104FB
37
NEXT 0xBE0105FA
38
REC 0xBE015EA1
39
SUBTITLE 0xBE0147B8
40
TELETEXT 0xBE0151AE
41
SOUNDTRACK 0xBE0149B6

How to Connect
11
3. How to Connect
1. Connect to TV
Depending on your A/V equipment including TV set which you would like
to connect to, there are various ways you can connect the DP-P2 and
A/V equipment. To make the best connections, please refer to the
manual of your TV set, stereo system or other equipment which you
would like to connect to.
To get true HD quality of HD content, we recommend you to connect
your display with a HDMI cable. The HDMI supports standard, enhanced
or high-definition video and multi-channel audio in a single cable.
If your TV set does not support HDMI but has a DVI input, a HDMI to
DVI converter can be purchased separately. (In this case, audio signal
output through the HDMI interface is disabled.)
If you do not have a high definition display, you can connect the DP-P2
and A/V equipment via other connection options.
To connect your DP-P2 to your TV set or display, you have the following
options; the following order of video connection is based on the quality.
z HDMI (the cable can be purchased separately)
z Component (Y/Pb/Pr)
z S-VIDEO (the cable can be purchased separately)
z Composite (VIDEO)
To connect your DP-P2 to your TV or audio system, you have the
following options;
z S/PDIF Digital Audio output (COAXIAL, OPTICAL)
z 2 CH Analog Audio output
NOTE
z The Composite, S-VIDEO and Analog Audio output ports can also
bypass the external signals connected to the analog A/V input ports.
You can control these ports with the
AV bypass button.

How to Connect
12
2. A/V Inputs
The DP-P2 has A/V input ports for connecting other A/V device such as
a set-top box. You can record or enable the time-shifting functions for a
pay-TV service with the DP-P2.
NOTE
z Please refer to Chapter 5. STB & PVR Functions to utilize the time-
shifting functions for the external A/V device.
3. A/V Bypass
In the standby mode, the DP-P2 is designed to bypass the video and
audio signals from the external A/V device connected to the A/V input
ports to TV set through the Composite, S-VIDEO and Analog Audio
output ports. If you do not want to utilize the PVR functions for the
external A/V device, you don’t have to turn on the DP-P2 or re-arrange
the A/V cables.
You can control the operating mode of the Composite, S-VIDEO and
Analog Audio output ports with the
AV bypass button while the DP-P2
is in the operating mode; once the DP-P2 turns on and operates, the
Composite, S-VIDEO and Analog Audio output ports transmit the A/V
signals from the DP-P2 itself. You can change these ports to bypass the
A/V signals from the external A/V device connected to the A/V input
ports, please press the
AV bypass button.