Scantech VEGA V-1020 User manual

Quick Start Guide
VEGA Area Imager V-1020 / V-1020BT
Handheld Bar code Scanner

Copyright © 2009, Scantech-ID BV.
This manual is copyrighted, with all right reserved. Under the
copyright laws, this manual may not, in whole or in part, be copied,
Photocopied, reproduced, translated or converted to any electronic
medium or machine readable form without prior written consent of
Scantech-ID.
P/N A270002 V1.0 August 2009

Quick Start Guide
Scantech-ID VEGA

Table of contents
Chapter 1 Introduction................................................5
Chapter 2 Quick Start
2.1 Standard Shipment Package............................6
2.2 Start up.............................................................6
2.3 Start up with Bluetooth......................................7
2.4 User’s Installation and Programming Manual...7
Chapter 3 Programming Sequence
3.1 Factory Default Settings....................................8
Chapter 4 Scanner Imager Mode
4.1 Imager Mode....................................................9
Chapter 5 RS232 Parameters for V-1020
5.1 Baud rate........................................................11
5.2 Data bit ..........................................................12

3
5.3 Stop bit ...........................................................12
Chapter 6 USB Parameter………………..………… 13
Chapter 7 Bluetooth Setup for V-1020BT
7.1 Set Cradle Interface Barcode..........................14
7.2 Bluetooth Default Setting.................................15
7.3 Scanner Server/Client Mode...........................15
7.4 Sleep Mode.....................................................16
7.5 Memory Mode.................................................17
Chapter 8 Postambles
8.1 Postamble.......................................................18
Chapter 9 Symbologies
9.1 Enable Symbologies........................................19
9.2 Disable Symbologies.......................................24
Chapter 10 Test Symbologies..................................25

Chapter 11 Specification
11.1 Readable Symbologies..................................27
11.2 Physical Characteristics................................27
11.3 Physical Characteristics Bluetooth Cradle....28
11.4 Operational....................................................28
11.5 Electrical Characteristics(V-1020)................28
11.6 Electrical Characteristics (V-1020BT)..........29
11.7 Bluetooth Characteristics..............................29
11.8 Environmental Characteristics......................29

5
1. Introduction
Thank you for purchasing this brand-new designed
imager hand held bar code scanner.
VEGA is a cutting-edge gun-type Area Imaging
barcode scanner which is designed specifically for
retail market. To the brand new series of VEGA, we
add on more user friendly functions with detachable
cable that makes it more easily to be operated by the
customers.
The new VEGA scanner has a most modern design
with the decorative cover display on the top of the
scanner that enhances the looks of the checkout
counter. This magnificent design allows end-users to
display their product information or any relevant
commercial message in the cover display. This
advanced mechanical design truly creates a win-win
solution for both POS retail systems and consumers.
In short, VEGA is an absolute a high performance
gun-type scanner, which provides the customer with
the most cost effective solution in the market. It is
perfectly suitable and definitely the best choice for any
retailers using POS environment.

2. Quick Start
2.1 Standard Shipment Package
The standard shipment package is provided with the
following items:
a. VEGA Area Imager Handheld Bar code Scanner
b. Communication Cable (RS232, PS/2 KBW (V-
1020BT
series only) or USB)
c. Power Supply (if applicable)
d. Quick Start Guide
e. Stand (V-1020) or Bluetooth Cradle (V-1020BT)
f. Transparent Cover Plate
Visually inspect the VEGA and accessories for any
evidence of physical damage. If anything is missing or
appears to be damaged, immediately contact your
dealer.
2.2 Start up
The interface setting (RS232 or USB) of the VEGA
has been set by factory, your VEGA can plug and play
without any setting.
Connect the communication cable provided to the
RJ45 connector inlet of the scanner and your POS or
Host system. Power-on the VEGA with the provided

7
power supply if applicable. Press the RED trigger
button at the top side of the unit; aim the bar code,
which covered by the LED red light zone. You will
hear a beep and the green LED indicator will light on
after scan successfully.
2.3 Start up with Bluetooth
Connect the communication cable provided to your
POS or Host system and cradle. Power-on the cradle
with the provided power supply, scan the Bluetooth
MAC address code located on the top side of the
cradle. After approximately five seconds your
connection is operational and the blue led on the
cradle is on.
Before you can use the VEGA with Bluetooth the
scanner must charged for a minimum of 8 hours in
first time, if the battery is full, the charge red light will
be off and green light will be on.
2.4 User’s Installation and Programming Manual
If you need more in depth information about the
VEGA or more advanced setup options you can
download the VEGA User’s Installation and
Configuration Manual on web site:
www.champtek.com

3. Programming Sequence
You can set-up your VEGA by scan necessary
programming codes for parameters that meet
applications. After these scan(s) the VEGA is
automatically configured.
The chapters 4 to 9 provide you with the programming
codes necessary for a basic setup. For more
advanced setup options see VEGA user’s manual.
3.1 Factory Default Settings
The default RS232 settings are 57600 baud, 8 data
bits, and no parity.
The factory default settings are shown with <> and
bold in the following pages.
By scanning “Set factory default” code, the setting will
go back to the factory default setting. If you are using
a USB interface, your device will be lost USB interface
settings, please re-configure USB parameter.
Set factory default