Black & Decker BDPP240 Installation instructions

BDPP240
www.blackanddecker.com.au
4 Slice Sandwich Press

2
Thank you for choosing this Black & Decker product. This appliance has been designed and
manufactured to high standards of engineering and with proper use and care, as described in this
leaflet, will give you years of useful service. Please read these instructions carefully and keep them
for future reference.
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
4. Ensure that the appliance is switched off from the supply mains before cleaning or moving.
5. Use only the voltage specified on the rating plate of the appliance.
6. Keep all objects at least 1 Metre from the front, sides and rear of the appliance
7. This appliance is intended for household use only and not for commercial or industrial use.
8. Use this appliance only as described in this manual. Any other use is not recommended by
the manufacturer and may cause fire, electric shock or injury.
9. Always unplug appliance when not in use.
10. When the appliance has been unpacked, check it for transport damage and ensure all parts
have been delivered. If parts are missing or the appliance has been damaged, contact the
Black & Decker Customer Services Team.
11. If your appliance does not work, or is not working properly, contact the place of purchase.
Repair work on the appliance by unqualified persons can cause serious risk to the user.
12. Ensure hands are dry before handling the plug or the main unit.
13. Carry out regular checks of the supply cord to ensure no damage is evident.
14. Ensure that the cord is fully extended (not coiled) while in use.
15. Switch off and use handles provided when moving.
16. It is recommended that this appliance is plugged directly into the wall socket.
17. A correctly specified, undamaged extension cord may be used with this appliance provided it
is used in a safe manner.
General Care and Safety Guide

3
18. Never place appliance close to radiant heat source.
19. Never operate in areas where petrol, paint or other flammable liquids are used or stored.
20. Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
21. Never connect the appliance to mains supply until completely assembled and adjusted.
22. Never remove plug from power socket until the appliance has been switched off.
23. Never remove plug from power socket by pulling cord –always grip plug.
24. Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord has been removed from any cord storage area
and is unrolled before use.
25. Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool
or other liquids. The appliance must not be immersed in any liquids.
26. Due to the risk of injury, never use this appliance for any purpose other than its intended use.
This appliance is intended for use in household and similar applications such as staff kitchen
areas in shops, offices and other working environments; farm houses, by clients in hotels,
motels, bed and breakfast type environments and other residential type environments
27. Never use this appliance outdoors.
28. Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has
been damaged in any manner. Have the appliance checked and repaired by a qualified
electrician if repair is necessary.
29. Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
30. This appliance is not intended to be operated by means of an external timer or separate
remote control system.
General Care and Safety Guide

1. Power Indicator Light (Green)
2. Ready Indicator Light (Red)
3. Lid
4. Locking Latch
5. Handle
6. Drip tray
Components
4
1. 2.
3. 4.
5. 6.

Always choose a safe location for the sandwich press, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit before use.
This appliance requires no installation.
WARNING: STEAM MAY BE EJECTED FROM BETWEEN THE PLATES
DURING THE COOKING PROCESS. TAKE CARE NOT TO COME INTO
CONTACT WITH THE STEAM AS IT MAY CAUSE BURNS.
WARNING: CAUTION! HOT SURFACE
Place the unit on a dry, level and heat-resistant surface, away from the edge of the work surface.
Ensure that the cord has been fully unwound and does not overhang the work surface as this is a
hazard. Do not use the unit on the floor.
Before using your sandwich press for the first time, clean the appliance and plate as described in
the ‘Cleaning’ section. Brush a little cooking oil on the plate. Heat the appliance with the lid open
for 5 minutes. Unplug and allow to cool, then remove any surplus oil with absorbent paper. The
sandwich press is now ready for use. When using your sandwich press for the first time you may
notice a fine smoke haze being emitted. This is normal and is due to the initial heating of the
internal components.
1. Close the lid of the sandwich press.
2. Plug the appliance into the power supply. The red light will glow indicating that the sandwich
press is heating, whilst the green light remains off. Once the correct temperature for use has
been reached, the red light will remain on and the green light will come on. This green light
will switch on and off (temperature control).
3. Whilst the sandwich press is heating, prepare the bread and filling.
4. For golden toasted sandwiches, spread butter on the outside of the bread. Beware of some
spreads which are not suitable for toasting. Always choose bread of a suitable size to fit the
plate. Place the filling between the unbuttered sides of bread. Ensure the sandwiches are
evenly filled to assist with even browning.
5. Open the sandwich press by lifting the lid.
6. Place the sandwiches into the appliance.
7. Close the lid, using a wooden spoon or heat resistant plastic spatula to hold the bread in
place if necessary. Do not force the lid closed. If the lid is difficult to close, you may have too
much filling or the bread slices may be too thick.
8. Allow the sandwich to toast for 3-8 minutes according to taste and ensuring that raw
ingredients (e.g. bacon) are thoroughly cooked. Alternatively, pre-cook them before toasting.
Beware of steam which may escape from the front of the appliance.
9. Open the sandwich press in one swift movement and remove the toasted sandwiches. Do
not use a metal implement for this as it may damage the toasting plate.
10. After use, unplug the appliance and allow to cool.
Operating your Sandwich Press
5

Cleaning
The unit must be cleaned thoroughly after each use.
To avoid risk of electric shock, before cleaning, you MUST ALWAYS switch off and unplug the unit.
Allow the sandwich press to cool before cleaning.
DO NOT use harsh chemicals to clean the sandwich press. Use only a soft, damp cloth to gently wipe
the cooking plates and outside housing and dry well. A small amount of dishwashing liquid may be
used if necessary.
DO NOT immerse the sandwich press in water.
Once the sandwich press has cooled, the cord can be wrapped around the appliance for storage.
6

Thank you for purchasing this Black & Decker product. Your product is warranted against faults and manufacture when used in normal
domestic use for a period of one year.In non-domestic use Black & Decker limits the voluntary warranty to three months.
Black & Decker undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the
warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other
than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods
or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
Black & Decker One Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
New Zealand
CDB
PO Box 100-707
N.S.M.C
Auckland , 0745
Phone [phone]
Phone [phone]
Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone [phone]
Phone [phone]
1 Year Warranty

New Zealand CDB Media Ltd.
PO Box 100-707
North Shore Mail Centre
Auckland, 0745
Tel. [phone]
Tel. [phone]
Email [email protected]
Monday –Friday 8am-5pm
Australia CDB Goldair Australia PTY
PO Box 574
South Morang
Victoria, 3752
Tel. [phone]
Tel. [phone]
Email [e-mail]
Monday –Friday 8am-5pm
TECHNICAL SPECIFICATION
Model: BDPP240
Supply: 220-240VAC 50Hz
Wattage: 1100-1300W