BION GPS - 100 User manual

Turn on/off
Press Record key and Mode key for 3 seconds to turn on/off the device
ALT Gain
ALT Loss
Maximum ALT
Total ALT
Auto wake up : If there is any speed or viberation, the computer will wake up from sleep
mode.
Auto sleep : If there is no speed or viberation for 6 minutes, the computer will go into
sleep mode automatically.
Factory Default
In any page, press and hold Selet key for 3 seconds to clear the data, except for Odometer
and Total ALT, while recording, the data cannot be cleared.
Press Set key 3 seconds to go to set mode
Set key: Next setting
Mode key: Enter/Next step
Record key: select the option
Press Set key 3 seconds or wait for 30 seconds to exit setting.
Press Mode key to enter
Press Record key to select Power saving / Always on
Press Set key twice to set altitude.
Press Mode key to enter
Press Record key to select Auto Detect / Manual Set
Manual: Press Mode key to go to next step
Press Record key to choose number
Press Set key twice to set backlight.
Setting
Press Mode key to enter
Press Record key to select Button on / Always on / Always Off
Press Set key twice to set auto wake up.
Press Mode key to enter
Press Record key to select On / Off
Press Set key twice to set clock.
Press Mode key to enter
Press Record key to select Auto detect / Manual Set
Press Mode key to go to next step
Auto detect:
set 12/24H -> set Time zone -> set Daylight saving
Manual:
set 12H/24H -> set Clock -> set Date
Press Record key to select option
Press Set key twice to set unit.
Press Mode key to enter
Press Record key to select Metric / Imperial
Press Mode key to go to next step
Press Record key to select Celsius / Fahrenheit
Press Set key twice to set Odometer.
Press Mode key to enter and go to next dight
Press Record key to select number(0-999999 KM / 0-624999 mile)
Press Set key twice to set factory default.
Press Mode key to reset the data
Press Record key to select Yes; Press Mode key to select No
Press Record key to confirm
Press Set key twice to go to about.
Press Mode key to view the software version.
Press Set key 3 seconds or wait for 30 seconds to exit setting.
NOTE : Select auto detect and turn on GPS, time information will be updated
by GPS signal automatically.
Function Change
GPS - 100
GPS - 100
Mode/Clear key
Press Mode key change mode.
NOTE: If turn on GPS, the device will capture location from the satellite
and calculate speed, distance, route, and other data.

turn off.
turn off. When restarting the device, it will continue to record.
If the device’s
While riding, if
previous data
MAINTENANCE
If the display contrast changes and figures become faint, it's time to charge the
battery.Do not expose cycle computer to extremely cold or hot temperatures
i.e. don't leave the unit in direct sunlight for extended periods of the time.
TROUBLESHOOTING
Never use the cycle computer in combination with other medical / implanted
electronic equipment and device (especially heart pacemakers, EKG equipment,
TENS equipment, cardio-pulmonary machines and pacemaker).
If you are severely ill or pregnant, please consult your doctor before using cycle
computer.
Keep this device away from children.
As with most electronic receiving devices, there can sometimes be interference
that causes inaccurate display readouts. Avoid using your cycle computer near
commom sources of interference. These include high voltage power lines, air
conditioning motor units, fluorescent lights, wristwatches, mobiles and computer.
Please read over the following information before using the Cycle computer.
The product is for one year limited warranty commencing on the date of purchase.
The product will be free form defects in material and workmanship for one year from
the date of purchase.
Warranty dose not cover damages due to misure, abuse or accidents, cracked or
broken cases, negligenceof precautions, improper maintenance or commercial use.
Warranty is void if the repairs are done by non authorized service technician.
The warranties contained herein are expressly in lieu of any other warranties including
implied warranty of merchantability and/or fitness for purpose. In no event shall
manufacturer be liable for any damages, direct or incidental, consequential or special,
arising out of or related to the use of this manual or the product described herein.
During this warranty period (one year) the product will either be repaired or replaced
without charge.
LIMITED WARRANTY
IMPORTANT HEALTH NOTICE
SPECIFICATIONS
Computer
Press Mode key to save
Q1. Display is black or very light:
The battery power may be low. Try to change the battery.
Q2. Display becomes dark or black:
The unit is too hot. Place the unit in a shaded area, and it will return to normal.
Q3. The unit operates slowly or struggled:
The unit is too cold. Warm the unit, and it will return to normal.
Q4. Data in display varies enormously:
Check the surroundings for electro magnetic or high energy interference and move
away from the source of interference.
Q5. Data in display shows slowly:
The unit may be affected by low temperature factor but it didn't influence the function
reading. When the temperature rises, the data reading/ witch will back to the normal.
Q6. Current Speed does not appear:
It may cause by the following situation:
GPS signal is weak, please make sure turn on the GPS and move to the outdoor,
a wide area without interference.
Q7. Altitude seems not accurate:
The device’s altitude measurement is determined on the basis of the barometric
air pressure. Any change to the weather means a change in the air pressure, which
can lead to a change in your current altitude. To compensate for these changes in
air pressure, we suggest you enter current altitude into the device manually before
your trip.
Note: Strongly suggest users, use the USB cable which is included to connect to the PC.
The PC software is for users to set their cycle computer and analyze their
recording data
Please download the PC software from BION webside : http://bion-sport.com/