Billy Goat BC2600HHFT User manual

BC26 HYDRO-DRIVE Owner’s Manual
Part No 501505 1 501505_E_HI
BC2600 Hydro-Drive Series Brush Cutter
Owner’s Manual
Beginning Serial #: 100515001
Original Instructions
IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE
NOT FOR REPRODUCTION

BC26 HYDRO-DRIVE Owner’s Manual
Part No 501505 2 501505_E_HI
CONTENTS
SPECIFICATIONS AND SAFETY __________ 3
INSTRUCTION LABELS 4
ASSEMBLY INSTRUCTIONS 5-6
OPERATION 7-8
MAINTENANCE AND BATTERY MAINTENANCE 10-13
TROUBLESHOOTING 14
ILLUSTRATED PARTS LIST 15-22
Go to http://www.billygoat.com for French-Canadian translations of the product manuals.
Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits
NOT FOR REPRODUCTION

BC26 HYDRO-DRIVE Owner’s Manual
Part No 501505 3 501505_E_HI
SPECIFICATIONS
BC2600HHFT
BC2600HH
BC2600HEBH
BC2600ICH
Engine Type
Honda GXV390
Honda GXV390
Honda GXV390
Briggs and Stratton
Model Number
GX390UT2DABG
GXV390UT2DABG
V390UTDE33
2JR7720074F1
Displacement
390 cc
390 cc
390 cc
344 cc
Fuel Capacity
3.0 qt (2.80L)
3.0 qt (2.80L)
2.3 qt (2.18L)
3.0 qt (2.80L)
Oil Capacity
1.2 qt (1.1L)
1.2 qt (1.1L)
1.2 qt (1.1L)
1.5 qt (1.4L)
Unit Weight
367 lb (167 kg)
325 lb (147.4 kg)
335 lb (152 kg)
325lb (147.4 kg)
Overall Length
72 in (1.83 m)
31 in (0.78 m)
48 in (1.21 m)
Overall Width
Overall Height
Maximum Operating
Slope
20o
20o
20o
15o
SAFETY
WARNING
This product can expose you to chemicals including gasoline engine exhaust, which is known to the
State of California to cause cancer, and carbon monoxide, which is known to the State of California to
cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Read the safety rules and follow them closely. Failure to obey these rules could result in loss of control
of the unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.
NOT FOR REPRODUCTION

BC26 HYDRO-DRIVE Owner’s Manual
Part No 501505 4 501505_E_HI
INSTRUCTION LABELS
The labels shown below were installed on your BILLY GOAT®Hydro-Drive Brush Cutter. If any labels are damaged or missing,
replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for
convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure
and Item numbers shown.
ENGINE LABELS
PN 100261
(Item 61)
PN 100346
(Item 134)
PN 810736
(Item 136)
PN 100256
(Item 62)
PN 900327
(Item 20)
PN 500177
(Item 135)
PN 501502
(Item 85)
PN 400424
(Item 5)
PN 501504
(Item 139)
PN 500168
(Item 140)
Honda
Briggs and Stratton
NOT FOR REPRODUCTION

BC26 HYDRO-DRIVE Owner’s Manual
Part No 501505 5 501505_E_HI
Brush Cutter Assembly Drawing
NOT FOR REPRODUCTION