Black Body AIR FLASH User manual
CAUTION
HEAT PRODUCING UNIT
DO NOT LEAVE HEATER UNATTENDED
AIR FLASH
ASSEMBLY INSTRUCTIONS
Document # 16-427
#5 Capper Drive
Pacific, MO 63069 USA
636-343-5600 / 800-654-4205
Fax: 636-343-3952 www.bbcind.com
General Operating Instructions:
1. Adjust height of heater above platen to suit specific conditions.
2. Rotate knob to level heater above platen.
3. Adjust temperature heat setting.
4. Air Flash will heat to operating temperature in approximately 5 minutes.
5. All operating/curing temperatures should be checked with a
temperature monitoring device of your choice.
6. Pretest all curing situations, inks and substrates before proceeding.
7. Position magnetic handle for operator convienance.
BBC INDUSTRIES, INC.
AIR FLASH
PARTS LIST DESCRIPTION
PART NUMBER
QTY
ITEM HEATER HEAD
N/A
11 Rotating Shaft for Stands
97-183
1
2BF Leveler-Threaded plate W/Handle Bend
BFL-01
1
3COLLAR 1 7/16 ID W/Setscrew
13-141
14 BENT BOLT97-184
15 GRIP .31 ID x 2.75L
97-185
1
6Bolt-5/16-18 x 1-1/2 HHCS ACG Black
25-1942
7WASHER 5/16 BO
23-007
4
8KNOB 5/16-18
93-022
1
9WASHER-LOCK 5/16" BO
23-0082
10 NUT-5/16-18 BO HEX
24-0092
11 Support Tube for BF Stand
97-181
1
12 Stnd. Duty Stand Legs-16"
97-182
5
13 LEVELING FEET-Bf Stand 5/16-18 Thread
90-580
514 HEX BOLT 1/4-20 x 1.25
25-00810
15 WASHER LOCK 1/4 SPLIT BO
23-00510
16 HEX NUT 1/4-20 BO
24-00410
17
1. Position Heater Head (1) face on flat level surface.
2. Install feet (14) to legs (13).
3. Install legs (13) to tube (12) with Bolts (15), washer (16) & nut (17).
4. Install tube (2), collar (4), bent bolt (5) into tube (12)
5. Slide tube (2) up & lock collar (4) to mate with leveler (3) & heater head (1) bracket.
6. Install bolts (7), washers (8), washers (10), fiber washer (18) & nuts (11)
Note: Must position fiber washers (18) between leveler (3) & heaters head (1) bracket
7. Install knob (9) & fiber washer (18) into Leveler (3)
Note: Must position fiber washers (18) between leveler (3) & heaters head (1) bracket
Tools Required: 1/2" and 7/16" open end wrench
IMPORTANT: BE SURE ALL PARTS ARE ENCLOSED.
AIR FLASH
ASSEMBLY VIEW
1
9
7
8
8
11
2
4
5
6
12
13
14
15
16
17
3
Table of contents
