Biomark GLOBAL POCKET READER PLUS User manual

QUICK START GUIDE
GPR PLUS
GLOBAL POCKET READERTM PLUS
208.275.0011 www.biomark.com

QUICK START GUIDE 2
GPR Plus Reader
DESCRIPTION
The GPR Plus Reader is a universal portable reader
designed for detecting RFID PIT tags with the purpose of
identifying animals and wildlife.
The device can read PIT tags of a wide range of
technologies: FDX-B ISO, HDX ISO and FDX-A
(FECAVA). The GPR Plus can, also, read and display the
temperature measurement of Biomark BioTherm
temperature sensing PIT tags.
In addition to its PIT tag detecting functionality, the GPR
Plus reader can store up to 3000 tag IDs in its internal
memory, each with associated date/time stamp and
temperature reading (if available), and transmit them to a
PC via USB cable connection or wirelessly, using
Bluetooth® connection.
The GPR Plus reader is supplied with the Biomark Tag
Manager 3 software, which enables user to download the
content of the reader’s tags memory, customize the
reader’s settings or update the GPR Plus application
firmware. The software is available for download at
www.biomark.com, along with the reader User Manual
and software User Manual.
982005624300245
37.5°C / 99.5°F
985005624300245
MEM:0008
Bluetooth®indicator
Battery level indicator
ID code
Memory level (when enabled)
or temperature information
Go to www.biomark.com to download Reader User
Manual, Software and Software User Manual.

QUICK START GUIDE 3
GPR Plus Reader
GETTING STARTED
The GPR Plus comes supplied with six AAA rechargeable
NiMH batteries, which must be inserted, according to the
diagram below, and fully charged prior to use (steps 1
through 3).
If preferred, six AAA alkaline (non-rechargeable) batteries
can be used to power the reader, BUT they should never
be charged to avoid risk of fire (follow only step 1).
Step 1:Unscrew the batteries compartment cover
retention screw, located on the back of the GPR Plus
reader at the bottom and remove the cover. Install the
batteries according to the polarity indicators. Replace the
cover and tighten the screw.
WARNING: BATTERIES MUST BE INSTALLED AS
PICTURED ABOVE TO AVOID EXCESSIVE HEAT OR
PERMANENT DAMAGE TO THE READER DURING
CHARGING

QUICK START GUIDE 4
GPR Plus Reader
Step 2:Remove USB dust cap covering the connector
and attach supplied USB cable to GPR Plus reader.
Step 3:Attach the other end of the USB cable to the
supplied AC power adaptor. Plug the AC power adaptor
into power outlet. While the batteries are charging, the
bars of batteries level icon on the reader’s display will be
flashing and will stop flashing when the batteries are fully
charged. It will take approximately 3 hours to fully charge
the batteries.
DO NOT MIX RECHARGEABLE AND STANDARD
BATTERIES.

QUICK START GUIDE 5
GPR Plus Reader
DO NOT ATTEMPT CHARGING STANDARD
ALKALINE BATTERIES.
CHARGE THE BATTERIES INDOORS AND BETWEEN
0°C AND +40°C TEMPERATURES ONLY.
If the reader is not being used for extended periods of
time, charge the batteries at least once every three
months to extend their life.

QUICK START GUIDE 6
GPR Plus Reader
READING PIT TAGS
To scan for PIT tags, PRESS AND HOLD the READ
button down. The reader will display “SEARCHING”.
If a PIT tag is successfully detected, its number will
appear on the reader’s display and the reader will stop
scanning for tags automatically. To scan for another tag,
the READ button must be pressed and held down again.
If a PIT tag has not been detected and the READ button
is released, “NO ID FOUND” will be displayed on the
reader’s display.
Keep the reader as close to the animal or item as possible
and move slowly over standard locations for the particular
species.
Test the reader regularly, by scanning the test FDX-B ISO
tag in the supplied key chain. Do not attach the key chain
to the reader.
If PIT tags are not being detected or being detected
poorly, confirm that the reader is being operated away
from metal objects, such as metal collars, stainless steel
tables, etc.; check the environment for presence of
potential sources of electromagnetic interference (EMI),
such as PC monitors, laptop or phone chargers, etc., or
another active RFID readers in the close vicinity.
Note: PIT tag placement may vary from animal to animal.

QUICK START GUIDE 7
GPR Plus Reader
BIOMARK TAG MANAGER SOFTWARE
The GPR Plus reader comes with Biomark Tag Manager
3 software (for Windows® operating system only). Please
refer to Biomark Tag Manager 3 User Manual for
information on how to install and use this tool.
Biomark Tag Manager 3 software offers the following
capabilities:
•Download content of GPR Plus reader tags
memory and export it to a MS Excel, MS Access
or text file.
•Customize all available GPR Plus reader
settings.
•Update GPR Plus reader application firmware.

QUICK START GUIDE 8
GPR Plus Reader
READER SETTINGS IN TAG MANAGER
SOFTWARE
The GPR Plus reader is delivered with tag memory and
Bluetooth® communication enabled.
These and all other available settings can be customized
using the Tag Manager software (refer to Biomark Tag
Manager 3 User Manual for more information).

QUICK START GUIDE 9
GPR Plus Reader
TROUBLESHOOTING
•PIT tags not being detected: confirm that the
reader is being operated away from metal
objects, such as metal collars, stainless steel
tables, etc.; check the environment for presence
of potential sources of electromagnetic
interference (EMI), such as PC monitors, laptop
or phone chargers, etc., or another active RFID
readers in the close vicinity.
•Memory cannot be downloaded: make sure the
tags memory is enabled in reader settings (refer
to Biomark Tag Manager 3 User Manual for
more information).
•Bluetooth not visible: Check if Bluetooth icon
appears on the display. If not, enable Bluetooth
by using PIT tag Management Software.
•Bluetooth visible but not connectable: Make sure
your reader is configured to be visible and
connectable through Tag Manager software
(refer to Biomark Tag Manager 3 User Manual
for more information).
•Incorrect date/time: connect reader to Tag
Manager software click on “Set GPR Plus
Reader Date/Time From Computer Clock”
button under Device Manager tab in Reader
Settings (refer to Biomark Tag Manager 3 User
Manual for more information).
Note: Refer to GPR Plus Reader User Manual for more
information or contact the Customer Service Department
of Biomark at (208) 275‐0011 or email
[e-mail] for technical assistance.

QUICK START GUIDE 10
GPR Plus Reader
WARRANTY
The Global Pocket Reader Plus is warranted against
defects in materials and workmanship, under normal use
and service for one (1) year from the day of shipment.
This warranty will not apply if adjustment, repair or parts
replacement is required because of accident, neglect,
damage during transportation or causes other than
ordinary use.
Manufacturer’s sole responsibility under this warranty
shall be at its option, to either repair or replace any
product which fails during the warranty period. In no event
shall Manufacturer be liable for any indirect or
consequential damages or loss of profit.
Note: The GPR Plus is NOT a waterproof or water-
resistant reader and would not be covered under warranty
should it sustain water damage.