bioBidet BB-1000 User manual

OWNER’S MANUAL
BB1000

2 3
TABLE OF CONTENTS
PRODUCT INFORMATION
Important Safeguards & Cautions....................4
Cautions Before Installation................................6
Main Unit & Parts......................................................8
PRODUCT INSTALLATION
Installation....................................................................9
How To Detach the Unit.......................................12
Testing & Seat Bumpers.......................................13
PRODUCT OPERATION
Operation....................................................................14
Maintenance..............................................................25
Troubleshooting Guide........................................28
Specifications...........................................................30
WARRANTY
Warranty.....................................................................32

4 5
IMPORTANT SAFEGUARDS & CAUTIONS
READ ALL OPERATING INSTRUCTIONS BEFORE INSTALLATION
•This product should be installed according to this manual.
•Read this manual carefully and install properly.
•Do not attempt to service this appliance yourself.
•Doing so will void the warranty.
READ ALL INSTRUCTIONS BEFORE USING
•Do not open the product to repair or remodel. Only qualified service
personnel should service this product. Do not use attachments not
recommended by the manufacturer.
•Connect this product to cold water supply pipe carrying portable water. Do
not connect to an industrial water supply line that does not carry water of
drinking quality.
•Low Temperature Burns- A burn occurs when the skin has been exposed
to high temperatures. However, a low temperature burn may occur when
the skin has been in contact with an object at relatively low temperature
(about 104°F). Close supervision is necessary when this product is used by
children or adults with sensitive skin.
•If using any chemical toilet bowl cleaner, be sure to wipe up any spills that
splash onto this Electric Bidet. Do not use benzene or any acid chemical
detergent. Only neutral detergent permitted.
•Do not plug in the power cord before connecting the water supply hose.
•This product must be grounded. An approved Ground Fault Circuit
Interrupt must be used.
•Do not splash water on this product. Please provide adequate ventilation to
avoid damage to electronic components due to high level of humidity. It is
necessary to provide adequate ventilation with a fan, open door or open a
window when bathing.
•Do not touch the power cord with wet hands. Do not reach for a product
that has fallen into water. Unplug immediately!
•This product must be connected to a standard voltage power source. Do
not connect power cord if the cord is damaged or broken.
Do not plug the unit into a loose electric outlet.
•Please disconnect the power cord when you clean this product or detach
it from the toilet bowl. Do not supply electrical power to the unit until the
plumbing work has been completed.
•Keep the electrical cord away from heated surfaces to prevent a
fire hazard. Also Keep any flammable materials away from this
product at all times.
CAUTION
•Never operate this product if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the product to a
service center for examination and repair.
•Do not obstruct or put anything into the dry air outlet.
Do not apply excessive force to the shower nozzle.
•Do not stand or sit on the seat cover lid. It is not designed
to support a user’s body weight.
•Allow the seat and lid to close automatically do not force the lid closed.
•Do not strain or push the connected hose and tube connector. It may
cause water leakage. Never drop or insert any object into any opening or
hose. Use proper plumbing supplies if any modifications are to be made.
•Use this product only as described in the operating instructions. Never use
while sleeping or drowsy. Do not use while bathing.
•Be careful so that this product does not become stained
with excrement and urine.
•Drain the water from the unit and unplug the power if it is not going to be
used for an extended period of time.
SAVE THESE INSTRUCTIONS

6 7
WIRING REQUIREMENT
This product MUST be plugged into a regular voltage Grounded GFCI outlet
(North America 120V ac, 60Hz/ Europe 220-240V ~, 50/60Hz). The rated
power consumption is 660W/600-700W. In locations where only a standard
two-prong outlet is available, it is the responsibility of the user to install a
grounded three-prong outlet. Using a higher voltage is dangerous and may
result in a fire or other accident. This product is not responsible for damage
resulting from the use of it on other than specified voltage, or operating it
without proper grounding.
WARNING
This product must be on a separate circuit. No other appliance should share
the circuit with this product. Sharing a circuit could cause the branch circuit
fuse to blow or the circuit breaker to trip. Continuous usage under these
conditions could result in fire or property damage.
CAUTIONS BEFORE INSTALLATION
GROUNDING INSTRUCTIONS
•This product has a three-prong grounding plug, which must be plugged
into an outlet that is properly installed and grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. If repair or replacement
of the cord or plug is necessary, do not connect the grounding wire to
either flat blade terminal. The wire with insulation having an outer surface
that is green with or without yellow stripes is the grounding wire. Check
with a qualified electrician or serviceman if the grounding instructions are
not completely understood, or if in doubt as to whether the product is
properly grounded.
•This product is for use on a nominal 120V circuit, and has a grounding
plug that looks like the plug illustrated in sketch A in Figure 1. A temporary
adapter, which looks like the adapter illustrated in sketches B and C, may
be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet (sketch A) can be
installed by a qualified electrician. The green colored rigid ear, lug, or the
like extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adapter is
used, it must be held in place by a screw.
THIS APPLIANCE HAS TO BE GROUNDED.
IMPORTANT SAFEGUARDS & CAUTIONS (CONT.)

8 9
DANGER
IMPROPER USE OF GROUNDING CAN RESULT IN A RISK OF ELECTRIC
SHOCK. ELECTRIC WIRING HAS TO BE DONE IN ACCORDANCE WITH
ALL LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE
NATIONAL ELECTRICAL CODES.
The use of an extension cord is not recommended or advised. If it is necessary
to use an extension cord, use only a three-prong extension cord (one to one),
and a three slot built-in GFCI receptacle that will accept the plug on this
product. The marked rating of the extension cord should be equal to or greater
than the electrical rating of the unit (10amp). Consult a qualified electrician or
service person if you are not sure whether the unit is properly grounded.
OPTIONAL GROUNDING INSTRUCTIONS
CAUTIONS BEFORE INSTALLATION (CONT.)

10 11
MAIN UNIT & PARTS
CAUTION BEFORE INSTALLATION
•Do not plug in before installation
•If you need an electric power system or extension, please consult a
qualified electrician.
•Please contact out service center at 847.458.2334 when you want to
reinstall the bidet product (move or replacement).
1. Turn off the water.
•Shut off the water supply valve.
Drain the toilet tank completely.
Then remove the existing fill valve
water supply hose.
•Remove mounting bolts to release
existing toilet seat from the toilet.
2. Remove the existing seat
and lid.
INSTALLATION

12 13
•Remove existing supply hose
connected to the toilet tank. Make
sure not to damage the water
supply hose.
•Install the T-valve at the thread
from the tank.
•Remove the existing supply hose
from the toilet tank
•If your shut off valve is 1/2” size,
use supplied 1/2” conversion nut
as shown.
3. Connect the T-valve. 4. Connect the water
supply hose to the
assembled T-valve.
Water supply hose
1/2"conversionnut
INSTALLATION (CONT.)
•Place the plate and guides over
each mounting hole. Insert the
mounting bolts through the plate
and mounting holes.
•Slide cone packing and
washers onto the bolts
then fasten to securely
mount bidet seat to toilet.
5. Installation Catch Plate. 6. Bolt and Nut Assembly.
•Slide this product onto the catch
plate centering the unit with the
guide arrows on the base.
•You will hear a click once this
product is securely mounted to
the catch plate.
•This product will feel a little loose
on the toilet bowl. Adjust the fit
from front to back and side to
side for balance.
•Tighten the nuts on both
bolts securely.
•Customers should use the
new hose set provided with
the product. Do not use used
set again.
7. Assembly. 8. Bidet Hose Assembly.

14 15
9. Deodorizer Installation
•Insert the deodorant
cartridge into the unit.
•Follow the below photos to
change the deodorant.
•Insert the new deodorant
case into the unit.
10. Wireless Remote
Mounting Guide
•Remove adhesive from the back of
the bracket and place the bracket
where desired.
•Place the remote into the
remote bracket.
•Insert the batteries and close the
batter cover.
INSTALLATION (CONT.) HOW TO DETACH THE UNIT
DO NOT TURN UNIT
UPSIDE DOWN.
•Disconnect the power plug.
•Close water supply shut-off valve.
•Drain water from bidet seat using
drainage as illustrated.
•Remove bidet seat from the toilet as
illustrated. Drainage is also release
button from catch plate.

16 17
•Plug the power cord into
the outlet, and then the water
tank will be filled with water in
2 minutes.
•Check all the functions.
Cover the toilet using
the sheet of plastic wrap
on the unit to prevent the
washing water from being
sprayed out of the toilet.
Then check for all functions
described in this manual.
•There are possibilities
of water coming out
that remains in the unit
while heating.
•After installing your bidet
attachment, check to see if
there is a gap between the
toilet base and toilet seat.
•If necessary, place the bumpers
on the underside of your toilet
seat as indicated above.
TESTING & SEAT BUMPERS OPERATION
Adjust the water pressure and warm air
dryer temperature.
Adjust the oscillation function and nozzle
position (5 levels).
Adjust the water and seat temperature (4 levels).
Power Saving mode button.
When you sit on this product, please sit down on the central
position in order to activate the sensor.
After an extended wash, allow water to be reheated
for 3 minutes.
Preparation
•Check for any water leaks
•Plug the unit into the proper power source and the LED power light will
start flashing,
•Wait until the LED power light stops flashing and becomes solid red.
•The water tank will be filled after pushing a “Wash” button.
•When the water tank is filled the buzzer “Beeps” continuously, after the
water tank is full the buzzer will end with “One Solid Beep.”

18 19
OPERATION
Sit Down On the Seat
•When you sit down on the seat, the ORANGE LED lamp on the control
panel will light up.
•When the digital sensor on the seat is activated, the operation LED window
on the main unit will light “Occupied sensor” and simultaneously, the
deodorizer fan will start to work.
STOP
•Press this button to stop all operation.
POSTERIOR WASH
•Press “Posterior Wash.” Automatically, the nozzle comes out and sprays
warm water to posterior.
•Additional functions during your Posterior Wash experience are available
such as Oscillation and Massage.
FEMININE WASH
•Press “Feminine Wash.” Automatically, the nozzle comes out and sprays
warm water to feminine area.
•Additional functions during your Feminine Wash experience are available
such as Oscillation and Massage.
TURBO WASH
•Press “Turbo Wash,” the nozzle spray is more or focused to produce the
effect of strong wash, to help stimulate bowel movement.
•Press “Water pressure - High & Low button” to adjust the water pressure.
CAUTION!
DO NOT ALLOW CHILDREN TO USE THE TURBO WASH FUNCTION!
SUPERVISION IS STRONGLY RECOMMENDED FOR THE ELDERLY OR
OTHER PERSONS THAT MAY HAVE LIMITATIONS IN BODY MOVEMENT,
ILLNESS, OR DISABILITIES!
OPERATION (CONT.)

20 21
OPERATION (CONT.)
TURBO WASH
•Press “Turbo Wash” continuously for 3 to 5 seconds. Automatically,
the water nozzle comes out and sprays a warm stream of water to the
posterior center of the rectum.
•If necessary, adjust “Position” of water stream with the / buttons.
•Press “Water Pressure High & Low button” / to adjust the water
pressure to your desired comfort.
•Press the “STOP” button when you feel your abdomen is full or wait until
the “Turbo Wash” function stops, approximately 1 minute.
•You will shortly feel the urge to push the water out of your colon, push the
water and feces out as thoroughly as you can,
•Relax for a few minutes and be sure you fell your colon is empty and then
use the “Posterior Wash” and “Air Dry” function to finish.
WARM AIR DRYER
•Press “Dry” and warm, dry air is gently directed to washed area for
about 3 minutes.
•You may adjust the warm air temperature by pressing High and
Low buttons.
This product memorizes the air temperature of prior use.
WATER PRESSURE ADJUSTMENT
•After sitting down on this product, the LED lamp for water pressure on the
Power Control will light at third or middle level.
•Press High or Low to adjust the pressure of the water spray to your
desired comfort level.
NOZZLES POSITION ADJUSTMENT
•Nozzle position is adjustable to the desired position by pressing
“Front” or “Rear” button from 1 to 5 positions.
•After using this product, the nozzle will return to position 3.
OSCILLATION (Nozzle Movement Function)
•When using Posterior for Feminine Washing functions, pressing the “MOVE”
button will provide a short-motion, front to back oscillating spray for a
much wider cleansing experience. Note: This function will not work during
the “Turbo Wash” function.
•You may change the position of the Oscillating spray by pressing the
“MOVE” button again and “Front” or “Rear” buttons simultaneously.
•Push the “MOVE” button again and the oscillation motion will
stop automatically.
WARM WATER TEMPERATURE AND SEAT
TEMPERATURE ADJUSTMENT
•The temperature of water and seat are adjustable to the desired level by
pressing the “WATER” and “SEAT” button.

22 23
OPERATION (CONT.)
Auto-Setting of Oscillation Feature
You can set this function to automatically oscillate whenever the seat is
occupied and the Posterior or Feminine washes are in operation.
•Do not sit on the product.
•Press the “MOVE” button for 3 seconds or until you hear a single chime.
•Sit on the product and proceed with Posterior or Feminine Wash.
NOTE: In the automatic setting, you may still adjust the position of the
Oscillating spray by pressing the “Front” or “Rear” buttons.
Canceling the Automatic Oscillation Function
•Do not sit on the product
•Press the “MOVE” button for 3 seconds or until you hear a double Chime.
MASSAGE
•When using the Posterior Wash or Feminine Wash Functions, pressing
the “MASSAGE” button will provide you with a pulsation spray.
•You may change the pressure of the spray by pressing the
“High” button or “Low” buttons.
•Push the “MASSAGE” button again and the pulsating action will
stop automatically.
AUTO SETTING OF MASSAGE FEATURE
You can set this function to automatically pulsate whenever the seat is
occupied and the Posterior or Feminine washes are in operation.
•Do not sit on the product
•Press the “MASSAGE” button for 3 seconds or until you hear a
single chime.
•Sit on the product and proceed with Posterior or Feminine Wash.
NOTE: In the automatic setting, you may still adjust the pressure of the
pulsating spray by pressing the “High” or “Low” functions.
CANCELING THE AUTOMATIC OSCILLATION FUNCTION
•Do not sit on the product
•Press the “MASSAGE” button for 3 seconds of until you hear a
double chime.
ECONOMY (Energy Saving Mode)
•The ENERGY SAVER is not on when the LED light is off.
•Press button once to choose “ECONOMY 1”
•Press button again to chose “ECONOMY 2”
•Press button a third time to turn “ECONOMY” off
The ECONOMY 1: the water temperature will be kept at 90°F (32°C) when it is
not being used, and raise the water temperature back to normal level during
the time of use. It takes about 5 days for the unit to “learn,” and “remember,”
the usage pattern of the user(s).

24 25
OPERATION (CONT.) MAINTENANCE
CLEANING THE NOZZLE
•When the “Posterior Wash” button is pressed for 3 seconds without
occupying the seat, the nozzle can be cleaned with a soft toothbrush.
•After cleaning the nozzle, push the “Stop” button once again, and the
nozzle retracts itself.
CLEANING THE BODY OF THE UNIT
•When you clean this product, do not use thinner, benzene, or toilet bowl
cleaner. It may cause damage to the surface of unit.
•Use a wet cloth when you clean this product.
•Do not spray water directly on to this product.
•When you clean this product, disconnect the power plug.
WATER FILTER MAINTENANCE
•Use of external water filter is only recommended in areas with known hard
water issues. If a filter is used, it must be replaced every 3 months.
•This product is designed and intended for use exclusively with Bio Bidet
Carbon & Iodine water filters. The purchase or use of any other water filter
is not the responsibility of Bio Bidet Innovation LLC. As such, any use of
non Carbon or Iodine water filters is prohibited and will void the warranty
for those Bio Bidet products. Bio Bidet will not be responsible for any
resulting damages or claims related to the misuse or distribution of non Bio
Bidet Carbon & Iodine filters.
NOZZLE CLEANING (Automatically)
•This product has an automatic nozzle self-cleaning function that cleans the
nozzle before and after each use.
NOZZLE CLEANING (Manual)
•Nozzle can be cleaned manually by pressing “Posterior Wash” button for 3
seconds without being occupied on the seat and the nozzle will come out
without spraying water. After cleaning the nozzle, Press “Stop” button to
return the nozzle to the stand-by mode.

26 27
MAINTENANCE CONT.
WATER DRAINING
If you do not intend to use this product
for 14 days or longer, drain the water
from the product’s warm water tank
•Disconnect the power plug.
•Close the water shut of valve
•Press the drain lever until the
water is completely drained from
the water tank.
•To re-supply water after draining,
open the water shut off valve.
Do not drink the drained water.
Do not insert finger into the drain
hole. Before draining, unplug the
power cord ad wait 30 minutes until
the unit has cooled down.
MAINTENANCE FOR WINTER SEASON
•Check the power cord if it is plugged in or not.
•Keep the water temperature on “Middle or High Level” to prevent water
from freezing.
•If you do not intend to use the unit for 14 days or longer, disconnect the
power plug an drain the water.
CLEANING THE STRAINER
THIS PRODUCT WILL NOT OPERATE
PROPERLY IF THE STRAINER IS
CLOGGED. PLEASE CLEAN THE
STRAINER REGULARLY.
•Close the water shut off valve.
•Flush the toilet to empty the
water reservoir.
•Unscrew the water hose nut.
•Clean the strainer with a small brush
or water.
•Re-screw the water hose nut.
•Open the water shut off valve.

28 29
PROBLEM POSSIBLE
CAUSE
POSSIBLE SOLUTION
The washing
water does
not spray
•The water tank
is not filled.
•The shutoff
valve is closed.
•Freezing inside
the main unit
or the water
supply pipe.
•Wait about one minute.
Press the desired washing
button once again.
•Turn the shutoff valve to open.
•Heat the room (for about
two hours). Operating the unit
while parts are frozen will cause
a malfunction.
The unit
is not
operating.
•Disconnect the
power cord.
•The seat is not
occupied
•Connect the power cord. If problem
persists, check the power cord
supply system in your house
•Occupy the seat (The unit has an
occupied seat sensor).
Water is
leaking.
•Check the water
supply system
•If the water is leaking from the main
unit, call the service center or the
place you purchased the unit.
PROBLEM POSSIBLE
CAUSE
POSSIBLE SOLUTION
The
washing
water
pressure
is weak
•The water
pressure level is
set to “LOW”
•The strainer
is clogged.
•Set the water pressure
to be “HIGH.”
•Clean the strainer
The washing
water is
not warm
•The water
temperature is
set to “LOW.”
•Continuous
Operation has
depleted the
supply of
warm water.
•Set the water pressure to “HIGH.”
•Clean the strainer.
The seat
and dryer is
not warm
•The seat & dryer
temperature is
set to “LOW.”
•Set the seat & dryer temperature
to “HIGH.”
TROUBLESHOOTING GUIDE

30 31
SPECIFICATIONS
SPECIFICATION BB-800
Power Rating Australia or Europe: 240-240V~, 50/60Hz,
600-700W
America or Canada: 120Vac, 60Hz, 660W
Water
Inlet
Type
Type Direct Inlet flow type
Water inlet pressure 0.04 ~ 0.74MPa (04 ~ 7.5 kgf/cm)
Power cord (1.2m (4feet): America) / (1.8m: Australia or
Europe)
Wash
Device
Posterior Wash Max 1.2 l/min (Max. 0.32 GPM)
Feminine Wash Max 1.2 l/min (Max. 0.32 GPM)
Water Pressure Adj. 5 Levels
Warm Water Temp. Room Temp, Low, Normal, High
Heater 55W
Safety Devices Thermal fuse, Thermal switch, Float switch
Heated
Seat
Temperature Room Temp, Low, Normal, High
Heater 55W
Safety Device Thermal fuse
Warm
Air
Dryer
Adjustable Dry Temp.
Yes
(Room Temp ~ 55°C)
Heater/250W
Safety Device
(Thermal fuse, bitmetal)
SPECIFICATION BB-800
Turbo Function Yes
Inlet water temperature 3°C~35°C (37.4°F ~ 95°F)
Ambient Temperature 3°C ~ 40°C (37.4°F ~ 104°F)
Dimension ELONGATED
(Control)
ROUND (Control)
W:495mm (19.4in)
L:525mm (20.6in)
H: 185mm (7.28in)
W: 495mm (19.4in)
L: 493mm (19.4in)
H: 185mm (7.28in)
Weight (kg) 5.3kg 5.4kg

32 33
WARRANTY
THREE YEAR LIMITED WARRANTY
•100% Coverage of all parts and labor for the entire product for the first year
from original date of purchase
•75% Coverage of all parts for the entire product for the second year from
the original date of purchase
•50% Coverage of all parts and labor for the entire product or the third year
from original date of purchase.
Bio Bidet Innovation LLC warrants its product to be free from manufacturing
defects under normal use and service for a period of three years
prorated base as above from date of purchase. This warranty is extended
only to the ORIGINAL PURCHASER.
Bio Bidet Innovation LLC’s obligations under this warranty are limited to
repair or replacement, at Bio Bidet Innovation LLC’s option of products or
parts found to be defective, provided that such products were properly
installed and used in accordance with instructions, Bio Bidet Innovation LLC
reserves the right to make such inspections as may be necessary in order to
determine the cause of the defect. Bio Bidet Innovation LLC will not charge
for labor or parts in connection with warranty repair or replacements. Bio
Bidet Innovation LLC is not responsible for the cost of removal, return and/or
re-installation of products.
This warranty does not apply to the following items:
•Damage or loss sustained in a natural calamity such as fire, earthquake,
flood, thunder, electrical storm, etc.
•Damage or loss resulting from any unreasonable use, misuse, abuse,
negligence, or improper maintenance of the product.
•Damage or loss resulting from removal, improper repair, or modification
of the product.
•Damage or loss resulting from sediments or foreign matter contained in
a water system.
•Damage or loss resulting from improper installation or from installation
of a unit in a harsh and/or hazardous environment.
This warranty gives you specific legal rights. You may have other rights which
vary from state to state.
To obtain warranty repair service under this warranty, you must take the
product or deliver it prepaid to a Bio Bidet Innovation LLC service facility
together with a letter stating the problem, or contact a Bio Bidet Innovation
LLC distributor or products service contractor, or write directly to Bio Bidet
Innovation LLC, 7900 S RT 31 Crystal Lake IL 60014.
This written warranty is the only warranty made by Bio Bidet Innovation LLC.
Repair or replacement as provided under this warranty shall be the exclusive
remedy available to the purchaser. Bio Bidet Innovation LLC shall not
be responsible for loss of the product or for other incidental, special, or
consequential damages or expenses incurred by the purchaser, or for labor
or other costs due to installation or removal, or costs of repairs by others,
or for any other expense not specifically stated above. Except to the extent
prohibited by applicable law, any implied warranties, including that of
merchantability or fitness for use, are expressly limited to the duration of this
warranty, Some states to not allow limitations on how long an implied warranty
lasts, or the exclusion or limitation of incidental or consequential damages, so
the above limitation and exclusion may not apply to you.
WARNING! Bio Bidet Innovation LLC shall not be responsible or liable for any
failure of, or damage to, this plumbing product or product component caused
by either chloramines in the treatment of public water supply or in-tank bowl
cleaners containing chlorine (calcium hypochlorite).
Note: The use of high concentration of chlorine or chlorine
related products can seriously damage the fittings. This damage

34 35
can cause leakage and serious property damage.
INFORMATION TO THE USER (For America)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is o guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the use is encouraged to try to correct the interference by one more
of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
WARRANTY
•Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
NOTE: The manufacturer is not responsible for any Radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
For more information, please contact your dealer or us.
BIO BIDET INNOVATION LLC
7900 S RT 31 Crystal Lake IL 60014
T: 847.458.2334
F: 847.854.1296
Email: [email protected]om
www.biobidet.com

Thank You
Technical Support/Customer Service
7900 S Route 31 Crystal Lake, IL 60014
T: 847.458.2334
U.S. TOLL FREE: 877.339.5214
[email protected]om
www.biobidet.com