BIANCHI VENDING Gaia Fresh Milk Guide

!
Milk Cleaning
Remove milk container and replace with
the required cleaning solution.
Place a jug in machine to collect
cleaning solution
Press and hold P4, Once held press
button P3 to activate ‘Milk Clean’
Milk Cleaning
The Machine will start a ‘Quick Rinse’
Once complete, you will need to
activate the clean again. Follow the
previous step to activate.
Once the clean is completed, the
machine will ask you to rinse the milk
line. Replace container with fresh water
and repeat the same step.
Once the clean was successfully
completed. the screen should read
‘Choose Product Ready’
Press B4 + B3
Introduce
Water container
Choose Product
Ready
Milk Cleaning
Once all milk tubes are removed lift the
milk frother upwards out from the
support
Turn the Power to the machine ‘OFF’
from the main switch. Then remove the
milk tubes.
Pull milk frother apart and clean/rinse
under warm water.
Bianchi Gaia fresh milk Maintenance

Product Filling
Turn key and open door.
Lift the lid upwards.
Refill products if required.
Remove drip tray, empty and clean.
Remove waste box, empty and clean.
Wipe down machine.
Daily Cleaning
Lift machine lid and press the right hand
‘Maintenance’ button once.
Once ‘Maintenance’ has been selected,
Press the top right hand button ‘P2’
once to perform a ‘Reset’.
Lift machine lid and press the right hand
‘Maintenance’ button again to return
home.
Reset Procedure
Maintenance 91
Wipper Cleaning
Lift and remove the canister and clean
the area behind.
Close the product canister doors.
Remove the wipper bowl, rinse and dry.
Re-install bowl and canisters.
Bianchi Gaia fresh milk Maintenance
Maintenance
Programming
Maintenance
Programming