Terra TerraCity QUINTUS SET User manual

i
QUINTUS SET
ASSEMBLY INSTRUCTIONS
Gianto Classic 80 / 95 / 120
COMPATIBILITY

37x 37x74x 37x
Leg
2 x
Pointed
1 x
Pointed
1 x
Quarter
4 x
Bracket
13 x
Seat
1 x
1
5
6
3
2
4
QUINTUS SET
ASSEMBLY INSTRUCTIONS WWW.TERRACITY.EU | [e-mail] | [phone]
ELEMENTS

STEP 1
STEP 2
Place all elements on a
at, protected surface
according to the dia-
gram.
Screw the leg (element
1) to the element 3 with
two bolts, put on the
nuts and tighten. Do not
use too much force to
avoid damaging the fa-
stening bolts.
4
35
66
66
QUINTUS SET
ASSEMBLY INSTRUCTIONS WWW.TERRACITY.EU | [e-mail] | [phone]
DIAGRAM

STEP 4
STEP 5
STEP 3
Connect all the individual
elements together (in the
order 3-6-6-4-6-6-5) in
the same way as in step 3.
Screw the leg (element 1)
to the element 5 with two
bolts, put on the nuts and
tighten.
In the place where elements
3 and 6 are connected, pla-
ce two brackets (element 2),
one on the edge of each seat
and connect them with bolts
(three xing holes at the
seat, two holes halfway up
the supports), put the wa-
sher and nut on the thread
and then tighten.
QUINTUS SET
ASSEMBLY INSTRUCTIONS WWW.TERRACITY.EU | [e-mail] | [phone]

STEP 7
STEP 6
Put the Wave bench on its
feet. That’s it! Now you can
sit back.
Check if all screws are
properly tightened, t
the plugs where they are
needed.
QUINTUS SET
ASSEMBLY INSTRUCTIONS WWW.TERRACITY.EU | [e-mail] | [phone]

www.terracity.eu