Bircher PrimeMotion C User manual

1
PrimeMotion C
Observe the national and international regulations on door safety.
Only trained, qualified personnel may mount and start up the detector.
The unit may only be opened and repaired by Bircher Reglomat.
The unit may only be operated from a safety extra-low voltage (SELV) system with safe electrical separation.
Always consider the safety functions of your application as a whole, never just in relation to one individual section of the system.
The installer is responsible for carrying out a risk assessment and installing the detector and the door system correctly.
Avoid touching any electronic components.
The door drive and transom profile must be earthed correctly.
Start-up
2Montag
Translation of the original instructions
Rcommnddstart-upsqunc:I.MountingII.Connction
Mounting
I
G n ral
Saf ty instructions
1
Quality
international
level
EN ISO
9001
Hood
Light window detector indication
no function
Cable bushing
ounting
icrowave module
LED microwave: green
Potentiometer
Prime otion C
1. Remove cover hood 2. Lay and connect cable 3. ount detector
Radarfeld
icrowave motion detector for opening
automatically controlled doors
1. Position drill template
2. Drill the holes, remove drill template
3. Lay cable and mount detector
ENGLISH
ounting of the detector
II
El ctrical conn ctions
Conn cting
3
+
M chanical fin tuning
4
––
++
Manual s ttings of th
inclination
0° ... +45° in 5° steps
Manual s ttings of th
pivoting
– 20° ... +20° in 5° steps
––
++
1m
2m
0m
0m
1m
2m
3m
4m
Wid radar fi ld turn 90° Narrow radar fi ld
min. = 0.8 x 1.6, max. = 2.3 x 4.8 m (WxD)
min. = 1.6 x 0.8, max. = 4.8 x 2.3 m (WxD)
+
1m
2m
0m
0m
1m
2m
3m
4m
––
Inclination angle: 35° Inclination angle: 35°
2.2 m
2.2 m
–


90°


PrimeMotion C Controller
white
brown
green
yellow
white
Power
Supply
Potential-
free
output
12–36 VDC
12–28 VAC
GND
+
Controller input
brown
green
yellow
Cable
3m
PrimeMotion C Controller
white
brown
green
yellow
white
Power
Supply
Potential-
free
output
12–36 VDC
12–28 VAC
GND
Controller input
brown
green
yellow
Cable
3m
+
Low Active High Active






Radar field 

5Configurationbyhandof radarfildwithpotntiom tr
Radar function Dscription
Field size
1= Smallest radar field
2 ... 8 = edium radar field
9 = Largest radar field size
2
gr n LED Fault R m dy
continuously
lit
Radar tripping when door is closing 1. Set angle of radar further away from the door.
2. Adjust radar field size.
Radar false tripping without
apparent external influence
1. Avoid light sources (e.g. fluorescent tubes) in the immediate vicinity of the detector.
2. No moving objects (plants, advertising posters, etc.) in the vicinity of the detector.
3. Avoid strong vibration at the radar detector
4. Possible influence from a second radar detector in the vicinity (very unlikely)
Id ntification of th y ar of manufactur
8.2
Smallest radar field Largest radar field
medium radar field
Pot ntiom t r
Year of ma-
nufacturing
Week
Factory settings
R m dying malfunctions
6
Most important t chnical data
7
T chnology Radar 24.125 GHz
Mounting h ight 1.8 - 4 m
Op rating voltag 12–36 VDC / 12–28 VAC
Op rating curr nt max. 32 mA at 24 VDC
Pow r consumption max. 1.3 W
Output radar
max. switching voltage: 48 VAC / VDC
max. switching current: 120 mA
max. switching capacity: 550 mW
Prot ction typ Suitable for use acc. to IP54
EMV / RTTE acc. to E C and RTTE directives
Op rating t mp ratur -20° to 60° C
Dim nsions 172 x 60 x 48 mm (LxWxD)
W ight 120 g
Cabl l ngth 3 m
D claration of conformity, id ntification of th y ar of manufactur by m ans of th s rial numb r
8
9Contact data
Manufacturer:
Bircher Reglo at AG
Wiesengasse 20
CH-8222 Beringen
Switzerland
www.bircher-reglo at.co
D claration of conformity
8.1
anufacturer: Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen, Switzerland, www.bircher-reglomat.com
Authorised rep: Bircher Reglomat GmbH, Robert Bosch Strasse 3, D-71088 Holzgerlingen, Germany
Following directives have been observed: achinery Directive 2006/42/EC, R&TTE Directive 1999/5/EC, E V Directive 2004/108/EC
Following standards have been taken into acc.: EN 61000-6-2, EN 61000-6-3
Signee: CEO, L. Oberholzer / QHSE, R. Wäckerlin / 1.12.2010, CH-8222 Beringen
Product variant: Prime otion C
298506B05/12