DTY Eucalyptus OF-1009 User manual

Eucalyptus Stacking Arm Chair OF-1009
www.DTYStore.com
Page 1 of 6
Eucalyptus Stacking Arm Chair
Item No. OF-1009
Made in Vietnam
For assistance with assembly, please contact DTYStore.com Customer Satisfaction Center
866-217-8155 . [email protected]

Eucalyptus Stacking Arm Chair OF-1009
www.DTYStore.com
Page 2 of 6
Pre-Assembly Instructions
Read all instructions carefully before assembly.
Find a smooth clean area in which to work to avoid damaging your item.
Check that all parts and hardware from the lists are present.
Lay out parts in alphabetical order and hardware in numerical order to make them easier to find when you
are ready to assemble
Wait to dispose of packing material until assembly is complete to avoid accidentally disposing of small parts
or hardware
Tools required: Hex wrench (included) Phillips screwdriver (not included)
Please use caution and care when lifting the product to avoid injury
For ease of assembly two people are recommended
Parts List:
A. Right Armrest/Front Leg
Qty: 1
B. Right Back Leg Qty: 1
C. Left Armrest/Front Leg Qty: 1
D. Left Back Leg Qty: 1
E. Back Qty: 1
F. Seat Qty: 1
(front board is wider than the back board)

Eucalyptus Stacking Arm Chair OF-1009
www.DTYStore.com
Page 3 of 6
Hardware List:
1. Bolt Qty: 2
2. Long Hex Screw (90mm
long) Qty: 2
3. Medium Hex Screw
(60mm long) Qty: 6
4. Long Flat-Head
Screw (30mm long)
Qty: 4
5. Short Hex Screw
(35mm long) Qty: 4
6. Short Flat-Head Screw
(15mm long) Qty: 8
7. Left Brace Qty: 1
Holes are
counter-bored on this side
8. Right Brace
Qty: 1
9. L-Bracket Qty: 2
10. Rubber Pads Qty: 4
11. Hex Wrench Qty: 1

Eucalyptus Stacking Arm Chair OF-1009
www.DTYStore.com
Page 4 of 6
Assembly Instructions:
Step 1
Note: Wait to fully tighten the fasteners until
the end of Step 2.
Use a Bolt (1) to loosely attach the Right
Armrest/Front Leg (A) to the Right Back
Leg (B).
Repeat with the Left Armrest/Front Leg (C)
and the Left Back Leg (D).
Item
Drawing
Qty
1
2
Step 2
To help orient the Seat (F), notice the
front of the Seat is wider than the
back of the Seat.
Use a Long Hex Screw (2) to loosely
attach the Seat (F) to the Right Front
Leg, and a Short Hex Screw (3) to
secure to the Back Leg (B).
Use two Short Hex Screws (3) to
loosely attach the Back (E) to the
Right Leg (B).
In the same way, attach the Seat and
Back to the Left Front Leg (C) and
the Left Back Leg (D).
Tighten all eight Hex Screws and two
Bolts with the Hex Wrench (11).
Item
Drawing
Qty
2
2
3
6

Eucalyptus Stacking Arm Chair OF-1009
www.DTYStore.com
Page 5 of 6
Step 3
a. Use two Long Flat-Head Screws (4) to loosely attach the Left Brace (7) to the inside of the Left front
leg.
b. Use two Short Hex Screws (5) to loosely attach the Left Brace (7) to theSeat.
c. In the same way attach the Right Brace (8).
After all Screws are inserted, fully tighten all Screws.
b
a
c
Use eight Short Flat-Head Screws (6)
to attach the two metal L-Brackets (9) to
the underside of the Seat and Back Legs.
Step 4
Peel and stick the Rubber Pads (10) on each L-Bracket (9). They will protect
the seat of the chairs when they are stacked.
Post-Assembly Instructions:
Remove cushions before stacking.
Caution: Do not stand on chairs. Do not tilt a chair on two legs while sitting in the chair.
Periodically check the fasteners to be sure they remain tight.
Item
Drawing
Qty
4
4
5
4
6
8
Item
Drawing
Qty
1
0
10
4

Eucalyptus Stacking Arm Chair OF-1009
www.DTYStore.com
Page 6 of 6
Outdoor Furniture Care Instruction:
With the proper care your premium eucalyptus furniture will last up to 25 years or more. For unfinished
furniture, we suggest lightly sanding the surface of the furniture with 150 or 180 grit sandpaper once a year to
remove any fuzziness and any larger splinter causing fibers that occur due to exposure to the elements. Be
sure to sand lightly to retain the natural patina. Furniture with an oil finish should also be treated yearly with a
light coat of wood oil designed for eucalyptus or teak by applying it with a soft cloth. For finished furniture, we
recommend brushing off any loose dirt or debris with a soft brush and wiping down with a mild detergent and
water. We recommend you protect your furniture in the off season by using a using a good quality furniture
cover. It helps keep your furniture clean and protects it from the elements thus minimizing annual
maintenance.