bioBidet SlimEdge User manual

Clean in Comfort

Table of Contents
Features
Dimensions
Pre Installation
How to use the SlimEdge
1

2
FEATURES
Industry’s first Relax Panel
Comfort Grip Control Dial

3

4
DIMENSIONS
0.236

5
PREINSTALLATION
Step 1
INSTALLING THE SlimEdge
1.Remove the existing toilet seat by locating the
bolts and nuts,typically under a plastic cover,
and removing them first.
Check Water Supply Line
Inspect your current water supply line that connects to the toilet
tank fill valve to ensure it is a flexible water supply hose. If it is a rigid
pipe ,you will need to purchase a flexible water supply hose before
installing the SlimEdge. The hose needs to be 7/8”(to connect to the
T-valve we provided) on one end and either 3/8” or ½”,depending
on your wall valve, on the other end.
Please be advised that the provided T-Valve
should be installed at the fill valve under the
toilet tank,NOT down at the water supply
coming from the wall.
If you do not have access to the fill valve under
the toilet tank,contact Biobidet Customer Service
at 847.458.2334 and we may be able to provide
alternative fittings.

6
INSTALLING THE SlimEdge(cont.)
2.Close the water supply valve and flush the toilet
completely so that there is little to no water left in
the toilet tank.
3.Disconnect the water hose from underneath the
toilet tank.
4.Connect the 7/8”T-valve to the toilet fill valve
where you just removed the water hose from.
a.Make sure the rubber washer is properly
seated and the narrow side is up.
5.Attach the water supply hose that comes from
the water shut off to the bottom of the T-Valve.
Step 2
Step 3
Step 4
Step 5

7
INSTALLING THE SlimEdge(cont.)
6.Connect the metal hose we supplied to the open
side of the T-valve.
7.Insert the rubber non-slip mats to the bottom of
the bidet and place the circular mounting
brackets into the bidet attachment.
8.Place the bidet on the toilet with the mounting
brackets over the mounting bolt holes and make
any needed adjustments to make sure the bidet
is centered on the toilet and so you can see the
mounting bolt holes through the mounting brackets
of the bidet.
Step 7
Step 8
Step 6

8
INSTALLING THE SlimEdge(cont.)
9.Place the toilet seat back on the toilet over the
bidet and secure the bolts down so that the seat
and bidet attachment are stable.
10.Connect the hose from step 6 to the bidet
water connection underneath the handle
of the SlimEdge.
11.Slowly turn the water supply valve back on
and check for leaks and test the unit for
functionality.
Note:
If any leaks occur, check all rubber washers and make sure all
connections are tight and secure.
12. If there are no immediate leaks, check again
in about 5-10 minutes and your SlimEdge is
ready for use!
Step 9
Step 11
Step 10

9
HOW TO USE THE SlimEdge
For back wash turn the control knob to
front/feminine
days it is highly recommended
that the water supply valve is turned off.
weaken the material causing it to damage and develop
cracks.

10
Warranty
1
2
3
4
5
No implied warranty, including any implied warranty of merchantability or
fitness or a particular purpose, applies to BBC innovation bidet after the
applicable period of the express limited warranty stated above, and no other
express warranty or guaranty, except as mentioned above, given by any
person or entity with respect to Bio-Bidet shall bind Bio Bidet, (Some States
and provinces do not allow limitations on how long an implied warranty, so
the above limitation may not apply to you) BBC innovation shall not be liable
for revenues or profits, inconvenience, expense for substitute equipment or
service, or any other special, incidental or consequential damages caused by
the use or misuse of, or inability to use, Bio-Bidet, regard-less of the
possibility and foresee-ability of such damages. In no event shall recovery of
any kind against BBC innovation be greater in amount than the purchase price
of the product and causing the alleged damage. Without limiting the
foregoing, you assume all risk and liability for loss, damage or injury to you
and your property and to others and their property arising out of use or
misuse of ,or inability to use, the Bio-Bidet not caused directly by the
negligence or BBC innovation This limited warranty shall not extend to
anyone other than the original purchaser of the Bio-Bidet

11
S