
2
TECHNICAL DATA
Power
Board power
Vacuum motor
Blowing motor (only on BF291)
Height
Carton
230V ~ 50/60Hz
700w
150w
150w
85/90cm
132x50x25cm
COD.BF091
JOLLY HEATED IRONING BOARD WITH VACUUM MOTOR
COD.BF291
JOLLY HEATED IRONING BOARD WITH VACUUM MOTOR AND
BLOWING MOTOR
Optional
COD.BF075
VACUUM SLEEVING ARM
COD.BF074
HEATED AND VACUUM SLEEVING ARM
CONSUMER NOTICE:
The BIEFFE product you have purchased is subject to Directive 2002/96/EC of the European Par-
liament and the Council of the European Union on waste electrical and electronic equipment
(WEEE) and, in jurisdictions adopting that Directive, is marked as being put on the market after
August 13, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your
local WEEE collection facilities in the disposition of this product and otherwise observe all applica-
ble requirements.
À L'ATTENTION DE L'UTILISATEUR
Le produit BIEFFE que vous avez acheté est soumis à la directive 2002/96/CE du Parlement euro-
péen et du Conseil de l'Union européenne relative aux déchets d'équipements électriques et élec-
troniques (DEEE). Par ailleurs, dans les juridictions adoptant cette directive, il est marqué comme
mis sur le marché après le 13 août 2005. Il ne doit donc pas être jeté avec vos ordures ménagères
courantes (déchets municipaux non triés). Pour vous débarraser de ce produit, veuillez faire appel
à vos services de collecte des DEEE et observer toutes les obligations en vigueur.
KUNDENHINWEIS:
Das von Ihnen gekaufte Produkt von BIEFFE / BRUNNET unterliegt der Richtlinie 2002/96/EG
über Elektro- und Elektronik-Altgeräte (WEEE) des Europäischen Parlaments bzw. des EU-
Ministerrats. Dieses Gerät ist in Ländern, die diese Richtlinie bereits als Gesetz verabschiedet
haben, nicht vor dem 13. August 2005 im Handel erhältlich und sollte nicht im Rahmen des
normalen Hausmülls entsorgt werden. Nutzen Sie bitte zur Entsorgung dieses Geräts die
entsprechenden Rücknahmesysteme in Ihrer Gemeinde und beachten Sie auch alle weiteren
Vorschriften in diesem Kontext.
3
3
INSTALLATION AND OPERATING INSTRUCTION
• Open the ironing board and set the adjustable leg 1 according to the desired height.
Be sure the board is stable and in a safe place.
• Open the steam generator holder 2 and put the steam generato on it.
• Plug in the power cord 3.
• Turn on the power switch 4.
• Operate on the thermostat 5 to regulate the board temperature. Optimal are 50-70
degrees.
• Wait 10 minutes circa until the board reaches the desired temperature.
• To start the vacuum press on the pedal 6.
• In the model JOLLY COD.BF291 there is a second pedal to control a blowing motor .
To start the blowing press on the pedal.
• Do not put too heavy clothes on the holder 7.
• At the end of the working session, turn off the power switch and unplug the power
cord. Close the board and put it in a safe and dry place.
Legenda
1 Adjustable leg
2 Steam generator holder
3 Power cord
4 Power switch
5 Thermostat
6 Vacuum (and blowing)
pedal
7 Cloth holder
1
2
3
4
5
6
7