START International LR4500 User manual

LR
3/11
4270 Airborn Drive
Addison, TX 75001, U.S.A.
Tel [phone]
Fax [phone]
[email protected]
www.STARTinternational.com
instructions
4500
®

2
CONTENTS
Read this user’s manual before use to ensure proper operation.
Keep the manual on hand for reference in case there is a
problem.
About START International ....2
Maintenance ..........................3
Set-up ....................................3
Features .................................3
Specifications .........................3
Notes ......................................3
Legend ...................................4
Exploded View .......................5
Repair Policy ..........................6
Warranty Information .............6
ABOUT START INTERNATIONAL
START International has provided solutions for manufacturing
companies worldwide since 1981. We provide the service and
expertise that are required to ensure that our customers are fitted
with the best equipment for the job. Our company is built on
adding value to production lines and building relationships with
our customers.

5
4
EXPLODED VIEW
5-Guide Disc
4-Main Plate
4A-Main Plate/Base Screw (2 each)
3-Motor
3A-Motor/Main Plate Screw (4 each)
2-Handle
2A-Handle/Cover screw (2 each)
1-Cover
1A-Cover/Main Plate Screw (4 each)
11-Power Inlet
10-Power Switch
9-Speed Switch
8-Base
8A-Feet
7-Core Adaptor
7A-Adaptor/Hub Screw (1 each)
7B-Tensioner Screw (1 each)
6-Take-Up Hub
6A-Hub/Motor Screw (1 each)
Item # Part #
1 LR4500-03
1A LR4500-03-1
2 LR4500-08
2A LR4500-08-1
3 LR4500-06
3A LD50017-1
4 LR4500-02
4A LR4500-02-1
5 LR4500-07
6 LR4500-04
6A LD50012-1
7 LR4500-05
7A LR4500-05-2
7B LR4500-05-1
8 LR4500-01
8A LD50024
9 LR4500-10
10 LR4500-09
11 LD2000-19
Power Supply LD2000-20A
Power Cord LD50018C
LEGEND

63
MAINTENANCE
Turn machine off when not in use. Remove liner material from take-up hub at
approximately 3" in diameter or if motor appears to be straining. Do not operate
machine without covers in place.
Do not operate if inspection reveals a damaged power or sensor cord.
Contact START INTERNATIONAL to determine nature of problem.
Furnish START with the following information:
1. Who the unit was purchased from.
2. Model number and serial number.
3. Date purchased (copy of invoice or packing slip required).
START will issue an RGA (Return Goods Authorization) for repair.
Return machine to START by UPS, insured and prepaid.
START will notify the customer if there is a repair charge.
FEATURES
NOTES
REPAIR POLICY
Slide inner Guide Disc onto Take-up Hub.
Slide Core Adaptor onto Take-up Hub and secure to Hub using set screw.
Place an empty 3" label core onto the Core Adaptor. Adjust tension screw as
needed to secure core onto Adaptor.
Slide outer Guide Disc onto Hub and up against the label core.
Feed the label web from the printer and tape the web to the label core.
Turn the Hub 1-2 turns to remove slack from web.
Turn power switch on to desired wind direction and set speed.
SET-UP INSTRUCTIONS
SPECIFICATIONS
Model # LR4500
Liner Capacity Width .25” to 4.5” (6mm to 114mm)
Roll Capacity 9” (251mm)
Feed Speed Slow/Fast
Core 1.25” & 3” (32mm & 76mm)
Dimensions 11” (L) x 6” (W) x 9.2” (H)
27.9cm (L) x 15.2cm (W) x 23.4cm (H)
Electrical Requirements 12V DC with 90/240V adaptor
START International warrants all parts on LR series label dispensers against
defects in design, materials and workmanship for a period of 360 days. Labor to
replace defective parts will be performed at no charge for the first 120 days after
date of purchase. Warranty does not cover transportation costs.
Our sole obligation under this warranty is limited to repair, replacement or credit
of the purchase price, at our option, for the machines listed above, which do not
perform properly the function for which they were designed.
Warranty repair is contingent upon our examination and determination that
alleged defects have not been caused by misuse, abuse, improper installation or
application, repair, alteration, accident or neglect in use, storage, transportation
or handling.
The above warranty and remedy constitutes Start International’s sole liability
hereunder and are in lieu and exclusive of all other warranties and remedies
expressed, implied, or statutory, including, but not limited to, those of
merchantability and fitness for a particular purpose.
WARRANTY POLICY FOR LR SERIES LABEL REWINDER
• Bidirectional - Forward/Reverse
• Dual speed torque control
• Labels can be wrapped directly onto 1.5” hub
• Works with any printer
• No tools required for adjustment
• Do not drop the rewinder or subject it to heavy shock.
• Turn off machine when not in use.