BigTimeClocks XL-124W User manual

EZCLOCKS LLC.,
8565 S Eastern ave, Suite 150, Las Vegas NV 89123
Tel: [phone]
www.bigtimeclocks.biz
TIME OF DAY (GPS Satellite)
DATE
TEMPERATURE
COUNTDOWN / COUNT UP
MODEL XL-124WMODEL XL-124W
2022 Instructions manual2022 Instructions manual

What’s in the box
1. Overview
BigTimeClocks®model XL-124W is a 12” numeral / 4 digit outdoor waterproof, IP65 rated, clock which
displays satellite time in hours and minutes. The clock features an external GPS antenna and a temperature
probe that connect to the clock and allow to display time, date and temperature in a rotating format.
Model XL-124W is operated only with the supplied remote control model REM-XL124W (spare remote
controls are available on demand. Please contact Customer Service- see page 5 for contact details).
1x1x
1
BigTimeClocks®
1xGPS Antenna 1xTemperature probe 4xMounting brackets
RF remote control
Waterproof lead 1xDigital clock
Figure 1
Clock dimensions
37.8”
12”
27.55”
2.5”

NOTE: Model XL-124W is a plug-in digital clock. A small battery is included in the
clock for backup purposes in order to maintain clock functions in the background. The
battery will however not illuminate the display. The clock synchronize with the satellite
when power resumes. Model XL-124W is exclusively operated with the Radio Frequency
remote control supplied wih the clock.
2
BigTimeClocks®
Press “Set” on your remote control. The digits will start to blink. Your will rst be prompted to enter the
year. Press “Set” again and enter the date. Press “Set” again and you will entre the time zone screen:
in this screen please enter your time zone in reference to GMT (Greenwich Mean Time). For example US
East coast time is GMT-6 and US Pacic time is GMT-9. To make the negative symbol appear on the left
of the display, please use the down arrow on your remote and navigate to the desired value. Press “Set”
to save and exit the setting mode.
The XL-124W will synchonrize with the satellite within 1-5 minutes.
The XL-124W can easily be adjusted to daylight savings time by pressing the “DST” button featured on
the remote control.
2. Setup
2.1 Setting Time of day, date and temperature
When the clock is powered up, If the remote does not immediately connect to the clock, press the SET
and R buttons at the same time for 15s.
2.2 Pairing the remote control
3. Functions
3.1 Time of day, date and temperature
The XL-124W pulls its data from the GPS satellite and synchronizes multiple times throughout the day
providing the highest level of accuracy for your time content, and matching other connected devices
such as phones, tablets or computers. In case of a power loss, the clock will retain memory settings (time
zone, year and date) and will immediately synchronize with the satellite when power resumes.
Note: Pressing the “DST” button on the remote control will automatically adjust time displayed to
refect the +/-1 hr time change.

3
BigTimeClocks®
BigTimeClocks® model XL-124W oers 2 countdown options: hours/minutes or minutes/seconds.
3.2.1 Countdown in hours & minutes
3.2 Countdown
3.3 Count up
To show time of day only on your screen, press the “x” button when time is displayed on the screen.
4. Display options
4.1 Time of day
When in time mode, press “1” to access countdown in hours & minutes (HH: MM display)
Press “edit” to set the value. Edit the values using the numerical keypad and the arrows to
navigate from hours to minutes. Press “edit” again to save and exit. Press “OK” to start. Pressing
“OK” once more will pause the countdown.
Note: At the end of a countdown (00:00), the clock will beep or simply blink if sound has been muted
(see mute button on remote control).
3.2.1 Countdown in minutes & seconds
When in time mode, press “2” to access countdown in minutes & seconds (MM: SS display)
Press “edit” to set the value. Edit the values using the numerical keypad and the arrows to
navigate from hours to minutes. Press “edit” again to save and exit. Press “OK” to start. Pressing
“OK” once more will pause the countdown.
BigTimeClocks® model XL-124W oers 2 count up options: hours/minutes or minutes/seconds.
3.2.1 Count up in hours & minutes
When in time mode, press “3” to access count up in hours & minutes (HH: MM display)
Press “edit” to set the value. Edit the values using the numerical keypad and the arrows to
navigate from hours to minutes. Press “edit” again to save and exit. Press “OK” to start. Pressing
“OK” once more will pause the count up.
Note: At the end of a countdown (00:00), the clock will beep or simply blink if sound has been muted
(see mute button on remote control).
3.2.1 Count up in minutes & seconds
When in time mode, press “4” to access count up in minutes & seconds (MM: SS display)
Press “edit” to set the value. Edit the values using the numerical keypad and the arrows to
navigate from hours to minutes. Press “edit” again to save and exit. Press “OK” to start. Pressing
“OK” once more will pause the count up.

4
BigTimeClocks®
6. Remote control
4.2 Rotating data
To display time of day, date and temperature in a rotating format
5. Mounting
Countdown in
minutes & seconds
Starts or pauses countdown/
count up functions
“12/24” hour format change
Countdown in
hours & minutes
Count up in minutes
& seconds
Count up in hours &
minutes
Mounting bracket screws into sliding
hardware pre-inserted in the frame
groove. Brackets can be applied to the
top and or sides of the clock.
Sets display on time of day only
Sets display on rotating data
(time, date and temperature)
“DST” automatically
adjusts time to refect the
+/-1 hr time change
Changes temperature
display from Fahrenheit to
Celcius

EZCLOCKS LLC.,
8565 S Eastern ave, Suite 150, Las Vegas NV 89123
Tel: [phone]
www.bigtimeclocks.biz
www.bigtimeclocks.biz
If you require any assistance, please contact customer service:
Phone# [phone]
email: [email protected]