bioBidet PEARL S-100 User manual

S-100
Handheld Bidet Sprayer

Page 7
Page 7
Page 7
Page 8
Page 9
Features
Sprayer

Product Information
FEATURES
High quality ceramic valve
Dual Sprayer
6’’Comfortable handle body
Easy D.I.Y installation
Ambient temperature bidet wash
Adjustable water pressure
58’’ Metal spiral hose
No electricity or batteries required
One year warranty
The Pearl S100 is equipped with a dual water pressure system.
To ensure the safety of your home, and best performance of
your new product, please turn off the water at the T-valve after
each use. This function is designed to protect you from possible
water damage and is essential for proper use of the product.
ATTENTION

Handheld Bidet
T-Valve Shutoff
Stainless Steel
Supply Hose
Spray Holster
Expanding nut Screw
X2
(Be sure Flat Washer is
inside end of T-Valve)
(use to fix the spray
holster on wall)
(use to fix the spray
holster on wall)

PEARL
When installing this unit,be sure that the water
supply valve is fully turned off.Failure to do so
can result in flooding and water damage.
Notice:Observe all local plumbing,electrical and building codes
CAUTION :Do not over tighten any connections.Over tightening
connections can cause damage to the parts and cause ceaking.
1.Shut off water supply to toilet. Flush toilet
to drain all water inside the tank.
4

PEARL
Notice:
This device is designed for connection to a cold water source with a
pressure of 20-80 psi.
2.Disconnect the supply line from the toilet
fill valve.Attach 7/8” T-Valve Shutoff to the
threaded fill valve on your toilet. Be sure
the 7/8” Flat Washer is in the T-Valve before
installing.Position the T-Valve so that the
shutoff handle is facing the front of the toilet.
3.Reattach your existing toilet supply line
to the bottom of the T-Valve. Be sure all
connections are secure, and no leaking
or water is present.
step 2
step 3
step 4
4.Remove protective plastic covers on
threaded caps from ends of 48” Stainless
Steel Supply Hose.Attach the hex-head
end of the hose to the T-Valve.
5

6
5.Attach the Handheld Bidet to the other
end of the supply hose. As a precaution,
slide the level on the handheld bidet sprayer
to “off”,which is away from the sprayer head.
PEARL(cont)
6.Mounting Spray Holster:
Option2:
Wall Mount: Using a Phillips screwdriver,
remove the plastic toilet clip. Find desired
location on wall near toilet and use screw
(included) to attach the Holster to wall.
7.Turn on water supply valve on the back wall and check for any
leaks. Use common plumbers tape if necessary on any leaking
threads, reattach and test again.Carefully remove toilet lid and place
holder in desired location.
Option1 :
Toilet Mount:
Carefully remove toilet lid and place holder
in desired location.
Wall
Expanding Nut
Screw
step 5
Use expanding nut if attaching to dry wall

1. Open the T-Valve to allow water to flow to the Handheld Bidet sprayer.
2. Direct the Handheld Bidet to the appropriate area and slide the lever to
the “on” position.
3. When finished, slide the lever to the “off” position and close the T-Valve.
NOTE: THE T-VALVE MUST BE SHUT OFF AFTER EACH USE.
Failure to turn off after each use may cause flooding and water damage.
BBC Innovation is not responsible for damage that is caused by failure
to follow this instruction.
PEARL
7
PRODUCT OPERATION
HOW TO USE THE PEARL
Your Pearl is made with a higher grade fire-retardant ABS resin. Using
harsh cleaning chemicals can weaken the material causing it to damage
and develop cracks.
Clean the Pearl by wiping the surface area with a damp cloth regularly.
Do not use harsh detergents or any cleaning tools with bristles on your
bidet. Steam cleaning is the preferred cleaning method for your bidet.
For a deep, chemical free clean, consider the BioMist Bidet Cleaner.
It is highly recommended that the water supply valve is turned off when
not in use.
Note: If any leaks occur, check all rubber washers and make sure
all connections are tight and secure. If leaking persists, discontinue
use of the unit, turn off the water source, and contact support.
E: [email protected] P: 847-458-2334 C: www.biobidet.com

Warranty
Your Bio Bidet is warranted against defects in materials or workmanship for
one (1) year from the date of original purchase. Defective parts or a defective
product retuned to Bio bidet will be repaired with new or comparable rebuilt parts,
or exchanged for a refurbished Bio Bidet product as determined by Bio Bidet in
their sole discretion.
This limited warranty given by Bio Bidet covers all defects
encountered in normal use of this Bio Bidet product, and
does not apply in the following cases:
1. Loss or damage of the product due to abuse, misuse, tampering, mishandling,
improper packaging by you, alteration, and failure to follow operating instructions.
2. Use of parts or supplies (other than those provided by Bio Bidet dealers) that
cause damage to the product.
3. Replacement of discolored or stained parts caused by chlorine, bleach, amonia,
and other chemicals, cleaning supplies, oxidation, normal wear and tear.
4. Damage to or malfunction of the unit as a result of improper and negligent
installation.
5. Any and all damges to plumbing, walls, floors, ceiling, and personal property
resulting from water leaks or breakage. The product must be used at the user’s
own risk. Therefore, the owner hereby releases the manufacturer and distributor
from any and all claims for damages where the above condition exists.
No implied warranty, including any implied warranty of merchantibility or fitness or a
particular purpose, applies to BBC Innovation products after the applicable period
of the express limited warranty or guarantee, except as mentioned above, given by
any person or entity with respect to Bio Bidet shall bind Bio Bidet (Some states and
provinces do not allow limitations on how long an implied warranty, so the above
limitation may not apply to you). BBC Innovation shall not be liable for revenues or
profits, inconvenience, expense or substitute equipment or service, or any other
special, incidental, or consequential damages caused by the use or misuse of,
or inability to use, Bio bidet, regardless of the possibility and foresee-ability of
such damages. In no event shall recovery of any kind against BBC Innovation be
greater in amount than the purchase price of the product and causing the alleged
damage. Without limiting the foregoing, you assume all risk and liability for loss,
damage, or injury to you and your property and to others and their property arising
out of use or misuse of, or inability to use, the Bio Bidet not caused directly by the
negligence or BBC Innovation. This limited warranty shall not extend to anyone
other than the original purchase of the Bio Bidet product.

Technical Support/Customer Service
Bio Bidet
7900 S IL Route 31 Crystal Lake IL 60014
T: 847-458-2334
Toll Free: 877-339-5214
[email protected]
www.biobidet.com