BIERDORF PULLEY SYSTEM GYM User manual

1. To ensure your safety, please read the following notes before using this product.
2. Please read, study and understand the instructions and all warning labels before
use.
3. It is recommended to be familiar with the normal operation and usage of the
apparatus before using this product. Relevant information is available on this
instruction sheet as well as at local retailers. Be sure to keep this specification and
ensure that all warning labels are clear andcomplete.
4. This product is recommended for installation by more than twopeople.
5. Ask doctor for advice before you start exercising.
6. Ask you to regularly check any signs of wear of the wire rope, if there is wear may
cause some danger to you.
7. Please keep your hands, limbs and clothes stretch so that you can fully and safely
use this device.
8. Note any possible signs of mechanical occurrence, including part wear, hardware
loosening, and welding cracks. If any of the above signs immediately stop using this
device and contact our after-sales service department. You can use a wrench to
complete the assembly.
9. The user of this product shall not exceed 200 pounds weight.
10. The right of final interpretation of the product is vested in the Company without
prior notice of the change.
ＢＩＥＲＤＯＲＦ

（Please refer to the picture above to install）
1. Run #6 through #8, then use #11 to lock one end of #6; (Please adjust
the length of #6 to a proper position before locking). Please refer to the
following picture for detailed adjustment steps.
2. Fix #7 to a relatively sturdy bar in the home, and then use #12 to
connect #7 and #11.
3. Use #12 to connect #8 and #3 (put the configuration on #3 before
connecting)
4. Use the #12 to connect the other end of #6 and #5 or #4.
ＢＩＥＲＤＯＲＦ

ＢＩＥＲＤＯＲＦ

ＢＩＥＲＤＯＲＦ