Big Lots Lit SLIDING PENGUINS Quick guide

Lit SLIDING PENGUINS
Operating and Safety Instructions
- FOR INDOOR AND OUTDOOR USE –

PARTS:
Part
Description
Illustration
Qty
A
Support Rod
1
B
Upper Slide
1
C
Lower Slide
1
D
Penguin A
1
E
Wings A
2
F
Hat
1
G
Penguin B
1
H
Wings B
2
I
Plastic Ties
8
J
Ground Stake
4
TOAssemble
1. Remove all of the parts from the box carefully and lay out the components.

2. Insert the metal hooks of the Upper Slide (B) into the corresponding rings on the
Lower Slide (C).
3. Insert the metal hooks of the Support Rod (A) into the corresponding rings on the
Upper Slide (B), and insert the prong of the triangle support rod on the Lower Slide (C)
into the ring which located in the middle of the Support Rod (A).
4. Insert the prongs of the PenguinA (D) and the Penguin B (G) into the corresponding
rings on the assembled slide.

5. Insert the prongs of the Wings A (E) and Hat (F) into the corresponding rings on the
PenguinA (D). Insert the prongs of the Wings B (H) into the corresponding rings on
the Penguin B (G).

6. Secure the installing points with plastic ties and secure the base to the soft ground by
fully inserting 4 stakes into the ground.
To Use
1. To illuminate, plug the power cords into a standard 120-volt AC electrical outlet.
2. To shut off, unplug the power cord from the outlet.
WARNING: To reduce the risk of fire or electric shock, if one or more bulbs do not
illuminate, replace the bulb(s) according to the "User Servicing Instructions" section of the
included "Important Safety Instructions" sheet.
Distributed By:
Big Lots Stores,Inc.
PO Box 28523
Columbus,OH 43228-0523