Dtronic DT3420 User manual

User Manual
DT3420
Barcodescanner –DT3420
:0645733500
: [email protected]
:https://www.dtronic.nl/
Datum :28-1-2024
Versie :1.0

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 2 van 52
Introduction
Thank you for trusting a product from DTRONIC. Please read the contents of the user manual
carefully in order to use the products safely and effectively.
You are advised to keep this manual correctly for your installation and as a reference. Please do not
disassemble the product or tear off the seal, otherwise we will not provide warranty or
replacement service.
The illustrations in this user manual are for reference only. If there are images that do not match
the actual product, please take the actual product as standard.
Updated information is subject to change without notice. All information in this manual is
copyrighted and our company reserves all rights. It is prohibited to distribute, copy, compile or sell
all or part of this manual without our written permission.
DTRONIC is a BOIP registered trademark and legally protected in cooperation with GS1. Diwolar is
the only company with the rights to market this trademark. If you have purchased a product that
was not purchased through Diwolar, the warranty is void. When contacting customer service
always ask for the order number. This user manual applies to DTRONIC barcode scanners that
identify barcodes using a laser scan pattern.
DTRONIC is not liable for damages and defects suffered when the barcode scanner fails, does not
work properly or is misused.
Do you have any questions about your product? We will be happy to assist you.
Mail: [email protected] Bereikbaar van 09:00-17:00u
WhatsApp: [phone] Bereikbaar van 09:00-17:00u
Website: www.dtronic.nl Webshop 24/7 geopend
Kind regards, team Dtronic
-Diederik Director
-Arjan Operations manager
-Marjolein Financial employee
-Jaxx Administrative employee
-Tim Customer service
-Hessel Customer service
- Roger Test center
- Kees-Jan Logistics

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 3 van 52
Inhoud
INTRODUCTION..........................................................................................................................2
1. PRODUCT.............................................................................................................................6
1.1 Function............................................................................................................................ 6
1.2 Unbox................................................................................................................................ 6
1.3 Start .................................................................................................................................. 6
1.4 Window............................................................................................................................. 6
1.5 Reading ............................................................................................................................. 7
1.6 Picture............................................................................................................................... 7
1.7 Led indicator..................................................................................................................... 7
2. SYSTEM SETUP .....................................................................................................................8
2.1 System Setup .................................................................................................................... 8
2.1.1 Setup code.............................................................................................................. 8
2.1.2 Restore factory default settings............................................................................. 8
2.1.3 Read version number ......................................Fout! Bladwijzer niet gedefinieerd.
2.1.4 Product User Settings............................................................................................. 8
2.2 Pairing bluetooth .............................................................................................................. 9
2.3 Wireless ..........................................................................................................................10
2.3.1 Bluetooth name.................................................................................................... 11
2.3.2 Led ........................................................................................................................ 12
2.3.3 Level lighting......................................................................................................... 12
2.3.4 Beeper Duration................................................................................................... 13
2.3.5 Beeper settings..................................................................................................... 13
2.3.6 Set the beep switch.............................................................................................. 13
2.3.7 Power on beep switch.......................................................................................... 14
2.3.8 Read success beep switch .................................................................................... 14
2.4 Reading mode settings ................................................................................................... 14
2.4.1 Level trigger mode................................................................................................ 14
2.4.2 Continuous mode (default) .................................................................................. 14
2.4.3 Pulse trigger mode ...............................................................................................15
2.4.4 Auto Scan mode ................................................................................................... 15
2.4.5 Repeat read switch..........................................Fout! Bladwijzer niet gedefinieerd.
2.4.6 Code reading timeout........................................................................................... 15
2.4.7 One read timeout................................................................................................. 16
2.5 Communication settings.................................................................................................17
2.5.1 Communication settings.......................................................................................17
2.5.2 USB keyboard .......................................................................................................17
2.5.3 USB keyboard sending speed...............................................................................18
2.5.4 Set USB keyboard sending speed.........................................................................18
2.5.5 Control Characters................................................................................................ 19
2.5.6 Serial communication settings ........................Fout! Bladwijzer niet gedefinieerd.
2.5.7 Serial port baud rate setting............................Fout! Bladwijzer niet gedefinieerd.
2.5.8 Serial port output ............................................Fout! Bladwijzer niet gedefinieerd.
2.5.9 Serial port parity bit setting.............................Fout! Bladwijzer niet gedefinieerd.
2.6 Data format setting.........................................................................................................19
2.6.1 Hide 1 character ...................................................................................................19
2.6.2 Custom prefix on/off settings............................................................................... 19
2.6.3 Customized prefixes............................................................................................. 20
2.6.4 Custom suffix on/off settings ...............................................................................20

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 4 van 52
2.6.5 Custom suffixes ....................................................................................................21
2.6.6 Custom ID output method ..............................Fout! Bladwijzer niet gedefinieerd.
2.6.7 Customize Code ID ..........................................Fout! Bladwijzer niet gedefinieerd.
2.6.8 Terminator settings..............................................................................................21
2.6.9 CTRL + X................................................................................................................ 22
2.6.10Case output settings............................................................................................. 23
2.6.11Data output settings.............................................................................................24
2.6.12Pre/Post data length setting.................................................................................24
2.7 Symbologies.................................................................................................................... 24
2.7.1 1D all symbologies................................................................................................ 25
2.7.2 2D all symbologies................................................................................................ 25
2.7.3 QR mirror code.....................................................................................................25
2.7.4 Inverse barcode....................................................................................................25
2.7.5 Data matrix mirror code.......................................................................................26
2.7.6 Mirror Code for all symbologies...........................................................................26
2.7.7 All barcodes.......................................................................................................... 26
2.7.8 EAN8 Settings .......................................................................................................26
2.7.9 Code 11 Settings................................................................................................... 27
2.7.10Add-on code setting .............................................................................................27
2.7.11EAN 13 settings.....................................................................................................28
2.7.12ISSN Settings....................................................Fout! Bladwijzer niet gedefinieerd.
2.7.13HANXIN.................................................................................................................28
2.7.14ISBN setting .....................................................Fout! Bladwijzer niet gedefinieerd.
2.7.15UPC-A settings...................................................................................................... 28
2.7.16UPC-E settings ......................................................................................................29
2.7.17UPCE ..................................................................................................................... 29
2.7.18EAN/UPC...............................................................................................................29
2.7.19Code 39 Settings................................................................................................... 30
2.7.20Code 39 Length Setting ...................................Fout! Bladwijzer niet gedefinieerd.
2.7.21Code 32 settings................................................................................................... 31
2.7.22Code 128 settings.................................................................................................31
2.7.23Code 128 length setting ..................................Fout! Bladwijzer niet gedefinieerd.
2.7.24Code 93 settings................................................................................................... 31
2.7.25Code 93 Length Setting ...................................Fout! Bladwijzer niet gedefinieerd.
2.7.26Codabar Settings ..................................................................................................32
2.7.27Codabar Length Setting...................................Fout! Bladwijzer niet gedefinieerd.
2.7.28Codablock A.......................................................................................................... 32
2.7.29Codablock F ..........................................................................................................32
2.7.30GS1 Databar Limited............................................................................................. 33
2.7.31GS1 Databar omnidirectional ............................................................................... 33
2.7.32GS1 Databar Expanded......................................................................................... 33
2.7.33DOT_CODE............................................................................................................ 33
2.7.34Composite ............................................................................................................33
2.7.35Data matrix Code.................................................................................................. 34
2.7.36MSI........................................................................................................................ 34
2.7.37QR......................................................................................................................... 35
2.7.38Micro QR code...................................................................................................... 35
2.7.39PDF417 .................................................................................................................35
2.7.40Micro PDF417.......................................................................................................36
2.7.41Pharmacode .........................................................................................................36
2.7.42RSS-Expanded.......................................................................................................36

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 5 van 52
2.7.43RSS-Limited........................................................................................................... 36
2.7.44RSS-14...................................................................................................................37
2.7.45Trioptic Code ........................................................................................................37
2.7.46Telepen................................................................................................................. 37
2.7.47Straight 2 of 5 Industrial....................................................................................... 37
2.7.48Maxicode.............................................................................................................. 38
2.7.49Interleave 2 of 5 (ITF5) setting .............................................................................38
2.7.50Extra code setting............................................Fout! Bladwijzer niet gedefinieerd.
2.7.51Airline 2 of 5 ......................................................................................................... 38
2.7.52Aztec code ............................................................................................................39
2.7.53ITF25 length setting.........................................Fout! Bladwijzer niet gedefinieerd.
3. APPENDIX ..........................................................................................................................40
3.1.1 Appendix 4 ASCII Code table ...........................Fout! Bladwijzer niet gedefinieerd.

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 6 van 52
1. Product
1.1 Function
- Works with Plug&Play and without installation software.
- Works with most WMS systems.
- Some WMS or POS systems must be set up to use a scanner.
- Device the scanner is connected to will see it as keyboard.
- Basically the scanner scans the 95% of bar codes, remaining 5% can be set as desired with this
manual.
- There are patented parts in the scanner, DTRONIC has the rights to sell these items on the
Dutch, Belgian and German market
1.2 Unbox
After opening the box containing the product, perform the following steps:
- Remove the scanner accessories from the packaging.
- Remove the scanner from the packaging.
- At the packing list, check that everything is complete and in good condition. If there are
damaged or missing parts, save the original packaging and contact DTRONIC for customer
service.
Packing list:
1. Handheld scanner
2. USB Connection Cable (for wireless scanners, this is the charging cable).
3. Paperclip
4. Abridged user manual
1.3 Start
Startup: connect the computer to the scanner. The computer will recognize it as a keyboard and the
scanner can be used.
Power off: remove the cable connected to the scanner; remove the USB connected to the
computer.
Restart: if the scanner crashes or is unresponsive, turn it off and restart it. Optionally, use the
factory setting from this manual
1.4 Window
The scanning window must be kept clean, the supplier does not bear the warranty responsibility
due to improper maintenance. Prevent the window from wearing out or being scratched by a hard
object. Use a soft cloth to remove stain on the scanning window. Clean the scan window with a soft
cloth, such as a lens cleaning cloth
Spraying liquid on the scan window is prohibited. Prohibit all cleaning solvents except cleaning
water.

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 7 van 52
1.5 Reading
If the bar code is small, it should be closer to the scan window; if the bar code is large, it should be
further away from the scan window for easier reading.
If the bar code is highly reflective (for example, the coated surface), you may need to tilt the bar
code at an angle to scan the bar code. The best distance to read a bar code is 10-15 cm
1.6 Picture
1.7 Led indicator
INDICATOR STATUS
EXPLAIN
Red light on
Charging
Red light off
No charging
Green light on
No decoding
Green light off
Decode succesfully
One blue light on
Pairing successful or connect to
USB

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 8 van 52
2. System Setup
2.1 System Setup
Option and function setting mainly by reading a series of special bar codes. In this chapter, we give
you a detailed introduction to the options and functions available for user setup and the
corresponding setup code.
This method of setting up the scan is direct, easy to understand and user-friendly.
2.1.1 Setup code
Startup settings (default)
Exit Settings
2.1.2 Restore factory default settings
Restore factory settings
2.1.3 Product User Settings
Save user default settings
Restore user default settings

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 9 van 52
2.2 Pairing bluetooth
1. Press the button on the scanner, the scanner turns on and a green light appears.
2. Connect the USB connector to the computer or laptop, wait a few moments for the
computer to find and actually see it.
3. At the bottom of the bar, right-click on the bluetooth icon.
4. Choose: Join PAN.
5. Put the scanner in connection mode, by holding down the scan button for 8 seconds.
6. Choose: Add device to PAN.
7. Computer finds the scanner as keyboard and is now in the list of connected devices.
8. Once again, put the scanner in connection mode by holding down the button for 8 seconds.
9. The scanner connects and everything works.
10. Open a WORD file and scan the barcode below to test.
11. Check that the number below also appears in WORD.

User manual ‘DT3420’
Datum : feb-2024
Versie : 1.0
pagina 10 van 52
2.3 Wireless
Bluetooth HID Mode
Quick Pair
Bluetooth SPP Mode
Bluetooth BLE Mode
Bluetooth BLE Mode
Android Input Method
USB-Virtual COM Port
Enable Long press to enter Bluetooth HID
Mode Pairing
Disable Long press to enter Bluetooth HID
Mode Pairing
Set custom Bluetooth device name
Query Bluetooth Name