BIIZZY zoomno MSC-5578 Manual

SETUP INSTRUCTIONS FOR WINDOWS
Power Source: 3 AAA Batteries
Program Memory: 557 kB
Style # MSC-5578
Manufactured by BIIZZY LLC
848 N. Rainbow Blvd., #1793
Las Vegas, NV 89107
© BIIZZY LLC Made in China
Install 3 AAA Batteries
Download & Install Software
1. Download BT LED software application at
https://www.zoomno.com/download.
2. Double-click icon to install software.
Activate ZOOMNO
1. On your PC, open Settings > Bluetooth & Other
Devices and select ZOOMNO LIGHT.
2. Enter connection password 0000.
3. Turn on your PC camera and your ZOOMNO device
will turn on.
Stand or Hang ZOOMNO
light Where it will be
Clearly Seen
If desired, fold unit up and
use hanging hole on back
to hang ZOOMNO Light on
a wall.
Note: height needs to be
less than 6' 6" (2m).

FCC Information: Device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two conditions.
• This device may cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH
MODIFICATIONS OR CHANGE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Increase the separation between the equipment and
receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Warning: maximum operating temperature is 104° F (40° C).
Questions? Comments? E-mail us at [email protected].
cont. from above Warnings for battery:
Do not:
• Replace battery with an incorrect type.
• Dispose of battery in a fire or hot oven.
• Mechanically crush or cut battery.
• Leave battery in extremely high temperatures.
• Expose battery to extremely low air pressure.
Do any of the aboe may result in fire, an explosion, and/or
leakage of flammable liquid or gas.
Modulation technique: BR+EDR: GFSK, π/4-DQPSK,
8DPSK LE:GFSK
Frequency Range: 2402MHz-2480MHz
Data Rate:
BR+EDR:
1Mbps/2Mbps/3Mbps LE:
1Mbps
Antenna Type: PCB Antenna
Antenna Gain: 0dbi(PCB Antenna)
This equipment should be installed and operated with a
minumum distance of 20 cm between the radiator and your body.