BigTimeClocks XL-46-R-100 User manual

!
Page !of !1 3
2020 USER’S MANUAL
BIGTIMECLOCKS
MODEL #XL-46-R-100
•Use remote control keys to select function.(clock, countdown/up, interval timer, date display).
•Press EDIT key to setup function,
1. GENERAL INSTRUCTIONS
1-702 726-9030
[email protected]
www.bigtimeclocks.biz
®
Use the left/right arrow keys and number keys to set target time. (Left/right arrow keys to navigate between
blinking digits to be set, number keys to set the target time).
•Press EDIT key again to exit with saved setting. Or EXIT key to exit without saving.
MEMORY KEYS: After setting a function value, press a number key (number key 0-9) to assign the function to a
particular number key for direct recall if desired. Users can define preset values for countdown, count up,and interval
timer functions.
•PRESS CLOCK key to display time. (HH:MM:SS format is the default display).
•Display 12-hour or 24-hour (military time) format by pressing 12Hrs or 24Hrs keys.
•Press EDIT key to enter setting mode and press EDIT key a second time to save and exit setting.
•Press to enter countdown timer mode and timer will display HH:MM:SS “99 59: 59”.
•Set the target countdown time by arrows & number keys following the general setting instructions above.
•Press OK to start, stop, or to resume the timer function.
•Press to enter count up timer mode and timer will display “00:00 00”.
•Set the target count up time by using the arrows & number keys following the general setting instructions
above.
•Press OK to start, stop, or to resume the timer function.
•Press key to enter the stopwatch function and the timer displays “F3 00 00”.
•Press OK to start, stop, or to resume the stopwatch timer.
2. NORMAL CLOCK
3. COUNTDOWN TIMER
4. COUNT UP TIMER
5. STOPWATCH

•Press RT to activate negative counting. The clock will beep twice indicating this function is active. Only
1 beep indicates the function is inactive. Is so, press the key again until the clock beeps twice.
•At the end of a countdown, the clock will beep 5 times and will start blinking and counting upwards.
Beeping can be muted by pressing on the remote control.
•Auto repeat and Negative counting cannot be activated simultaneously. When attempting to do so, negative
counting has priority over auto repeat (negative counting will disengage auto repeat).
!
Page !of !2 3
6. AUTO REPEAT
7. NEGATIVE COUNTING
The Interval Timer is for workout & rest interval timing (max 99 rounds). If 2 red dots are on fast blink, it is
workout timing; otherwise it is rest time timing. One beep when workout time ends, and two beeps when rest
time ends.
•Press the INT key to enter the interval timer function and the clock displays “XX. XX .XX”.
•Press EDIT key to set the repeating rounds.
•Press EDIT key a second time to set workout time and EDIT key a third time to set the rest time.
•Press EDIT key a fourth time to exit with saved setting. Or EXIT key to exit without saving.
•Press Up/Dn key to decide whether the time will count up or down.
•Press the F2 key (see section 11, page 3) to enter the date display mode. Data shows: day of week, day of
month, and month (E.g. 1_15 6 stands for Monday, June 15).
•Press EDIT to enter setting mode. Data shows year, month and day of month. Enter data with number keys
and press the EDIT key a second time to save and exit setting.
9. DATE DISPLAY
10. NOTES
• Remote works with 2xAAA batteries.
• Please do use the original power adapter to avoid any damage to the timer.
• Power consumption is less than 5watts.
• Please stop any function in progress before changing to another timer function.
•Press to mute all clock sounds.
•Press 10S to activate a 10 second preparation time in countdown, count up and interval timer modes.
•Press LOOP to activate the auto repeat feature. The clock will beep twice indicating this function is active.
Only 1 beep indicates the function is inactive. Is so, press the key again until the clock beeps twice.
•At the end of each loop, the clock will beep once (unless muted)
•The 10s preparation time (
-+ 10S key on remote can be used while auto repeat is activated).
+
-
8. INTERVAL TIMER

Page !of !3 3
11. REMOTE CONTROL
/ de