BitaTek Cyclops-II BTS 700 Service manual

Setting Guide
Version 1.0
September / 22/ 2014

Cyclops-II BlueTooth Scanner Configuration Guide 2
Table of Contents
1. Device Descriptions ...........................................................................................................4
2. Operation Modes................................................................................................................6
3. Key Function Description ..................................................................................................7
4. LED , Buzzer and Vibration...............................................................................................8
5. Bluetooth Connect Description........................................................................................10
5.1. Specification.........................................................................................................10
5.2. Data transfer via Bluetooth Under Batch mode...................................................10
5.3. SPP Communication............................................................................................. 11
5.3.1. SPP Transfer Data format......................................................................... 11
5.3.2. Host command..........................................................................................12
5.4. HID Communication............................................................................................14
6. USB connect.....................................................................................................................16
6.1. Specification.........................................................................................................16
6.2. USB Mass Storage communication......................................................................16
6.2.1. USB data transfer mode ...........................................................................16
6.2.2. The Data format of data file.....................................................................17
6.3. USB-HID communication....................................................................................18
7. The Suitable use method ..................................................................................................19
8. Simple Setting..................................................................................................................20
8.1. Batch Mode setting...............................................................................................20
8.1.1. Data transfer by USB situation.................................................................20
8.1.2. Data transfer by SPP Master mode situation............................................20
8.1.3. Data transfer by SPP Slave mode situation..............................................21
8.2. Real mode setting under HID communication.....................................................22
8.3. Real mode setting under SPP communication .....................................................22
8.3.1. Real mode setting under SPP master mode..............................................23
8.3.2. Real mode setting under Spp Slave mode................................................23
8.4. Hybrid mode setting under SPP communication .................................................23
8.4.1. Hybrid mode setting under SPP Master mode .........................................24
8.4.2. Hybrid mode setting under SPP Slave mode............................................24
9. System Detail Setting.......................................................................................................26
9.1. Factory Default Setting ........................................................................................26
9.2. The setting Barcode of System.............................................................................30
9.2.1. System mode setting.................................................................................30
9.2.2. HID Communication Setting....................................................................36

Cyclops-II BlueTooth Scanner Configuration Guide 3
9.2.3. SPP Communication Setting ....................................................................39
9.2.4. Batch mode setting...................................................................................43
9.2.5. Barcode Data and Scanner Setting...........................................................47
9.2.6. Alpha-Numerical Setting barcode............................................................69
10. Appendix 1...............................................................................................................74
11. Appendix 2............................................................................................................... 75

Cyclops-II BlueTooth Scanner Configuration Guide 4
1.Device Descriptions
Table - 1
Item
Descriptions
Scan Window
Scanner scans barcode via this window ( DO NOT SCRATCH or
BLOCK )
Power LED
Battery Status
Green light ON: Charging Completed
Green light blinking: Battery Low
Red light ON: Battery Charging in Process
Red light blinking: Charging Failed
Scan LED
Barcode Scanning Result:
Green ON: Barcode decoding success
Red ON: Barcode reading fail (decode time-out error )
Orange blinking: System firmware update in process
Orange ON: System firmware update completed
Bluetooth LED
Bluetooth Communication Status
Blue fast-blinking: Radio Fail, Pairing Started,
Paring Fail, Lost Connection,
Not Connected,
Communication Error
Scan Window
Bluetooth LED
Scan LED
Power LED
SCAN Key
FUNCTION Key
Battery
USB Port & Reset button
Strap Post

Cyclops-II BlueTooth Scanner Configuration Guide 5
Blue slow-blinking: Successful Connection
USB Connection Status( Bluetooth Mode )
Blue ON: USB Connected
Blue slow-blinking: Data Transmitting
Scan Key
Press and hold more then 3 seconds：Power On
Press：Barcode Scan
Function Key
According difference mode it will have difference function, Please
reference【3. Key Function Description】。
Battery
AC Adapter for charging
USB Port
Use USB cable for data transfer.
Reset Button
Press the button, The system will be power off
Strap Post
Hand strap use

Cyclops-II BlueTooth Scanner Configuration Guide 6
2.Operation Mode
This device have three action mode, the default action mode is real mode.
The mode can be changed by scan setting barcode. But, the customer can not change the
mode If the data file（data.txt）have some records not be send out .
The description of mode, please see the follow table.
Table - 2
Action Mode
Description
Real Mode
The scan data will be transferred via Bluetooth connect, and the scan
data will not be transferred and not be saved to data file when the
Bluetooth is disconnect.
HID communication support.
This mode support connection error handshake on SPP.
It need an application to handle the communication handshake and
data receive / send on SPP communication
Batch Mode
The scan data will be saved to this device.
You have two methods to get the scan data
Bluetooth data transfer：You can send the data via Bluetooth SPP
connection.
USB transfer：You can transfer the data file via USB cable connect.
You have two methods to delete the data.
Scan a factory default of setting barcode
Delete the data file after USB connect
Hybrid Mode
The scan data will be transferred via Bluetooth connect, and if
Bluetooth disconnect, the scan data will be saved to the data file, after
Bluetooth reconnect, the records of data file will be transfer to host
device via SPP communication. After transfer complete the records on
the data file will be deleted.
You need an application to handle the handshake under SPP
communication.
USB-HID
Mode
In this mode, the scan data will be transferred via USB cable to Hos. It will
like a USB scanner. You can change to Bluetooth mode by setting, then the
scan data will be transferred via Bluetooth.
The customer can make a decision, according the customer environment to choice the best
mode.

Cyclops-II BlueTooth Scanner Configuration Guide 7
3.Key Function Description
The follow table descript the motion of the status and key function.
Table –3
Motion status
Power
Off
Bath mode
Real mode
Hybrid mode
HID
SPP
Disconnect
SPP
Disconnect
Scan
Key( press
more then
3 seconds)
Power
On1
—
—
—
Scan Key
+
Function
Key
—
Bluetooth
data transfer
and wait state
mode 2
—
—
Scan Key
—
Scan
Function
Key
—
Delete one
recode of data
file3
Send key
code4
Send
key
code5
Reconnect
Send
Key
code
Reconnect
Reset
Button
—
Reset6
1This BTS700 will auto Power off。
Press Scan key and hold more then 3 seconds on the BTS700, it will start on and load the
system configure.
2When you change it to Bluetooth data transfer mode, BTS700 will wait the host command
from terminal host device include smart phone or tablet device or PC .
3The scan data will be saved to the file of memory. You can delete the same record on the
data file of memory。The last record will be deleted first, even you scan the same data on
the different time. It can not delete multi records on the same time.
It can be set enable or disable according you setting.
4The software keyboard of iPhone, iPad can be call by press Fn key of BTS700 Via
Bluetooth communication, It can be setting enable/disable different Key code to data
transmit..
5It can be setting enable/disable different Key code to data transmit
6The power is off after reset

Cyclops-II BlueTooth Scanner Configuration Guide 8
4.LED , Buzzer and Vibration
The following table is description of the LED display and sound on the different issue.
Data collect status
Scan LED
Vibration
Battery
LED
Bluetooth
LED
Sound
User good scan
Green (50ms)
Vibrate 100ms
Bi
User bad Scan
(default 5s scan
timeout, 0.5s~25.5s
timeout setting ranged
0.5s)
Red( 300ms)
Bi, Bi, Bi
Configuration good
scan
Green (100ms)
Vibrate
200ms,100ms
(Time interval
between two
vibrations:30ms)
Bi~, Bi
Configuration bad
scan ( 5 second time
out)
Red( 300ms)
Bu, Bu, Bu
Enter SPP Slave
mode
Bu, Bu
Enter SPP Master
mode
Bi, Bi
Enter HID mode
Bu, Bi
Real mode Power Up
Green
Vibrate 300ms
Batch mode Power Up
Red
Vibrate 300ms
Never reset Date and
Time when Power Up
( Only Batch mode )
Orange Flash
On：300 ms
Off：500 ms
3 Times
Vibrate 300ms
Bu~,Bu~,Bu~
The data file of
memory have data
record When Power
Up
Green Flash
On：300 ms
Off：500ms
3 Times
Vibrate 300ms
Memory Full
Red Flash
On：300 ms
Off：500ms
3 Times
Bu~, Bu~
Delete one record of
data file on the
memory success
Orange
Bi, Bi,
It is not found that
press Fn key to delete
one record Under
Batch mode.
RED
Bu, Bu, Bu
The record format of
data file on memory be
changed
Red( 300ms)
Bu, Bu, Bu
Battery Charging
Red

Cyclops-II BlueTooth Scanner Configuration Guide 9
Battery Charging fail
Red Flash
On：100 ms
Off：100ms
Battery Charging finish
Green
Batter low
Red Flash
On：200 ms
Off：800ms
Bluetooth Paring
Quickly Blue
Flash
wait enter the PIN
code when Bluetooth
paring ( 60 second
time out )
Quickly Blue
Flash
Bi~, Bi~ until
paring ok or
Time out
Bluetooth Paring fail
Quickly Blue
Flash
Bu~,Bu~,Bu~
No Bluetooth connect
Quickly Blue
Flash
Bluetooth connect
success
Vibrate 300ms
Slow Blue
Flash
Bi, Bi
Bluetooth connected
Vibrate 300ms
Slow Blue
Flash
Bluetooth disconnect
or connect fail
Vibrate 300ms
Quickly Blue
Flash
Bu, Bu
Bluetooth reconnected
and data transmit
under batch mode
Red( when the
data
transmitting )
Slow Blue
Flash
Bluetooth reconnected
and data transmit
under Hybrid mode
Red( when the
data
transmitting )
USB connected
Blue On
USB data transmit
Quick Blue
Flash
Press Fn Key to wait 6
seconds while
Bluetooth reconnect.
Blue On
Firmware Updating
Orange Flash
Firmware Update
finish
Orange
Restore Factory
Default
Fast Blinking
Green
Tone ：
Bi：short、High tone Bi~ ：Long、High tone
Bu：short、Low tone Bu~：Long、Low tone
Vibration：
If set vibration on, then enable vibration behave work .

Cyclops-II BlueTooth Scanner Configuration Guide 10
5.Bluetooth Connect Description
5.1. Specification
This BT700 is a wireless interface device, it is follow Bluetooth ver2.1+EDI Class II
specification, include the SPP ( Serial Port Profile ) and HID ( Human Interface Device
Profile) on this device, It must install the same profile on the paring device (ex. iPhone, iPad
or PC ) too for Bluetooth communication.
Specification
Description
Intensity of the
electric wave
Class II
The max distance is 10 M for Bluetooth communication, The
max distance will different according user environment.
Paring
One BTS700 paring with one host device, it can not paring
with more then one host device in the same time.
Communication
SPP ：It is a serial port communication for SPP slave mode or
SPP master mode.
HID：It is Human interface communication.
Authentication &
Encryption
Authentication ：
Default PIN Code is “0000”, it can be changed by
configure barcode.
Encryption ：
The data can be encrypted by Bluetooth communication,
Default is no encryption. It can be enabled / disable by
configure barcode.
※If BTS700 want connect with the iPhone、iPad of Apple product , the iOS of iphone 、
iPad must lately of version 5.0.
※If BTS700 want connect with the product ofAndroid smart phone, the OS of Android
must lately of version 4.0.
※If BTS700 want connect with the BT dongle of PC or NB, the dongle must lately of BT
version 2.0.
5.2. Data transfer via Bluetooth Under Batch

Cyclops-II BlueTooth Scanner Configuration Guide 11
mode
The customer can get the data that be saved under Batch mode by Bluetooth。The BTS700
must change to Bluetooth data transfer mode, you can reference the「5.3 SPP communication」
Item
Description
How to transfer the
data
Two method of transfer
Press Key（Scan Key + Fn Key）
Scan the “BT data transmission mode change”configuration
barcode (A033A)
5.3. SPP Communication
This section is about the SPP communication
The BTS700 will execute the handshake with host device ( ex. PC, iPhone, iPad or Android
smart phone ) according the setting of BTS700 configuration under SPP communication. So
the customer must install an application on the host device to handle the communication
handshake with BTS700.
The follow table is for customer application reference.
Master mode
BTS700(This Device) send out the paring request to host device.
Please reference “The setting barcode about physical address of
Bluetooth module”
The Bluetooth physical address of Host device only 12 digital.
Slave mode
The host device sent out the paring request to BTS700.
Please reference “The Setting barcode about Device Name of BTS700”
The BT manger application of host device select the BTS700 device name
※If BTS700 want connect with the BT dongle of PC or NB, the dongle must lately of BT
version 2.0.
5.3.1.SPP Transfer Data format
The Bluetooth communication of SPP mode is simulate the communication of virtual serial
Port, So the host device must install and execute an application to handle the handshake with
BTS700.

Cyclops-II BlueTooth Scanner Configuration Guide 12
The data format of SPP transfer of BTS700 as follow for handshake with Host
application：
[Prefix][Digit][Data][Checksum][Suffix]
Item
Byte
Number
Value
Description
Prefix
1
STX(0x02)
The start bit of SPP communication.
Digit
2
The size of Data
Data
The scan data
Check Sum
2
The check sum of Data
Suffix
1
ETX(0x03)
The Stop bit of SPP communication.
5.3.2.Host command
Under SPP communication mode, the host device (includeAndroid smart phone, PC ) can
send Host Command to BTS700 to control BTS700, and BTS700 will return the result to host
device after execute the host command.
The data format of Host command as follow：
[Start][Command][Option][End]
Field
Format
Description
Start
!
Host command start
character.
Command
1 ~ 8
Command number, that
have 1 to 8 , you can
reference「Host Command
function list table」
Option
YYYMMDDHHMM
For date and time setting
End
CRLF(0x0D0A)
Host command stop
character.
The data format of result that BTS700 execute the host command, the data will be return to
the host device as follow：

Cyclops-II BlueTooth Scanner Configuration Guide 13
[Start][Command][,][Response][End]
Field
Format
Description
Start
RE
The start character of response after
executed host command.
Command
1 ~ 8
The response after execute host command
number.
，
Separation
Response
OK
NG
The result after execute host command
YYMMDDHHMM
The date & time of BTS700 for host
command 3
F
M
L
The battery status of BTS700 for host
command 4
*******
The record count of data file for host
command 8
End
CRLF(0x0D0A)
The stop character of response after
executed host command.
The detail of host command and return value, please reference “Host command function
list”table as follow.
The number 5 ~ 8 is used while BTS700 waiting state of “Bluetooth data transmit mode”.
Table : Host Command function list table
No
Function
Host sand
Host Receive
Notes
1
Scan
!1<CRLF>
RE1,OK<CRLF> and
<data>
RE1,NG<CRLF>
The BTS700 will auto
scan when the host
command be executed,
BTS700 will return scan
ok or not and scan data
according SPP transfer
format.
2
Set data and
Time to
BTS700
!2YYYYMMDDHHM
M<CRLF>
RE2,OK<CRLF>
RE2,NG<CRLF> ( this
is data NG , ex
“20130430190000”)
RE,NG<CRLF> ( This
BTS700 will set date &
time according this host
command.

Cyclops-II BlueTooth Scanner Configuration Guide 14
is data format NG , ex
“201304312300”)
3
Read Date of
BTS700
!3<CRLF>
RE3,
YYYYMMDDHHMM
<CRLF>
BTS700 will return date
& time according to host
device.
4
Power status
!4<CRLF>
RE4,F<CRLF>
RE4,M<CRLF>
RE4,L< CRLF>
BTS700 will return
battery status to host
device.
F is Full power
M is Middle power
L is Low power.
5
Send the scan
data file of
BTS700
!5<CRLF>
Send data to host
[Prefix][Digit] [Time
Stamp] [Delimiter]
[Data][Checksum][Suffix]
BTS700 will send all
records of the data.txt on
Memory to host device.
6
Delete the scan
data file of
BTS700
!6<CRLF>
RE6,OK<CRLF>
RE6,NG<CRLF>
BTS700 will delete the
data.txt file on memory
7
Communication
Wait status
!7<CRLF>
RE7,OK<CRLF>
RE7,NG<CRLF>
BTS700 will change to
waiting next host
command status, in this
time BTS700 scan
function will not work.
8
recode count of
data file
!8<CRLF>
RE8, XXXX<CRLF>
BTS700 will return the
record count of data.txt
on memory.
5.4. HID Communication
BTS700 pairing with iPhone, iPad of Apple product or paring withAndroid, PC by HID
communication, the BTS700 will be keyboard interface of those terminal host device. The
HID mode is default factory mode of BTS700, so the product of Apple can quickly connect
with BTS700 and ease use.
About connect method, please reference the Bluetooth menu of those terminal host device.
The customer can press Fn key to call the software keyboard of iPhone, iPad to show or hide

Cyclops-II BlueTooth Scanner Configuration Guide 15
After BTS700 connect with iPhone, iPad complete.
※If BTS700 want connect with the iPhone, iPad of Apple product, the iOS of iphone , iPad
must lately of version 5.0.
※If BTS700 want connect with the product ofAndroid smart phone, the OS of Android
must lately of version 4.0.
※If BTS700 want connect with the BT dongle of PC or NB, the dongle must lately of BT
version 2.0.
Nots：
If you want the BTS700 be the key board interface of iPhone, iPad, Please set
to“English”mode on the keyboard setting of iPad, iPhone first. If you does not set to
“English”mode, it will display other character on iPhone, iPad after you use BTS700 scan a
barcode data.

Cyclops-II BlueTooth Scanner Configuration Guide 16
6.USB connect
6.1. Specification
This device （BTS700）have a USB port , it will not support charge when you use USB cable
to connect with BTS700 and PC host.
Specification
description
Communication
Spec
USB 2.0 Full speed
USB Mass Storage support.
USB-HID communication support.
Cable
Micro USB type B
Connect USB
cable
USB Mass Storage support :
If set Bluetooth (SPP, HID) communication, the BTS700 will
be a USB Mass Storage when USB cable connect between BT700
and Host PC.
USB-HID communication support :
If set USB-HID communication, the BTS700 will like a USB
scanner, then you can scan barcode when the USB cable connect
between BT700 and Host PC.
6.2. USB Mass Storage communication
6.2.1.USB data transfer mode
Under Batch mode, the scan data will be saved into the data.txt file of BTS700 memory.
User can obtain data.txt file that stored in memory of BTS700 with USB thread.
Specification
Description
Transfer
Connect with PC：
When the BTS700 connect with PC via USB cable, the
USB memory of BTS700 will be a disk of PC.
※Please use the USB cable we offer , or buy to us.
USB Memory
Function
Under Batch mode. The maximum records of data.txt are 8000
records. It will include two files on the memory of BTS700.

Cyclops-II BlueTooth Scanner Configuration Guide 17
Data.txt ：Under batch mode, the scan data will be saved to
this file, if user use USB cable to connect between
PC and BTS700, the user can read this file or
delete this file.
System.cfg ：This is a setting file of BTS700. When this file
be updated, and repower on this device, the system
will be start up and be set according this file.
Notes
Under USB data transfer mode. The follow function will be
limited.
Bluetooth will be disable ( it will be disconnect ).
Scan function or other operate will be disable.
6.2.2.The Data format of data file
The recode size is 2048 Bytes on data.txt, the scan data will be saved into this data file. Please
reference the『9.2.4 Batch mode setting』
Data format descript as follow
[Mark][Checksum][Delimiter][Timestamp][Delimiter][Data][Termination]
Item
bytes
Default value
description
Mark
1
Special Mark
＋：Added
—：deleted
＃: Send out ok
Check sum
4
Check sum
Use 2 digital of ASCII code
Delimiter
1
Separate mark
Time stamp
19
YYYY/MM/DD,hh:mm:ss
Date & time
The separate of data & time,
It is same with Delimiter
field.
Delimiter
1
Separate mark
Data
2020
Scan data,
If data length at the full 2020
Bytes, will fill blank in order
to mend all over 2020bytes
behind data
Record
2
CRLF(0x0D0A)
The termination of every

Cyclops-II BlueTooth Scanner Configuration Guide 18
Termination
record.
6.3. USB-HID communication
Description
Setting
Setting Barcode
Cord
ID
Change to
USB-HID mode
Enable
A114A0
Change to
Bluetooth mode
Enable
A114A1
If set “change to USB-HID mode”, after connect the USB cable , the device like a USB
scanner .
If set “change to Bluetooth mode”, after connect the USB cable , The device will be a USB
mass storage device.
Default is “Bluetooth mode”.

Cyclops-II BlueTooth Scanner Configuration Guide 19
7.The Suitable use method
The user can follow the follow chart to select the best mode for use.
Start
The scan data must be
save to memory and
doesn’t need pairing
with smart phone or PC
via Bluetootn?
Selsect Batch mode
(reference 8.1 Batch mode setting)
transfer data
by USB Transfer data
by Bluetooth
Send pairing
request by
BTS600 Send pairing request
by Host
SPP Master
mode SPP Slave mode
Is it need connect with
Apple product?
Is it the key board
interface of PC or
Android ? And need
handshake.
Real mode under HID connect
(Reference 8.2 the setting of real mode under
HID communication)
The data must be saved
Same with Key Board
Need connected with Apple product
The distance will over
10M( or over the max
distance of BT
communication)?
Use Bluetooth
Connect with PC or
Android
Real Mode under SPP connect
(Reference 8.3 the Setting of Real mode
under SPP communication)
Need Handshake
Never over
the max
distance
of bluetooth
Hybrid Mode under SPP Connect
(reference 8.4 The setting of Hybrid
mode under Spp communication)
Sometimes will over the max
distance of BT
communication
Send pairing
request by
BTS600
Send pairing
request by
Host
SPP Master
mode SPP Slave
mode
Send pairing
request by
BTS600
Send pairing
request by
Host
SPP Master
Mode SPP Slave
mode

Cyclops-II BlueTooth Scanner Configuration Guide 20
8.Simple Setting
The use choice the best mode according【7. The Suitable use method】
8.1. Batch Mode setting
If the user want scan the barcode data and be saved into the memory of BTS700, please use
Batch Action mode.
The user can get the record of memory on the BTS700 by different method, according User
setting.
Use USB：If user choice the data transfer mode by USB, please reference【6. USB Connect】
Use Bluetooth：If user choice the data transfer mode by Bluetooth, it will need an application
be install and running on the terminal host likeAndroid smart phone、PC.
please reference【5. Bluetooth Connect Description】
8.1.1.Data transfer by USB situation
Description
Setting
Setting Barcode
Cord
ID
Communication
setting
SPP Slave
mode
A002A
Action mode setting
Batch
mode
A014A2
※It must setting SPP Slaver mode even the user use USB cable for data transfer.
8.1.2.Data transfer by SPP Master mode situation
Description
Setting
Setting Barcode
Cord
ID