
What’s in the box
2. Overview
• BigTimeClocks® model 150 is a 5” numeral / 6 digit indoor wall clock which displays hours, minutes and
seconds.
• The clock must not be permanently installed outdoors but can however be used for outdoor events if not
exposed to water/rain.
•The clock is supplied with a protective lm on the screen. Please note that this protective lm must be removed
prior to using the clock.
• All accessories including the remote control and power supply are housed within the box styrofoam protections.
• There are 2 main mounting methods for model 150: wall mounting or tripod mounting (see page 3). The clock
can also be desk mounted by simply resting the 1.52” deep frame on a desk surface. In this case please ensure
the clock is securely fastened onto the desk surface.
2
BigTimeClocks®Model-150 BigTimeClocks®Model-150
10 minutes
Measuring tape Drill Screws
X
1 person
1. Tools & hardware required (not included)
3
3. Wall mounting
Side view of clock
Screw in wall
Wall
Side view of clock
Screw through
tripod cross bar
Figure 2
Side view of clock and wall
NOTE: Model 150 is an indoor digital clock. The clock must neither be permanently outdoor
mounted nor exposed to water/rain. Such exposure is unsafe due to the electrical nature of the
unit, the non-waterproof framework and the the non-waterproof external power supply. Model
150 may be used occasionally for outdoor events (plugged into an outlet or external battery)
provided weather conditions are compatible with the clock’s operating requirements.
10 minutes
X
1 person
4. Tripod mounting
Figure 3
Side view of clock and tripod cross bar
Bolt
Tripod pole
Figure 1
Clock dimensions