Black Box Extreme T LB323A User manual

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Page 5 Page 6
© Copyright 2015. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
BLACK BOX®
Quick Start Guide
Industrial Ethernet Extender — Extreme T
LB323A
Black Box Tech
Support: FREE! Live.
24 / 7. Tech support
the way it should be.
Great tech support is just 60 seconds
away at 724-746-5500 or blackbox.com.
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax [phone]
Mailing address:
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055-1018
Web site: www.blackbox.com
E-mail: [e-mail]
Customer
Support
Information
BLACK BOX®
LB323A Quick Start Guide
lb323a_qsg_rev1
4. Apply DC Power
Connect the DC power cord to the pluggable terminal
block on the Hardened Ethernet Extender, and then
plug it into a standard DC outlet.
Connect the ground connection from the terminal
block to the grounding surface.
Figure 3. Terminal block on the extender.
5. DIP Switch
Table 2. DIP Switches
Pin Up Down
DIP Switch 1
(Site)
Auto mode Local mode
DIP Switch 2
(Type)
Turn on link
down relay
Turn off link
down relay
Distance and data rate for the Ethernet Extender port:
Table 3. Distance and Data Rate.
Distance (m) Data Rate (Mbps)
300 100
400 80
600 60
800 40
1200 20
2600 1
NOTE for Table 3: This distance/data rate information
is measured according to a testing standard in the
laboratory. The actual installation will be affected by
the quality of the copper wire and the impact of noise
disturbance. The connection speed will be affected.

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
LB323A Quick Start Guide LB323A Quick Start GuideLB323A Quick Start Guide
Page 3Page 2 Page 4
1. Unpacking
Unpack the items. Your package should include:
• One LB323A Hardened Industrial Ethernet Extender
• This printed quick start guide
If items are missing or damaged, contact Black Box
Technical Support at 724-746-5500 or info@blackbox.
com. Keep the carton and packing material.
2. Select a Location
• Installation: Desktop, Wallmount, DIN-Rail mount.
• Identify a power source within 6 feet (1.8 meters).
• Choose a dry area with ambient temperature
between -40 and +167º F (-40 and +75° C).
• Keep away from heat sources, sunlight, warm air
exhausts, hot-air vents, and heaters.
• Be sure there is adequate airflow.
• Keep the device at least 6-ft. (1.8-m) away from the
nearest source of electromagnetic noise, such as a
photocopy machine.
3. Connect to the Data Ports
1. Insert one end of the Ethernet cable into a switch
port.
2. Connect the other end into the Ethernet port of the
device.
3. Insert the voice grade copper wire between one
pair of Hardened Ethernet Extenders via the
Ethernet Extender port (RJ-11 connector or terminal
block).
Figure 1. Front view of the extender.
Figure 2. Top view of the extender.
Table 1. LEDs on the extender.
LED Color Status
Power 1, 2 Green ON = Receiving power
OFF = Power off
Ethernet Extender Port
Link Activity Green ON = Connection is
established
OFF = No connection is
established
Flashing = Port is sending
or receiving data
Line Speed Green ON = Displays the link speed
in Mbps
10/100TX port
Link/Activity Green ON = Valid network
connection
OFF = No data transmission
on port
Flashing = Port is sending
or receiving data
Speed Yellow ON = Link speed
at 100 Mbps
OFF = Link speed
at 10 Mbps