BJ Live BJ-EIFUVL Quick start guide

BJ-EIFUVL UV LED Spotlight
Guide for Installation and Use
c.Mare de Déu del Coll, 70,Local|08023|Barcelona|Spain|t.+34 93 285 04 37|fax + 34 93 553 56 34| [e-mail] | www.bjliveat.com

BJ-EIFUVL UV LED Spotlight
Guide for Installation and Use
1_Components
RGB LED spotlight 3 meter DMX cable
2_Connections
BJ-EIFUVL UV LED Spotlight
Page 2
DMX Connection
Programming
panel

Raise/ Lower
value
Menu
BJ-EIFUVL UV LED Spotlight
Guide for Installation and Use
3_Programming the spotlight
Programming Panel.
3.1_Configuration for passive use
In this mode, the spotlight will turn on as soon as the power supply is
connected. The power supply must be disconnected to turn the spotlight off.
Mode
Function
Value
At
Automatic Mode
01
At01 should appear on the display.
3.2_Configuration for use with the SHX system
In this mode, the spotlight can be controlled by our SHX system. If the controlSHX
program does not respond correctly, check that the spotlight has been programmed as
in the table below:
Mode
Function
Value
A
DMX Control Mode
138
A138 should appear on the display.
BJ-EIFUVL UV LED Spotlight
Page 3
Selected
program
Selected
value
SET
button