bioBidet BB-400 Operator's manual

Bio Bidet BB-400 Installation:
Easy as 1,2,3 Installation. BB-400 comes with full quality parts to ensure defect free, leak free
installation. Comes with detailed installation guide and full colored quick guide.
Direct connection allows easy connection. Using supplied 3 way T valve adaptor, simply split water
supply line to water reservoir and replacing your toilet seat to bidet seat is all it takes.
Turn you toilet into bidet seat in few minutes.
1. Close shut off valve and remove the water
supply hose after drain water tank.
2. Remove existing toilet seat/lid.
3. Connect supplied T valve.
4. Insert supplied water supply hose.

5. Install quick release plate and slide Bio Bidet
BB-400 into slot.
6. Install supplied mounting bolt.
7. Secure seat.
8. Connect supplied water supply line to the
Bio Bidet BB-400.